Prevalence and tick loads in Nguni cattle reared in different environmental conditions across four provinces of South Africa

BACKGROUND AND AIM: In tropical and subtropical countries, ixodid ticks are among livestock’s most economically important ectoparasites. Although Nguni cattle from South Africa have adapted to harsh environments, it is unknown whether they will be resistant to ticks, and the diseases carried by ticks under various climatic conditions. Therefore, this study aimed to compare tick load and estimate the prevalence of different tick species among Nguni cattle under different environmental conditions. MATERIALS AND METHODS: Tick counts were conducted monthly under natural challenges over 2 years on 586 Nguni cattle located at ARC-Roodeplaat and Loskop farms (warmer climate), Mukhuthali Nguni Community and the University of Fort Hare farms (cooler climate). The generalized linear model procedure of the Statistical Analysis System was used to analyze the data. It fitted the location (farm), sex, year, month or season, and animal age as covariates. RESULTS: The tick species (relative prevalence) observed were as follows: Amblyomma hebraeum (42%), Rhipicephalus evertsi (22%), Rhipicephalus (Boophilus) spp. (16%), Rhipicephalus appendiculatus (11%), Hyalomma marginatum (5%), and Rhipicephalus simus (4%). Tick infestation was significantly affected by location, season, year, month of the tick counting and age of the animal. Loskop farm had the highest tick count (m = 30.69) and showed the largest variation in tick count. Compared to the other seasons, higher tick counts were seen during the hot-dry (September–November) and hot-wet (December–February) seasons. A. hebraeum was the dominant tick species across all four farms, followed by R. evertsi. The perianal region (under the tail head), the perineum and the belly body locations were the most preferred tick attachment sites. CONCLUSION: These results provide useful information for developing appropriate control strategies for ticks and tick-borne diseases in these provinces of South Africa. Further work must investigate the feasibility of genetic improvement for tick resistance

Nova tehnologija proizvodnje magnezijevih traka i limova

A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm). The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.Nova tehnologija proizvodnje magnezijevih traka i limova. Nova tehnologija proizvodnje magnezijevih traka utemeljena dvostruko-valjanje-lijevanje i valjanje trake je razvijeno u Freibergu-Njemačka. Motri se, ovom ekonomičnom metodom je moguća proizvoditi trake za duboko izvlačenje, sa dobrim plastičnim svojstvima uz zadovoljavajući zahtjev za nisku cijenu Mg trake za automobilsku i elektronsku industriju. Oboje, svitak i pojedinačne trake su poizvedene i valjane do debljine stjenke 1mm(0,5 mm). Prikazuje se tehnologija novog postupka i svojstva dvostrukog valjanog-lijevačkog materijala i završnih traka

Nova tehnologija proizvodnje magnezijevih traka i limova

A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm). The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.Nova tehnologija proizvodnje magnezijevih traka i limova. Nova tehnologija proizvodnje magnezijevih traka utemeljena dvostruko-valjanje-lijevanje i valjanje trake je razvijeno u Freibergu-Njemačka. Motri se, ovom ekonomičnom metodom je moguća proizvoditi trake za duboko izvlačenje, sa dobrim plastičnim svojstvima uz zadovoljavajući zahtjev za nisku cijenu Mg trake za automobilsku i elektronsku industriju. Oboje, svitak i pojedinačne trake su poizvedene i valjane do debljine stjenke 1mm(0,5 mm). Prikazuje se tehnologija novog postupka i svojstva dvostrukog valjanog-lijevačkog materijala i završnih traka

Effects of oxidized lipids (4,5 (E)-epoxy-2(E)-heptenal and 4,5 (E)-epoxy-2 (E) -decenal) and lysine reaction products on zinc and calcium utilization: assays in Caco-2 cells

The influence of the presence of brown products from the reaction between two oxidized lipids (4,5 (E)-epoxy-2(E)-heptenal, EH, and 4,5 (E)-epoxy-2 (E)-decenal, ED) and lysine (EH-L and ED-L) on zinc and calcium utilization was studied, and compared with a fructosyl-lysine mixture (F-L). Assays were carried out in Caco-2 cells grown in bicameral chambers. The Zn transported across the cell monolayer was significantly lower in the presence of the EH-L, ED-L and F-L samples, specially with EH-L. Significant decreases in Zn uptake were also observed, with no differences between samples. However, calcium transport was not modified. Thus, the assayed lipid-aminoacid brown products seem to have negative effects on Zn availability, whereas Ca availability appears to be unaffected.Se estudió la influencia de la presencia de productos obtenidos en la reacción de dos lípidos oxidados (4,5(E)-epoxy-2(E)- heptenal, EH, y 4,5(E)-epoxy-2(E)-decenal, ED) con el aminoácido lisina (EH-L y ED-L), sobre la absorción de zinc y calcio, comparándolos frente a una mezcla de fructosil-lisina (F-L). Los ensayos se realizaron con células Caco-2 sembradas en placas bicamerales. La adición de las muestras EH-L, ED-L y F-L al medio de cultivo supuso una reducción significativa en el Zn transportado a través de la monocapa de células, mucho más marcada ante la presencia de EH-L. También se redujo significativamente la captación celular de Zn, sin diferencias entre las distintas muestras ensayadas. Sin embargo, el transporte de Ca no se vio modificado. Por lo tanto, los productos pardos lípido-aminoacídicos ensayados parecen afectar negativamente la disponibilidad del Zn, sin tener efectos notables sobre la del Ca.Peer reviewe

