705 research outputs found
The predicted compressive strength of a pyramidal lattice made from case hardened steel tubes
AbstractA sandwich panel with a core made from solid pyramidal struts is a promising candidate for multifunctional application such as combined structural and heat-exchange function. This study explores the performance enhancement by making use of hollow struts, and examines the elevation in the plastic buckling strength by either strain hardening or case hardening. Finite element simulations are performed to quantify these enhancements. Also, the sensitivity of competing collapse modes to tube geometry and to the depth of case hardening is determined. A comparison with other lattice materials reveals that the pyramidal lattice made from case hardened steel tubes outperforms lattices made from solid struts of aluminium or titanium and has a comparable strength to a core made from carbon fibre reinforced polymers
Recommended from our members
Vacancy diffusion and its consequences for void growth at the interface of a stripping metal electrode and solid electrolyte
It is commonly observed that voids can nucleate and grow in the lithium anode of a solid state Li-ion battery at a location adjacent to the solid electrolyte during the stripping (discharge) phase of the battery; a similar phenomenon is observed in sodium-based batteries. It is hypothesised in the current literature that the formation of these voids is due to the coalescence of vacancies that have been generated at the electrode/electrolyte interface when metal atoms are oxidized and transported into the electrolyte: the slow diffusion of the vacancies away from the electrolyte interface into the adjacent electrode results in their coalescence and the consequent growth of voids. These hypotheses are challenged in the current study by using the Onsager formalism to generate a variational principle for vacancy diffusion. Our analysis reveals that no driving force exists for the diffusion of vacancies into a homogeneous metal electrode that thins by stripping. This finding is contrary to models in the literature which have mistakenly assumed that the vanishing flux at the current collector prevents rigid body motion (drift) of the electrode which in turn prevents thinning of the electrode during stripping. Based on our analysis, we conclude that vacancy diffusion within a homogeneous electrode is not responsible for the nucleation and growth of voids at the interface between a stripping metal electrode and a solid electrolyte
Recommended from our members
Numerical simulation of the edge stress singularity and the adhesion strength for compliant mushroom fibrils adhered to rigid substrates
Bio-inspired adhesion of micropatterned surfaces due to intermolecular interactions has attracted much research interest over the last decade. Experiments show that the best adhesion is achieved with compliant “mushroom”-shaped fibrils. This paper analyses numerically the effects of different mushroom shapes on adhesion to a rigid substrate. When a remote stress is applied on the free end of a fibril perfectly bonded to a rigid substrate, the resultant stress distribution along the fibril is found to change dramatically between the straight punch and mushroom fibrils. A singular stress field is present at the edge of the fibril where it contacts the substrate and, in this work, the amplitude of the singularity is evaluated for fibrils perfectly bonded to a flat substrate so that sliding cannot occur there. This exercise is carried out for fibril geometries involving combinations of different diameters and thicknesses of the mushroom cap. By assuming a pre-existing detachment length at the corner where the stress singularity lies, we predict the adhesive strength for various mushroom cap shapes. Our study shows that a smaller stalk diameter and a thinner mushroom cap lead to higher adhesive strengths. A limited number of results are also given for other shapes, including those having a fillet radius connecting the stalk to the cap. The results support the rational optimization of synthetic micropatterned adhesives
The mechanical and electrical properties of direct-spun carbon nanotube mats
The mechanical and electrical properties of a direct-spun carbon nanotube mat are measured. The mat comprises an interlinked random network of nanotube bundles, with approximately 40 nanotubes in a bundle. A small degree of in-plane anisotropy is observed. The bundles occasionally branch, and the mesh topology resembles a 2D lattice of nodal connectivity slightly below 4. The macroscopic in-plane tensile response is elasto-plastic in nature, with significant orientation hardening. In-situ microscopy reveals that the nanotube bundles do not slide past each other at their junctions under macroscopic strain. A micromechanical model is developed to relate the macroscopic modulus and flow strength to the longitudinal shear response of the nanotube bundles. The mechanical and electrical properties of the mat are compared with those of other nanotube arrangements over a wide range of density
- …