In situ study of granular micromechanics in semi-solid carbon steels

The granular micromechanics of semi-solid steel at ∼80% solid are studied by synchrotron radiography. A particulate soil mechanics approach to image analysis shows that deformation occurs by the translation and rotation of quasi-rigid grains under the action of contact forces, and that the changes in directional fabric and grain–grain contacts occur by mechanisms similar to those of highly compacted soils including “locked sands”. Grain-scale phenomena are then linked to the macroscopic displacement and strain fields and it is shown that shear-induced dilation is a fundamental response at both the grain and macro scales. Based on this, recommendations are made on future rheology experiments

A Measurement of the D∗±D^{*\pm} Cross Section in Two-Photon Processes

We have measured the inclusive $D^{*\pm}$ production cross section in a two-photon collision at the TRISTAN $e^+e^-$ collider. The mean $\sqrt{s}$ of the collider was 57.16 GeV and the integrated luminosity was 150 $pb^{-1}$. The differential cross section ($d\sigma(D^{*\pm})/dP_T$) was obtained in the $P_T$ range between 1.6 and 6.6 GeV and compared with theoretical predictions, such as those involving direct and resolved photon processes.Comment: 8 pages, Latex format (article), figures corrected, published in Phys. Rev. D 50 (1994) 187

Observation of hard scattering in photoproduction events with a large rapidity gap at HERA

Events with a large rapidity gap and total transverse energy greater than 5 GeV have been observed in quasi-real photoproduction at HERA with the ZEUS detector. The distribution of these events as a function of the $\gamma p$ centre of mass energy is consistent with diffractive scattering. For total transverse energies above 12 GeV, the hadronic final states show predominantly a two-jet structure with each jet having a transverse energy greater than 4 GeV. For the two-jet events, little energy flow is found outside the jets. This observation is consistent with the hard scattering of a quasi-real photon with a colourless object in the proton.Comment: 19 pages, latex, 4 figures appended as uuencoded fil

Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels

An improved understanding of the response of solidifying microstructures to load is required to further minimize casting defects and optimize casting processes. This article overviews synchrotron radiography studies that directly measure the micromechanics of semisolid alloy deformation in a thin sample direct-shear cell. It is shown that shear-induced dilation (also known as Reynolds’ dilatancy) occurs in semisolid alloys with morphologies ranging from equiaxed-dendritic to globular, at solid fractions from the dendrite coherency point to ~90% solid, and it occurs in both Al alloys and carbon steels. Discrete-element method simulations that treat solidifying microstructures as granular materials are then used to explore the origins of dilatancy in semisolid alloys

A systematic review of musculoskeletal disorders among school teachers

<p>Abstract</p> <p>Background</p> <p>Musculoskeletal disorders (MSD) represent one of the most common and most expensive occupational health problems in both developed and developing countries. School teachers represent an occupational group among which there appears to be a high prevalence of MSD. Given that causes of MSD have been described as multi-factorial and prevalence rates vary between body sites and location of study, the objective of this systematic review was to investigate the prevalence and risk factors for MSD among teaching staff.</p> <p>Methods</p> <p>The study involved an extensive search of MEDLINE and EMBASE databases in 2011. All studies which reported on the prevalence and/or risk factors for MSD in the teaching profession were initially selected for inclusion. Reference lists of articles identified in the original search were then examined for additional publications. Of the 80 articles initially located, a final group of 33 met the inclusion criteria and were examined in detail.</p> <p>Results</p> <p>This review suggests that the prevalence of self-reported MSD among school teachers ranges between 39% and 95%. The most prevalent body sites appear to be the back, neck and upper limbs. Nursery school teachers appear to be more likely to report suffering from low back pain. Factors such as gender, age, length of employment and awkward posture have been associated with higher MSD prevalence rates.</p> <p>Conclusion</p> <p>Overall, this study suggests that school teachers are at a high risk of MSD. Further research, preferably longitudinal, is required to more thoroughly investigate the issue of MSD among teachers, with a greater emphasis on the possible wider use of ergonomic principles. This would represent a major step forward in the prevention of MSD among teachers, especially if easy to implement control measures could be recommended.</p

On the Deformation of Dendrites During Directional Solidification of a Nickel-Based Superalloy

Abstract: Synchrotron X-ray imaging has been used to examine in situ the deformation of dendrites that takes place during the solidification of a nickel-based superalloy. By combining absorption and diffraction contrast imaging, deformation events could be classified by their localization and permanence. In particular, a deformation mechanism arising from thermal contraction in a temperature gradient was elucidated through digital image correlation. It was concluded that this mechanism may explain the small misorientations typically observed in single crystal castings

Semi-solid deformation of Al-Cu alloys: a quantitative comparison between real-time imaging and coupled LBM-DEM simulations

Semi-solid alloys are deformed in a wide range of casting processes; an improved understanding and modelling capability is required to minimise defect formation and optimise productivity. Here we combine thin-sample in-situ X-ray radiography of semisolid Al-Cu alloy deformation at 40–70% solid with 2D coupled lattice Boltzmann method - discrete element method (LBM-DEM) simulations. The simulations quantitatively capture the key features of the in-situ experiments, including (i) the local contraction and dilation of the grain assembly during shear deformation; (ii) the heterogeneous strain fields and localisation features; (iii) increases in local liquid pressure in regions where liquid was expelled from the free surface in the experiment; and (iv) decreases in liquid pressure in regions where surface menisci are sucked-in in experiments. The verified DEM simulations provide new insights into the role of initial solid fraction on the stress-deformation response and support the hypothesis that the behaviour of semi-solid alloys can be described using critical state soil mechanics