Assessment of fissionable material behaviour in fission chambers

A comprehensive study is performed in order to assess the pertinence of fission chambers coated with different fissile materials for high neutron flux detection. Three neutron scenarios are proposed to study the fast component of a high neutron flux: (i) high neutron flux with a significant thermal contribution such as BR2, (ii) DEMO magnetic fusion reactor, and (iii) IFMIF high flux test module. In this study, the inventory code ACAB is used to analyze the following questions: (i) impact of different deposits in fission chambers; (ii) effect of the irradiation time/burn-up on the concentration; (iii) impact of activation cross-section uncertainties on the composition of the deposit for all the range of burn-up/irradiation neutron fluences of interest. The complete set of nuclear data (decay, fission yield, activation cross-sections, and uncertainties) provided in the EAF2007 data library are used for this evaluation

Nuclear data requirements for the ADS conceptual design EFIT: Uncertainty and sensitivity study

In this paper, we assess the impact of activation cross-section uncertainties on relevant fuel cycle parameters for a conceptual design of a modular European Facility for Industrial Transmutation (EFIT) with a “double strata” fuel cycle. Next, the nuclear data requirements are evaluated so that the parameters can meet the assigned design target accuracies. Different discharge burn-up levels are considered: a low burn-up, corresponding to the equilibrium cycle, and a high burn-up level, simulating the effects on the fuel of the multi-recycling scenario. In order to perform this study, we propose a methodology in two steps. Firstly, we compute the uncertainties on the system parameters by using a Monte Carlo simulation, as it is considered the most reliable approach to address this problem. Secondly, the analysis of the results is performed by a sensitivity technique, in order to identify the relevant reaction channels and prioritize the data improvement needs. Cross-section uncertainties are taken from the EAF-2007/UN library since it includes data for all the actinides potentially present in the irradiated fuel. Relevant uncertainties in some of the fuel cycle parameters have been obtained, and we conclude with recommendations for future nuclear data measurement programs, beyond the specific results obtained with the present nuclear data files and the limited available covariance information. A comparison with the uncertainty and accuracy analysis recently published by the WPEC-Subgroup26 of the OECD using BOLNA covariance matrices is performed. Despite the differences in the transmuter reactor used for the analysis, some conclusions obtained by Subgroup26 are qualitatively corroborated, and improvements for additional cross sections are suggested

Differences in the robustness of clusters involving the Mycobacterium tuberculosis strains most frequently isolated from immigrant cases in Madrid

AbstractTuberculosis cases infected by the same Mycobacterium tuberculosis (MTB) strain are considered to be clustered and involved in a transmission chain. Large clusters are assumed to represent active transmission chains in a population. In the present study, we focused on the analysis of large clusters defined by IS6110-restriction fragment length polymorphism (RFLP) typing in the immigrant population in Madrid. We identified 12 large clusters (involving 43% of the isolates) comprising 4–23 representatives. We proposed a gradient of epidemiological certainty for these large clusters. For a cluster to be considered robust and a good indicator of recent transmission, the MTB strain involved should not have been identified in a geographically and epidemiologically unrelated population and the cluster had to be re-confirmed by another highly discriminative molecular marker (MIRU-VNTR). The clusters that we discovered were classified into three categories: high, intermediate and low expected epidemiological value. In the largest cluster in the study (cluster M6; 23 representatives), failures by both criteria were identified: the representative seven-band RFLP pattern was also the most prevalent in the unrelated population (25 cases) and the cluster was fully split by MIRU-15, suggesting a lack of epidemiological value. The RFLP pattern representative of this cluster was also identified in 64 isolates from five countries in the Latin American genotype database, and again proved to be heterogeneous according to the MIRU-15 analysis. Specific analysis of large clusters, combined with the application of criteria for evaluating their robustness, could help identify uninformative clusters and target epidemiological resources towards those clusters with higher expected epidemiological value

Characterization of Mycobacterium tuberculosis Beijing isolates from the Mediterranean area

