Influence of Calcined Clay on Workability of Mortars with Low-carbon Cement

The second-largest industrial global emitter of CO2 (Carbon dioxide) is the cement sector. The technology roadmap of low carbon transition for cement industries includes the introduction of calcined clay (CC) as supplementary cementitious material. A new type of alternative binder, called Limestone Calcined Clay Cement (LC3), was recently proposed. This cement can reduce CO2 emissions of cement production by up to 40% and it is prepared using limestone (LS) and clay which are globally available. Many scientific studies aimed to investigate the hydration of LC3 to understand the contribution of CC to the development of the compressive strength. However, recent studies showed that other cement properties, like workability and water demand, are highly impacted by calcined clay. Despite some papers state that an increase in superplasticizer (SP) dosage compensate this effect, such concrete is usually sticky, and hard to handle and deal with. In this sense, a proper understanding of the mechanisms regulating rheology of LC3 is needed. The objective of this study is to analyze workability of CC-based cement pastes and mortar, specifically investigating the role of free water in particle suspensions. Preliminary results show that CC highly influences workability of mortars and pastes. The flow table test results highlight a need to increase SP dosage to achieve target workability with CC cements. Differential scanning calorimetry (DSC) and 1 H time domain-nuclear magnetic resonance (TD-NMR) results clarify that the capillary unbound water is rapidly consumed by CC, being thus unavailable to fluidify cement pastes. This multi-method approach provides a further step in understanding CC impact on workability of mortars with low-carbon cement and opens new ways to understand paste, mortar, and concrete workability

Negative attitudes related to violence against women: gender and ethnic differences among youth living in Serbia

OBJECTIVES: This study aimed to identify to what extent negative attitudes towards intimate partner violence against women are present among young women and men living in Serbia, in Roma and non-Roma settlements. METHODS: We used the data from the 2010 Multiple Indicator Cluster Survey conducted in Serbia, for the respondents who were 15-24 years old. Regression analyses were used to examine the association between judgmental attitudes, socio-demographic factors and life satisfaction. RESULTS: In Roma settlements, 34.8% of men and 23.6% of women believed that under certain circumstances men are justified to be violent towards wives, while among non-Roma it was 5.6 and 4.0%, respectively. These negative attitudes were significantly associated with lower educational level, lower socio-economic status and being married. In multivariate model, in both Roma and non-Roma population women who were not married were less judgmental, while the richest Roma men were least judgmental (OR 0.40, 95% CI 0.18-0.87). CONCLUSIONS: Violence prevention activities have to be focused on promoting gender equality among youth in vulnerable population groups such as Roma, especially through social support, strengthening their education and employment

The burden of breast, cervical, and colon and rectum cancer in the Balkan countries, 1990–2019 and forecast to 2030.

Background Despite effective prevention and control strategies, in countries of the Balkan region, cancers are the second leading cause of mortality, closely following circulatory system diseases. Objective To describe trends in the burden of breast, cervical, and colon and rectum cancer in the Balkan region and per country between 1990 and 2019, including a forecast to 2030. Methods We described the 2019 Global Burden of Disease (GBD) estimates for breast, cervical, and colon and rectum cancers in eleven Balkan countries over the period 1990–2019, including incidence, years lived with disability (YLD), years of life lost (YLL), and disability-adjusted life years (DALYs) rates per 100,000 population and accompanied 95% uncertainty interval. With the Autoregressive Integrated Moving Average, we forecasted these rates per country up to 2030. Results In the Balkan region, the highest incidence and DALYs rates in the study period were for colon and rectum, and breast cancers. Over the study period, the DALYs rates for breast cancer per 100,000 population were the highest in Serbia (reaching 670.84 in 2019) but the lowest in Albania (reaching 271.24 in 2019). In 2019, the highest incidence of breast cancer (85 /100,000) and highest YLD rate (64 /100,000) were observed in Greece. Romania had the highest incidence rates, YLD rates, DALY rates, and YLL rates of cervical cancer, with respective 20.59%, 23.39% 4.00%, and 3.47% increases for the 1990/2019 period, and the highest forecasted burden for cervical cancer in 2030. The highest incidence rates, YLD rates and DALY rates of colon and rectum cancers were continuously recorded in Croatia (an increase of 130.75%, 48.23%, and 63.28%, respectively), while the highest YLL rates were in Bulgaria (an increase of 63.85%). The YLL rates due to colon and rectum cancers are forecasted to progress by 2030 in all Balkan countries. Conclusion As most of the DALYs burden for breast, cervical, and colon and rectum cancer is due to premature mortality, the numerous country-specific barriers to cancer early detection and quality and care continuum should be a public priority of multi-stakeholder collaboration in the Balkan region

Environmental challenges for construction materials: potential use of calcined clay in cement