Non invasive detection and localization of microplastic particles in a sandy sediment by complementary neutron and X ray tomography

PURPOSE: Microplastics have become a ubiquitous pollutant in marine, terrestrial and freshwater systems that seriously affects aquatic and terrestrial ecosystems. Common methods for analysing microplastic abundance in soil or sediments are based on destructive sampling or involve destructive sample processing. Thus, substantial information about local distribution of microplastics is inevitably lost. METHODS: Tomographic methods have been explored in our study as they can help to overcome this limitation because they allow the analysis of the sample structure while maintaining its integrity. However, this capability has not yet been exploited for detection of environmental microplastics. We present a bimodal 3D imaging approach capable to detect microplastics in soil or sediment cores non-destructively. RESULTS: In a first pilot study, we demonstrate the unique potential of neutrons to sense and localize microplastic particles in sandy sediment. The complementary application of X-rays allows mineral grains to be discriminated from microplastic particles. Additionally, it yields detailed information on the 3D surroundings of each microplastic particle, which supports its size and shape determination. CONCLUSION: The procedure we developed is able to identify microplastic particles with diameters of approximately 1 mm in a sandy soil. It also allows characterisation of the shape of the microplastic particles as well as the microstructure of the soil and sediment sample as depositional background information. Transferring this approach to environmental samples presents the opportunity to gain insights of the exact distribution of microplastics as well as their past deposition, deterioration and translocation processes

Capturing 3D Water Flow in Rooted Soil by Ultra fast Neutron Tomography

AbstractWater infiltration in soil is not only affected by the inherent heterogeneities of soil, but even more by the interaction with plant roots and their water uptake. Neutron tomography is a unique non-invasive 3D tool to visualize plant root systems together with the soil water distribution in situ. So far, acquisition times in the range of hours have been the major limitation for imaging 3D water dynamics. Implementing an alternative acquisition procedure we boosted the speed of acquisition capturing an entire tomogram within 10 s. This allows, for the first time, tracking of a water front ascending in a rooted soil column upon infiltration of deuterated water time-resolved in 3D. Image quality and resolution could be sustained to a level allowing for capturing the root system in high detail. Good signal-to-noise ratio and contrast were the key to visualize dynamic changes in water content and to localize the root uptake. We demonstrated the ability of ultra-fast tomography to quantitatively image quick changes of water content in the rhizosphere and outlined the value of such imaging data for 3D water uptake modelling. The presented method paves the way for time-resolved studies of various 3D flow and transport phenomena in porous systems.</jats:p

Orientational order parameters of a de Vries–type ferroelectric liquid crystal obtained by polarized Raman spectroscopy and x-ray diffraction

The orientational order parameters 〈P2〉 and 〈P4〉 of the ferroelectric, de Vries–type liquid crystal 9HL have been determined in the SmA* and SmC* phases by means of polarized Raman spectroscopy, and in the SmA* phase using x-ray diffraction. Quantum density functional theory predicts Raman spectra for 9HL that are in good agreement with the observations and indicates that the strong Raman band probed in the experiment corresponds to the uniaxial, coupled vibration of the three phenyl rings along the molecular long axis. The magnitudes of the orientational order parameters obtained in the Raman and x-ray experiments differ dramatically from each other, a discrepancy that is resolved by considering that the two techniques probe the orientational distributions of different molecular axes. We have developed a systematic procedure in which we calculate the angle between these axes and rescale the orientational order parameters obtained from x-ray scattering with results that are then in good agreement with the Raman data. At least in the case of 9HL, the results obtained by both techniques support a “sugar loaf” orientational distribution in the SmA* phase with no qualitative difference to conventional smectics A. The role of individual molecular fragments in promoting de Vries–type behavior is considered

An AC susceptometer for the characterization of large, bulk superconducting samples

The main purpose of this work was to design, develop and construct a simple, low-cost AC susceptometer to measure large, bulk superconducting samples (up to 32 mm in diameter) in the temperature range 78-120 K. The design incorporates a double heating system that enables a high heating rate (25 K/hour) while maintaining a small temperature gradient (< 0.2 K) across the sample. The apparatus can be calibrated precisely using a copper coil connected in series with the primary coil. The system has been used successfully to measure the temperature dependence of the AC magnetic properties of entire RE-Ba-Cu-O [(RE)BCO] bulk superconducting domains. A typical AC susceptibility measurement run from 78 K to 95 K takes about 2 hours, with excellent temperature resolution (temperature step ~ 4 mK) around the critical temperature, in particular.Comment: 25 pages, 7 figures. Accepted for publication in Measurement Science and Technolog

Beam Vacuum Interconnects for the LHC Cold Arcs

The design of the beam vacuum interconnect is described in this paper. Features include a novel RF bridge design to maximise lateral flexibility during cryostat Cold arcs of the LHC will consist of twin aperture dipole, quadrupole and corrector magnets in cryostats, operating at 1.9 K. Beam vacuum chambers, along with all connecting elements require flexible 'interconnects' between adjacent cryostats to allow for thermal and mechanical offsets foreseen during machine operation and alignment. In addition, the beam vacuum chambers contain perforated beam screens to intercept beam induced heat loads at an intermediate temperature. These must also be connected with low impedance RF bridges in the interconnect zones.alignment and so-called 'nested' bellows to minimise the required length of the assembly