The Effect of Common-Mode Voltage Elimination on the Iron Loss in Machine Core Laminations of Multilevel Drives

This paper studies the effect of common-mode voltage elimination (CMVE) on the iron loss of electrical machine core laminations under multilevel converter supply. Three identical magnetic ring cores are excited by either a three-level converter or a five-level voltage source converter to study the behavior of CMVE on a three-phase system. Both multilevel converters are controlled by using a space vector pulse width modulation as it is one of the most often used techniques for CMVE. These experimental results are confirmed numerically with a dynamic iron loss model. In addition, the effect of CMVE, at different switching frequencies, on the core loss of a synchronous machine is numerically studied. The results presented in this paper show that the core loss is considerably increased when the CMVE is implemented. However this iron loss increase in five-level drive systems is lower compared to the three-level ones. Therefore, it is important that the designers of drive systems take such effects into consideration.Peer reviewe

Synthesis of hierarchical wo3 microspheres for photoelectrochemical water splitting application

In this work, hierarchical WO3 microspheres were synthesized using chemical bath deposition. The morphology of the synthesized sample was studied using scanning electron microscopy (SEM). The hierarchical WO3 microspheres formed from spontaneously self-assembled nanosheets have a high specific surface area. Structural characterizations of sample were performed using X-ray diffraction (XRD) and Raman spectroscopy. Analysis of XRD spectra showed that synthesized particles have a monoclinic modification. The optical properties of the sample were studied using UV-Vis diffuse reflectance absorption spectra. The value of the energy gap calculated from the absorption spectra is 2.2 eV, which indicates high light absorption ability. A photocurrent study was done to investigate the photocatalytic activity. The photoelectrode was prepared using hierarchical WO3 microspheres and polymer deposited on fluorine doped tin oxide (FTO) glass via spin coating technique. A remarkable photocurrent density of 18 A/cm2 at 0.5 V was achieved. The elongated structures improved light absorption ability and photocatalytic activity

A twist in chiral interaction between biological helices

Using an exact solution for the pair interaction potential, we show that long, rigid, chiral molecules with helical surface charge patterns have a preferential interaxial angle ~((RH)^1/2)/L, where L is the length of the molecules, R is the closest distance between their axes, and H is the helical pitch. Estimates based on this formula suggest a solution for the puzzle of small interaxial angles in a-helix bundles and in cholesteric phases of DNA.Comment: 7 pages, 2 figures, PDF file onl

Suppression of Phase Separation in LiFePO4 Nanoparticles During Battery Discharge

Using a novel electrochemical phase-field model, we question the common belief that LixFePO4 nanoparticles separate into Li-rich and Li-poor phases during battery discharge. For small currents, spinodal decomposition or nucleation leads to moving phase boundaries. Above a critical current density (in the Tafel regime), the spinodal disappears, and particles fill homogeneously, which may explain the superior rate capability and long cycle life of nano-LiFePO4 cathodes.Comment: 27 pages, 8 figure

Some Directions for Performance Improvement of Li-Ion Batteries out of Usual Paths

Recent developments at IMN will be shared on several research directions out of usual paths for performance improvement of Li-ion batteries. We will focus on innovative surface modifications of electrode components, new electrode compositions and architectures, and failure mechanism upon cycling by in-depth characterization through coupled advanced spectroscopic techniques. A molecular grafting approach has been proposed as a way to modify the interfacial chemical reactivity of oxide materials, which is detrimental to their long-term energy storage properties as electrodes of Li-ion batteries. Surface derivatization of powder oxide materials such as Li1.2V3O8 and Li(Mn,Ni)2O4 was accomplished by in situ electrografting of a diazonium salt during Li-ion intercalation, leading to a covalently bonded organic multilayer. Charge transfer is not impeded, while electrolyte decomposition is inhibited thus increasing the cycle life and decreasing the self-discharge. Carbon additives of classical porous electrodes occupy a large volume fraction which is lost for charge storage. Redox functionalization of the surface of some carbon additives has been successfully achieved through non-covalent grafting chemistry using multi-redox pyrene molecules synthesized on purpose. Such functionalized carbon additives have been used to increase the stored energy and power of C-coated LFP porous electrodes. Thicker electrodes are needed for higher energy density Li-ion batteries. We evaluate different directions in order to design new innovative electrode architectures for such a purpose. Our grafting chemistry has been further developed to achieve molecular junctions between non-carbon-coated LFP and multiwall carbon nanotubes (MWCNT) using a designed thiophene-based conjugated molecule. The strategy enables original architecturing of the cathode of Li-ion batteries, with the individual MWCNT being electronically nanocontacted at the surface of LFP grains. This advancement leads to much higher specific capacity and better capacity retention for non calendared thick electrodes, for which the electronic wiring of the electroactive material grains is a critical issue. Another direction followed is the use of conducting polymer additives in porous electrodes, which are able to act as both conducting fillers and mechanical reinforcement materials. We have synthesized a new form of lithium doped PANI, the excellent properties of which in terms of specific capacity, stability on cycling and rate capability will be presented. The coating of bare LFP particles with thin layers of this new Li-doped PANI allows surpassing the performance of commercial carbon coated LFP thick electrodes. The role of this PANI additive into millimetric thick electrodes of NMC material will also be discussed. Future developments of higher energy density Si-based Li-ion batteries depend on the mastering of side reactions at the Si anode. We will compare the SEI composition and morphology at the Si surface upon cycling in half cell and full Li-ion cell configurations using a combination of 7Li, 19F MAS NMR, XPS, TOF-SIMS and STEM-EELS. The origin of the much faster aging of Si-based full cells versus half cells and future directions for improvement will be discusse

Measurement of Charged-Pion Production in Deep-Inelastic Scattering Off Nuclei with the CLAS Detector

Background: Energetic quarks in nuclear deep-inelastic scattering propagate through the nuclear medium. Processes that are believed to occur inside nuclei include quark energy loss through medium-stimulated gluon bremsstrahlung and intranuclear interactions of forming hadrons. More data are required to gain a more complete understanding of these effects. Purpose: To test the theoretical models of parton transport and hadron formation, we compared their predictions for the nuclear and kinematic dependence of pion production in nuclei. Methods: We have measured charged-pion production in semi-inclusive deep-inelastic scattering off D, C, Fe, and Pb using the CLAS detector and the CEBAF 5.014-GeV electron beam. We report results on the nuclear-to-deuterium multiplicity ratio for π+ and π− as a function of energy transfer, four-momentum transfer, and pion energy fraction or transverse momentum—the first three-dimensional study of its kind. Results: The π+ multiplicity ratio is found to depend strongly on the pion fractional energy z and reaches minimum values of 0.67 ± 0.03, 0.43 ± 0.02, and 0.27 ± 0.01 for the C, Fe, and Pb targets, respectively. The z dependencies of the multiplicity ratios for π+ and π− are equal within uncertainties for C and Fe targets but show differences at the level of 10% for the Pb-target data. The results are qualitatively described by the GiBUU transport model, as well as with a model based on hadron absorption, but are in tension with calculations based on nuclear fragmentation functions. Conclusions: These precise results will strongly constrain the kinematic and flavor dependence of nuclear effects in hadron production, probing an unexplored kinematic region. They will help to reveal how the nucleus reacts to a fast quark, thereby shedding light on its color structure and transport properties and on the mechanisms of the hadronization process