Concrete is the most widely used construction material for infrastructures and buildings. Cement, concrete’s key ingredient, has a dramatic carbon footprint as clinker production is responsible for about 7% of the world’s CO2 emissions. For this reason, European Standard EN 197-5 was updated in 2021 to allow formulation of new cement type containing from 50% to 64% of clinker, while previous versions allowed at minimum 65% of clinker, the main responsible for CO2 emission. This is made possible by a combination of limestone and calcined clay to replace partial clinker content. The properties of the new Limestone Calcined Clay Cement (LC3) have been studied over the last few years in terms of chemistry and hydration, showing that this material exhibits promising properties concerning cement reactivity and sustainability. However, workability studies on calcined clay cements showed that higher amount of admixture is required to provide rheological properties comparable to Ordinary Portland Cement (OPC), with drastic influence on mechanical properties. Analysis of literature studies and technical gaps that need to be further investigated will be presented to the scientific community to give an overview of the advances in construction materials, also providing some results from ongoing experimental research

Performance of concretes manufactured with newly developed low-clinker cements exposed to water and chlorides: Characterization by means of electrical impedance measurements

This paper discusses the electrical impedance behaviour, measured according to the Wenner's method, of three different concrete mixes during accelerated degradation tests. Being a first attempt to move from laboratory to in-field applications targeted to long-term monitoring, the same electrode array configuration and set-up (AC current at 10 kHz) is used. Results show that electrical impedance decreases down to 24% in capillary water absorption tests, 77% and 86% in salt-spray chamber and wet/dry cycles with 3.5% NaCl solution, respectively. The two new low-clinker cements adopted seem to improve the measurement sensitivity towards contaminants ingress with respect to the commercial one (reference)

Performance of concretes manufactured with newly developed low-clinker cements exposed to water and chlorides: Characterization by means of electrical impedance measurements

This paper discusses the electrical impedance behaviour, measured according to the Wenner’s method, of three different concrete mixes during accelerated degradation tests. Being a first attempt to move from laboratory to in-field applications targeted to long-term monitoring, the same electrode array configuration and set-up (AC current at 10 kHz) is used. Results show that electrical impedance decreases down to 24% in capillary water absorption tests, 77% and 86% in salt-spray chamber and wet/dry cycles with 3.5% NaCl solution, respectively. The two new low-clinker cements adopted seem to improve the measurement sensitivity towards contaminants ingress with respect to the commercial one (reference)

Experimental study on 3D printing of concrete with overhangs

The construction industry has been receiving in the recent past years the 3D printing technology as an emerging technology. Several researchers and companies have been reporting a number of case studies that show the possibilities of this technology regarding the dimensions, shape, building time, finishing and the material characteristics. It is commonly accepted that one of the big advantages of 3D printing is its possibility regarding the shape of the printed object since it can be easily changed each time a new piece is printed. This possibility raises some challenges regarding the printing limits, that are needed to the project design, such as to create overhangs. In this sense, a work was carried out to evaluate and optimize concrete printing mixtures and assess the 3D concrete printing of elements with overhangs. This paper presents the work carried out, showing the optimization of mixture composition for the binder/aggregate ratio, cement/fly ash ratio, and amount of superplasticizer and hardening accelerator, and evaluating their printing performance and mechanical properties. Printing of overhangs was possible for angles with the vertical direction till 17.5º.info:eu-repo/semantics/publishedVersio

The burden of breast, cervical, and colon and rectum cancer in the Balkan countries, 1990-2019 and forecast to 2030

BACKGROUND: Despite effective prevention and control strategies, in countries of the Balkan region, cancers are the second leading cause of mortality, closely following circulatory system&nbsp;diseases. OBJECTIVE: To describe trends in the burden of breast, cervical, and colon and rectum cancer in the Balkan region and per country between 1990 and 2019, including a forecast to&nbsp;2030. METHODS: We described the 2019 Global Burden of Disease (GBD) estimates for breast, cervical, and colon and rectum cancers in eleven Balkan countries over the period 1990-2019, including incidence, years lived with disability (YLD), years of life lost (YLL), and disability-adjusted life years (DALYs) rates per 100,000 population and accompanied 95% uncertainty interval. With the Autoregressive Integrated Moving Average, we forecasted these rates per country up to&nbsp;2030. RESULTS: In the Balkan region, the highest incidence and DALYs rates in the study period were for colon and rectum, and breast cancers. Over the study period, the DALYs rates for breast cancer per 100,000 population were the highest in Serbia (reaching 670.84 in 2019) but the lowest in Albania (reaching 271.24 in 2019). In 2019, the highest incidence of breast cancer (85 /100,000) and highest YLD rate (64 /100,000) were observed in Greece. Romania had the highest incidence rates, YLD rates, DALY rates, and YLL rates of cervical cancer, with respective 20.59%, 23.39% 4.00%, and 3.47% increases for the 1990/2019 period, and the highest forecasted burden for cervical cancer in 2030. The highest incidence rates, YLD rates and DALY rates of colon and rectum cancers were continuously recorded in Croatia (an increase of 130.75%, 48.23%, and 63.28%, respectively), while the highest YLL rates were in Bulgaria (an increase of 63.85%). The YLL rates due to colon and rectum cancers are forecasted to progress by 2030 in all Balkan&nbsp;countries. CONCLUSION: As most of the DALYs burden for breast, cervical, and colon and rectum cancer is due to premature mortality, the numerous country-specific barriers to cancer early detection and quality and care continuum should be a public priority of multi-stakeholder collaboration in the Balkan&nbsp;region.</p