Follow-up observations of X-ray emitting hot subdwarf star: the He-rich sdO BD +37{\deg} 1977

We report on the results of the first XMM-Newton satellite observation of the luminous and helium-rich O-type subdwarf BD +37{\deg} 1977 carried out in April 2014. X-ray emission is detected with a flux of about 4*10^(-14) erg/cm2/s (0.2-1.5 keV), corresponding to a f_X/f_bol ratio about 10^(-7); the source spectrum is very soft, and is well fit by the sum of two plasma components at different temperatures. Both characteristics are in agreement with what is observed in the main-sequence early-type stars, where the observed X-ray emission is due to turbulence and shocks in the stellar wind. A smaller but still significant stellar wind has been observed also in BD +37{\deg} 1977; therefore, we suggest that also in this case the detected X-ray flux has the same origin.Comment: 6 pages. Accepted for publication by Astronomy and Astrophysic

Effect of morphology and defectiveness of graphene-related materials on the electrical and thermal conductivity of their polymer nanocomposites

In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at 1700{\deg}C was carried out on both RGO to reduce their defectiveness and study the correlation between the electrical/thermal properties of the nanocomposites and the nanoflakes structure/defectiveness. The morphology and quality of the nanomaterials were investigated by means of electron microscopy, x-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Thermal, mechanical and electrical properties of the nanocomposites were investigated by means of rheology, dynamic mechanical thermal analysis, volumetric resistivity and thermal conductivity measurements. Physical properties of nanocomposites were correlated with the structure and defectiveness of nanoflakes, evidencing a strong dependence of properties on nanoflakes structure and defectiveness. In particular, a significant enhancement of both thermal and electrical conductivities was demonstrated upon the reduction of nanoflakes defectiveness

Soil erosion and carbon budget in Mediterranean vineyards

Vineyards of Mediterranean regions are characterized by low organic matter level and high sediment and nutrient erosion rates, which are the main causes of soil degradation and low sustainability of vine production. Alternative soil management - cover crops, green manure of prune residues, buffer strip- has widely applied as soil management practices to reduce soil degradation processes. However, the effectiveness of innovative soil management should be evaluated in relation to climatic and soil conditions. Many studies have been carried out in Sicilian vineyards in order to improve the sustainability with particular attention to: reduction of erosion, increase of soil organic matter, managing of nitrogen content and prune residue input. Besides the ecosystem service and its related economic aspects of the different soil management has been evaluated to analyze the wine growers and researchers demands. The aim of this work is to describe the state of art of scientific results on different soil management in Sicilian vineyards in the last 15 years, highlighting criticisms and lack of knowledge

Effect of processing conditions on the thermal and electrical conductivity of poly (butylene terephthalate) nanocomposites prepared via ring-opening polymerization

Successful preparation of polymer nanocomposites, exploiting graphene-related materials, via melt mixing technology requires precise design, optimization and control of processing. In the present work, the effect of different processing parameters during the preparation of poly (butylene terephthalate) nanocomposites, through ring-opening polymerization of cyclic butylene terephthalate in presence of graphite nanoplatelets (GNP), was thoroughly addressed. Processing temperature (240{\deg}C or 260{\deg}C), extrusion time (5 or 10 minutes) and shear rate (50 or 100 rpm) were varied by means of a full factorial design of experiment approach, leading to the preparation of polybutylene terephthalate/GNP nanocomposite in 8 different processing conditions. Morphology and quality of GNP were investigated by means of electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry and Raman spectroscopy. Molecular weight of the polymer matrix in nanocomposites and nanoflake dispersion were experimentally determined as a function of the different processing conditions. The effect of transformation parameters on electrical and thermal properties was studied by means of electrical and thermal conductivity measurement. Heat and charge transport performance evidenced a clear correlation with the dispersion and fragmentation of the GNP nanoflakes; in particular, gentle processing conditions (low shear rate, short mixing time) turned out to be the most favourable condition to obtain high conductivity values

A deep XMM-Newton serendipitous survey of a middle-latitude area

The radio quiet neutron star 1E1207.4-5209 has been the target of a 260 ks XMM-Newton observation, which yielded, as a by product, an harvest of about 200 serendipitous X-ray sources above a limiting flux of 2E-15 erg/cm2/s, in the 0.3-8 keV energy range. In view of the intermediate latitude of our field (b~10 deg), it comes as no surprise that the logN-logS distribution of our serendipitous sources is different from those measured either in the Galactic Plane or at high galactic latitudes. Here we shall concentrate on the analysis of the brightest sources in our sample, which unveiled a previously unknown Seyfert-2 galaxy.Comment: 8 pages, 7 figures, 2 tables. Accepted for publication by Astronomy & Astrophysic

Steering Behavior of an Articulated Amphibious All-Terrain Tracked Vehicle

This paper presents a study related to an Articulated Amphibious All-Terrain Tracked Vehicle (ATV) characterized by a modular architecture. The ATV is composed by two modules: The first one hosts mainly the vehicle engine and powertrain components, meanwhile the second one can be used for goods transportation, personnel carrier, crane and so on. The engine torque is transmitted to the front axle sprocket wheel of each module and finally distributed on the ground through a track mechanism. The two modules are connected through a multiaxial joint designed to guarantee four relative degrees of freedom. To steer the ATV, an Electro Hydraulic Power System (EHPS) is adopted, thus letting the vehicle steerable on any kind of terrain without a differential tracks speed. The paper aims to analyze the steady-state lateral behavior of the ATV on a flat road, through a non-linear mathematical vehicle model built in Matlab/Simulink environment. The model describes the vehicle main planar motion and the interaction between the two modules through the application of a hydraulic steering torque. The model simulates steady-state handling maneuvers in Matlab/Simulink. Two scenarios are considered: One with the application of an open-loop hydraulic steering torque without any vehicle feedback; the second one with a closed-loop steering torque actuation based on the relative angle between the two modules (hitch angle). Finally, the influence of the ATV longitudinal speed on vehicle lateral characteristics is also presented

