560 research outputs found
Dislocation interactions mediated by grain boundaries
The dynamics of dislocation assemblies in deforming crystals indicate the
emergence of collective phenomena, intermittent fluctuations and strain
avalanches. In polycrystalline materials, the understanding of plastic
deformation mechanisms depends on grasping the role of grain boundaries on
dislocation motion. Here the interaction of dislocations and elastic, low angle
grain boundaries is studied in the framework of a discrete dislocation
representation. We allow grain boundaries to deform under the effect of
dislocation stress fields and compare the effect of such a perturbation to the
case of rigid grain boudaries. We are able to determine, both analytically and
numerically, corrections to dislocation stress fields acting on neighboring
grains, as mediated by grain boundary deformation. Finally, we discuss
conclusions and consequences for the avalanche statistics, as observed in
polycrystalline samples.Comment: 13 pages, 5 figure
Теоретичний аналіз динаміки розвитку творчої активності дошкільника
(uk) У статті проаналізовано динаміку розвитку творчої активності дошкільника. Зазначається, що процес формування особистості дошкільника досягається під час самореалізації її в творчій діяльності. Особлива увага приділена характеристиці етапів розвитку свідомості та творчій взаємодії «дитина – дорослий». Обґрунтовується необхідність створення сприятливих умов щодо творчої активності дошкільника.(ru) В статье проанализирована динамика развития творческой активности дошкольника. Отмечается, что процесс формирования личности дошкольника достигается во время самореализации ее в творческой деятельности. Особое внимание уделено характеристике этапов развития сознания и творческому взаимодействию «ребенок – взрослый». Обосновывается необходимость создания благоприятных условий относительно творческой активности дошкольника
Plate-impact loading of cellular structures formed by selective laser melting
Porous materials are of great interest because of improved energy absorption over their solid counterparts. Their properties, however, have been difficult to optimize. Additive manufacturing has emerged as a potential technique to closely define the structure and properties of porous components, i.e. density, strut width and pore size; however, the behaviour of these materials at very high impact energies remains largely unexplored. We describe an initial study of the dynamic compression response of lattice materials fabricated through additive manufacturing. Lattices consisting of an array of intersecting stainless steel rods were fabricated into discs using selective laser melting. The resulting discs were impacted against solid stainless steel targets at velocities ranging from 300 to 700 m s-1 using a gas gun. Continuum CTH simulations were performed to identify key features in the measured wave profiles, while 3D simulations, in which the individual cells were modelled, revealed details of microscale deformation during collapse of the lattice structure. The validated computer models have been used to provide an understanding of the deformation processes in the cellular samples. The study supports the optimization of cellular structures for application as energy absorbers. © 2014 IOP Publishing Ltd
Modelling the small punch tensile behaviour of an aerospace alloy
The small punch (SP) test is a widely accepted methodology for obtaining mechanical property information from limited material quantities. Much research has presented the creep, tensile and fracture responses of numerous materials gathered from small-scale testing approaches. This is of particular interest for alloy down selection of next-generation materials and in situ mechanical assessments. However, to truly understand the evolution of deformation of the miniature disc specimen, an accurate and detailed understanding of the progressive damage is necessary. This paper will utilise the SP test to assess the tensile properties of several Ti–6Al–4V materials across different temperature regimes. Fractographic investigations will establish the contrasting damage mechanisms and finite element modelling through DEFORM software is employed to characterise specimen deformation
Thermally enhanced mechanical properties of arc evaporated Ti0.34Al0.66N/TiN multilayer coatings
Atomic-scale modeling of the deformation of nanocrystalline metals
Nanocrystalline metals, i.e. metals with grain sizes from 5 to 50 nm, display
technologically interesting properties, such as dramatically increased
hardness, increasing with decreasing grain size. Due to the small grain size,
direct atomic-scale simulations of plastic deformation of these materials are
possible, as such a polycrystalline system can be modeled with the
computational resources available today.
We present molecular dynamics simulations of nanocrystalline copper with
grain sizes up to 13 nm. Two different deformation mechanisms are active, one
is deformation through the motion of dislocations, the other is sliding in the
grain boundaries. At the grain sizes studied here the latter dominates, leading
to a softening as the grain size is reduced. This implies that there is an
``optimal'' grain size, where the hardness is maximal.
Since the grain boundaries participate actively in the deformation, it is
interesting to study the effects of introducing impurity atoms in the grain
boundaries. We study how silver atoms in the grain boundaries influence the
mechanical properties of nanocrystalline copper.Comment: 10 pages, LaTeX2e, PS figures and sty files included. To appear in
Mater. Res. Soc. Symp. Proc. vol 538 (invited paper). For related papers, see
http://www.fysik.dtu.dk/~schiotz/publist.htm
Infrared seeded parametric four-wave mixing for sensitive detection of molecules
We have developed a sensitive resonant four-wave mixing technique based on two-photon parametric four-wave mixing with the addition of a phase matched ''seeder'' field. Generation of the seeder field via the same four-wave mixing process in a high pressure cell enables automatic phase matching to be achieved in a low pressure sample cell. This arrangement facilitates sensitive detection of complex molecular spectra by simply tuning the pump laser. We demonstrate the technique with the detection of nitric oxide down to concentrations more than 4 orders of magnitude below the capability of parametric four-wave mixing alone, with an estimated detection threshold of 10(12) molecules/cm(3)
A continuum plasticity model that accounts for hardening and size effects in thin films
Non-Equilibrium Evolution Thermodynamics Theory
Alternative approach for description of the non-equilibrium phenomena arising
in solids at a severe external loading is analyzed. The approach is based on
the new form of kinetic equations in terms of the internal and modified free
energy. It is illustrated by a model example of a solid with vacancies, for
which there is a complete statistical ground. The approach is applied to the
description of important practical problem - the formation of fine-grained
structure of metals during their treatment by methods of severe plastic
deformation. In the framework of two-level two-mode effective internal energy
potential model the strengthening curves unified for the whole of deformation
range and containing the Hall-Petch and linear strengthening sections are
calculated.Comment: 7 pages, 1 figur
WPA position statement on prisoner mental and public health care
As a group, prisoners have a tendency not to engage effectively with healthcare services while they
are in the community because they have so many other competing priorities. Other priorities may
include access to adequate finance, finding a place to sleep that is dry and safe, having sufficient
food for themselves and their families, or the need to meet existing addictions. However, as a
group, they present with high levels of health morbidity across domains of physical and mental
health and addictions.
It is widely established that screening people for healthcare conditions at the point when they are
received into prison can assist in identifying a range of medical conditions. Although the process
has limitations, the practice of screening is recommended internationally.
After screening has taken place, healthcare services are meant to be provided in prisons to the
same extent and quality as would be available in the community, yet across the world, there have
often been problems in ensuring the adequacy of prison healthcare systems. Prison healthcare
departments have often lagged behind regarding funding, and many countries have reported
problems with the quality and consistency of delivery. Also, issues with training and continuous
professional development are often cited as problematic in this area.
This curriculum has been prepared to assist countries in ensuring that systems are in place for the
effective training and continuous professional development of staff. It is meant to assist those who
design such programs for local use
- …