7 research outputs found
Electrospun Nanofibers for Label-Free Sensor Applications
Electrospinning is a simple, low-cost and versatile method for fabricating submicron and nano size fibers. Due to their large surface area, high aspect ratio and porous structure, electrospun nanofibers can be employed in wide range of applications. Biomedical, environmental, protective clothing and sensors are just few. The latter has attracted a great deal of attention, because for biosensor application, nanofibers have several advantages over traditional sensors, including a high surface-to-volume ratio and ease of functionalization. This review provides a short overview of several electrospun nanofibers applications, with an emphasis on biosensor applications. With respect to this area, focus is placed on label-free sensors, pertaining to both recent advances and fundamental research. Here, label-free sensor properties of sensitivity, selectivity, and detection are critically evaluated. Current challenges in this area and prospective future work is also discussed
Recommended from our members
Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites
Fabricating complex sensor platforms is still a challenge because conventional sensors are discrete, directional, and often not integrated within the system at the material level. Here, we report a facile method to fabricate bidirectional strain sensors through the integration of multiwalled carbon nanotubes (MWCNT) and multimaterial additive manufacturing. Thermoplastic polyurethane (TPU)/MWCNT filaments were first made using a two-step extrusion process. TPU as the platform and TPU/MWCNT as the conducting traces were then 3D printed in tandem using multimaterial fused filament fabrication to generate uniaxial and biaxial sensors with several conductive pattern designs. The sensors were subjected to a series of cyclic strain loads. The results revealed excellent piezoresistive responses with cyclic repeatability in both the axial and transverse directions and in response to strains as high as 50%. It was shown that the directional sensitivity could be tailored by the type of pattern design. A wearable glove, with built-in sensors, capable of measuring finger flexure was also successfully demonstrated where the sensors are an integral part of the system. These sensors have potential applications in wearable electronics, soft robotics, and prosthetics, where complex design, multi-directionality, embedding, and customizability are demanded
Thermoplastic polyurethane flexible capacitive proximity sensor reinforced by CNTs for applications in the creative industries
Wearable sensing platforms have been rapidly advanced over recent years, thanks to numerous achievements in a variety of sensor fabrication techniques. However, the development of a flexible proximity sensor that can perform in a large range of object mobility remains a challenge. Here, a polymer-based sensor that utilizes a nanostructure composite as the sensing element has been presented for forthcoming usage in healthcare and automotive applications. Thermoplastic Polyurethane (TPU)/Carbon Nanotubes (CNTs) composites are capable of detecting presence of an external object in a wide range of distance. The proximity sensor exhibits an unprecedented detection distance of 120 mm with a resolution of 0.3%/mm. The architecture and manufacturing procedures of TPU/CNTs sensor are straightforward and performance of the proximity sensor shows robustness to reproducibility as well as excellent electrical and mechanical flexibility under different bending radii and over hundreds of bending cycles with variation of 4.7% and 4.2%, respectively. Tunneling and fringing effects are addressed as the sensing mechanism to explain significant capacitance changes. Percolation threshold analysis of different TPU/CNT contents indicated that nanocomposites having 2 wt% carbon nanotubes are exhibiting excellent sensing capabilities to achieve maximum detection accuracy and least noise among others. Fringing capacitance effect of the structure has been systematically analyzed by ANSYS Maxwell (Ansoft) simulation, as the experiments precisely supports the sensitivity trend in simulation. Our results introduce a new mainstream platform to realize an ultrasensitive perception of objects, presenting a promising prototype for application in wearable proximity sensors for motion analysis and artificial electronic skin
Recommended from our members
Characterization of interlayer adhesion and fracture resistance in additively manufactured thermoplastic parts