Soil carbon budget account for the sustainability improvement of a Mediterranean vineyard area

Sustainable viticulture is suggested as an interesting strategy for achieving the objectives of global greenhouse gas (GHG) emission reduction in terms of mitigation and adaptation. However, knowledge and quantification of the contribution of sustainable vineyard management on climate change impact are needed. Although it is widely assessed by several authors that the agricultural stage has a great impact in the wine chain, very few studies have evaluated the greenhouse gas emission in this phase including the ability of soil to sequester carbon (C) or the off-farm C loss by erosion. This work aimed to provide a vineyard carbon budget (vCB) tool to quantify the impact of grape production on GHG emission including the effects of environmental characteristics and agricultural practices. The vCB was estimated considering four different soil management scenarios: conventional tillage (CT), temporary cover crop with a leguminous species in alternate inter-rows (ACC), temporary cover crop with a leguminous species (CC), permanent cover crop (PCC). The estimation of vCB was applied at territory level in a viticulture area in Sicily (2468 ha of vineyard) using empirical data. Results of the present study showed that the environmental characteristics strongly affect the sustainability of vineyard management; the highest contribution to total CO2 emission is, in fact, given by the C losses by erosion in sloping vineyards. Soils of studied vineyards are a source of CO2 due to the low C inputs and high mineralization rate, except for soil managed by CC which can sequester soil C, contributing positively to vCB. The highest total CO2 emission was estimated in vineyards under CT management (2.31 t ha−1y−1), followed by CC (1.27 t ha−1y−1), ACC (0.69 t ha−1y−1) and PCC (0.64 t ha−1y−1). Findings of vCB applied at territory level highlighted the key role of the evaluation of carbon budget (CB) on a larger scale to identify the CO2 emission in relation to climatic and environmental factors. The present study could contribute to provide suggestions to policymakers and farmers for reducing GHG emissions and promote more sustainable grape production practices

Exhibits as Scholarship: Strategies for Acceptance, Documentation, and Evaluation in Academic Libraries.

Producing exhibits is an important form of scholarly and creative activity for academic librarians, archivists, and curators. While other forms of scholarship such as publishing a book or a peer-reviewed journal article are unquestionably accepted, exhibits are typically viewed as less intellectually rigorous. Through a literature review and a review of appointment, promotion, and tenure policies of selected Association of Research Libraries institutions with faculty status, this study seeks to uphold the creation of exhibits as a critical scholarly endeavor in the academic library and to provide guidance in evaluating exhibits as scholarship for library faculty, especially those working in archives and special collections. An overview of strategies for documentation and evaluation of exhibits as noteworthy scholarly communication is included. The recommendations provided can also assist nonacademic library and archival institutions to create high-quality exhibits of enduring value. Exhibits, digital humanities projects, and other forms of scholarship and creativity should be considered for promotion and tenure if presented in a compelling way to review communities

Subspace Identification of a Glucose-Insulin model Using Meal Tracer Protocol Measurements

In this study, the problem of identifying a low complexity state space model describing glucose and insulin dynamics from low sample meal tracer experiments is investigated. Triple tracer meal protocol measurements (sampled as low as 15 samples per meal) together with continuous glucose monitoring measurements, measured concurrently at a rate of 5 minutes per sample, are used. A new formulation to estimate the missing input and output measurements at such low sample rates is developed. Nuclear norm minimization is used to exploit low rankness of the stacked input and output matrix, while the {ell1} norm is used to exploit an available sparse basis for the glucose flux profiles. Simulation results, using the UVa Padova simulator, show that the technique outperforms previous methods and also demonstrate the possibility of identifying state space models from triple tracer measurements with good prediction performance under non-ideal conditions

Control design for UAV quadrotors via embedded model control

In this paper, a control system for unmanned aerial vehicles (UAVs) is designed, tested in simulation by means of a high-fidelity simulator, and then applied to a real quadrotor UAV. A novel approach is proposed for the control design, based on the combination of two methodologies: feedback linearization (FL) and embedded model control (EMC). FL allows us to properly transform the UAV dynamics into a form suitable for EMC; EMC is then used to control the transformed system. A key feature of EMC is that it encompasses a so-called extended state observer (ESO), which not only recovers the system state but also gives a real-time estimate of all the disturbances/uncertainties affecting the system. This estimate is used by the FL-EMC control law to reject the aforementioned disturbances/uncertainties, including those collected via the FL, allowing a robustness and performance enhancement. This approach allows us to combine FL and EMC strengths. Most notably, the entire process is made systematic and application oriented. To set-up a reliable UAV attitude observer, an effective attitude sensors fusion is proposed and also benchmarked with an enhanced complementary filter. Finally, to enhance the closed-loop performance, a complete tuning procedure, encompassing frequency requirements, is outlined, based on suitably defined stability and performance metrics