<p>Abstract</p> <p>Background</p> <p>The Beijing lineage of <it>Mycobacterium tuberculosis </it>is causing concern due to its global distribution and its involvement in severe outbreaks. Studies focused on this lineage are mainly restricted to geographical settings where its prevalence is high, whereas those in other areas are scarce. In this study, we analyze Beijing isolates in the Mediterranean area, where this lineage is not prevalent and is mainly associated with immigrant cases.</p> <p>Results</p> <p>Only 1% (N = 26) of the isolates from two population-based studies in Spain corresponded to Beijing strains, most of which were pan-susceptible and from Peruvian and Ecuadorian patients. Restriction fragment length polymorphism typing with the insertion sequence IS<it>6110 </it>identified three small clusters (2-3 cases). Mycobacterial interspersed repetitive unit-variable number tandem repeat typing (MIRU-15) offered low discriminatory power, requiring the introduction of five additional loci. A selection of the Beijing isolates identified in the Spanish sample, together with a sample of Beijing strains from Italy, to broaden the analysis context in the Mediterranean area, were assayed in an infection model with THP-1 cells. A wide range of intracellular growth rates was observed with only two isolates showing an increased intracellular replication, in both cases associated with contained production of TNF-α. No correlation was observed between virulence and the Beijing phylogenetic group, clustered/orphan status, or resistance. The Beijing strain responsible for extensive spread on Gran Canaria Island was also identified in Madrid, but did not lead to secondary cases and did not show high infectivity in the infection model.</p> <p>Conclusions</p> <p>The Beijing lineage in our area is a non-homogeneous family, with only certain highly virulent representatives. The specific characterization of Beijing isolates in different settings could help us to accurately identify the virulent representatives before making general assumptions about this lineage.</p

New neurons use Slit-Robo signaling to migrate through the glial meshwork and approach a lesion for functional regeneration

After brain injury, neural stem cell–derived neuronal precursors (neuroblasts) in the ventricular-subventricular zone migrate toward the lesion. However, the ability of the mammalian brain to regenerate neuronal circuits for functional recovery is quite limited. Here, using a mouse model for ischemic stroke, we show that neuroblast mi-gration is restricted by reactive astrocytes in and around the lesion. To migrate, the neuroblasts use Slit1-Robo2 signaling to disrupt the actin cytoskeleton in reactive astrocytes at the site of contact. Slit1-overexpressing neu-roblasts transplanted into the poststroke brain migrated closer to the lesion than did control neuroblasts. These neuroblasts matured into striatal neurons and efficiently regenerated neuronal circuits, resulting in functional recovery in the poststroke mice. These results suggest that the positioning of new neurons will be critical for func-tional neuronal regeneration in stem/progenitor cell–based therapies for brain injury

Education and Training of Future Nuclear Engineers at DIN: From Advanced Computer Codes to an Interactive Plant Simulator

ABSTRACT This paper summarizes the work being performed at the Department of Nuclear Engineering (www.din.upm.es) of the Universidad Politécnica de Madrid to improve the education and training of future Spanish nuclear engineers according to the Bologna rules. We present two main efforts introduced in our programme: i) the understanding of the current computational methodologies/codes starting from the nuclear data processing, then the lattice and core calculations codes, and finally the power plant simulators, ii) the development of practical teaching-learning experiences with an Interactive Graphical Simulator of a real nuclear power plant

A comparative study of Monte Carlo-coupled depletion codes applied to a Sodium Fast Reactor design loaded with minor actinides

inor actinides (MAs) transmutation is a main design objective of advanced nuclear systems such as generation IV Sodium Fast Reactors (SFRs). In advanced fuel cycles, MA contents in final high level waste packages are main contributors to short term heat production as well as to long-term radiotoxicity. Therefore, MA transmutation would have an impact on repository designs and would reduce the environment burden of nuclear energy. In order to predict such consequences Monte Carlo (MC) transport codes are used in reactor design tasks and they are important complements and references for routinely used deterministic computational tools. In this paper two promising Monte Carlo transport-coupled depletion codes, EVOLCODE and SERPENT, are used to examine the impact of MA burning strategies in a SFR core, 3600 MWth. The core concept proposal for MA loading in two configurations is the result of an optimization effort upon a preliminary reference design to reduce the reactivity insertion as a consequence of sodium voiding, one of the main concerns of this technology. The objective of this paper is double. Firstly, efficiencies of the two core configurations for MA transmutation are addressed and evaluated in terms of actinides mass changes and reactivity coefficients. Results are compared with those without MA loading. Secondly, a comparison of the two codes is provided. The discrepancies in the results are quantified and discussed

Classical and quantum integrability in 3D systems

In this contribution, we discuss three situations in which complete integrability of a three dimensional classical system and its quantum version can be achieved under some conditions. The former is a system with axial symmetry. In the second, we discuss a three dimensional system without spatial symmetry which admits separation of variables if we use ellipsoidal coordinates. In both cases, and as a condition for integrability, certain conditions arise in the integrals of motion. Finally, we study integrability in the three dimensional sphere and a particular case associated with the Kepler problem in $S^3$.Comment: plenary talk on the Conference QTS-5, July 2007, Valladolid, Spai