The quality of fused deposition modeling (FDM) 3D printed parts are primarily influenced by the process conditions and mesostructural features. This study aims to establish the relationships between the process parameters/mesostructural features and the fracture resistance of printed parts. A fracture-mechanics-based methodology is developed and used to characterize the interlayer adhesion strength and the overall fracture resistance of FDM 3D printed materials. Double cantilever beam (DCB) specimens of acrylonitrile butadiene styrene (ABS) were designed and printed with a precrack at the layers' interface. Specimens were printed at different nozzle and bed temperatures, and with different layer heights and layer widths. The DCBs were loaded in an opening mode and the load-displacement curves were synchronized with the optical visualization of the crack tip to detect the critical load at the crack initiation. A finite element model, coupled with J-integral method and fracture surface analysis was then developed to obtain the apparent fracture resistance (Jcr,a) and the interlayer fracture resistance (Jcr,i), as a measure of the interlayer adhesion. The results indicated that nozzle temperature has the most significant effect on both the apparent and the interlayer fracture resistances of FDM printed materials. The apparent fracture resistance increased by ~38% with 20°C increase in the nozzle temperature from 220°C to 240°C. Similarly, the interlayer fracture resistance also increased by ~15% from 3391.04±69.83 to 3907.54±143.13 J/m2 . Bed temperature also affected the fracture resistance albeit with a milder rate. The interlayer fracture resistance increased by 7.6% from 3527.91±221.16 to 3798.54±204.04 J/m2 by a 20°C increase in the bed temperature from 85 to 105°C. The layer width appeared to be a less significant factor, compared to the nozzle and bed temperatures. Furthermore, a huge drop from 2130.73±108.37 to 731.82±47.22 J/m2 was observed in the apparent fracture resistance of printed ABS samples when the layer height was increased from 0.1 mm to 0.3 mm. This significant decrease was attributed to the mesostructure consideration through scanning electron microscopy and density investigation. Overall, this work proposes a methodology to quantify the fracture resistance of layer-by-layer printed materials and provides insights toward the design and analysis of printed materials for structural and functional applications
Thermoplastic Polyurethane/Lead Zirconate Titanate/Carbon Nanotube Composites with Very High Dielectric Permittivity and Low Dielectric Loss
Ternary composites of flexible thermoplastic polyurethane (TPU), lead zirconate titanate (PZT), and multiwalled carbon nanotubes (MWCNTs) with very high dielectric permittivity (εr) and low dielectric loss (tan δ) are reported. To assess the evolution of dielectric properties with the interactions between conductive and dielectric fillers, composites were designed with a range of content for PZT (0–30 vol%) and MWCNT (0–1 vol%). The microstructure was composed of PZT-rich and segregated MWCNT-rich regions, which could effectively prevent the formation of macroscopic MWCNT conductive networks and thus reduce the high ohmic loss. Therefore, εr increased by a maximum of tenfold, reaching up to 166 by the addition of up to 1 vol% MWCNT to TPU/PZT. More importantly, tan δ remained relatively unchanged at 0.06–0.08, a similar range to that of pure TPU. εr/tan δ ratio reached 2870 at TPU/30 vol% PZT/0.5 vol% MWCNT, exceeding most of the reported values. This work demonstrates the potential of three-phase polymer/conductive filler/dielectric filler composites for efficient charge storage applications
Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites
Fabricating complex sensor platforms is still a challenge because conventional sensors are discrete, directional, and often not integrated within the system at the material level. Here, we report a facile method to fabricate bidirectional strain sensors through the integration of multiwalled carbon nanotubes (MWCNT) and multimaterial additive manufacturing. Thermoplastic polyurethane (TPU)/MWCNT filaments were first made using a two-step extrusion process. TPU as the platform and TPU/MWCNT as the conducting traces were then 3D printed in tandem using multimaterial fused filament fabrication to generate uniaxial and biaxial sensors with several conductive pattern designs. The sensors were subjected to a series of cyclic strain loads. The results revealed excellent piezoresistive responses with cyclic repeatability in both the axial and transverse directions and in response to strains as high as 50%. It was shown that the directional sensitivity could be tailored by the type of pattern design. A wearable glove, with built-in sensors, capable of measuring finger flexure was also successfully demonstrated where the sensors are an integral part of the system. These sensors have potential applications in wearable electronics, soft robotics, and prosthetics, where complex design, multi-directionality, embedding, and customizability are demanded