Biaxial fatigue loading of notched composites

Thin walled, 2.54-cm (1-in.) diameter tubular specimens of T300/934 graphite/epoxy were fabricated and fatigue cycled in combinations of axial, torsional, and internal pressure loading. Two different four-ply layup configurations were tested: (0/90)S and (+ or - 45)S; all tubes contained a 0.48-cm (3/16-in.) diameter circular hole penetrating one wall midway along the tube length. S-N curves were developed to characterize fatigue behavior under pure axial, torsional, or internal pressure loading, as well as combined loading fatigue. A theory was developed based on the Hill plane stress model which enabled the S-N curve for combined stress states to be predicted from the S-N data for the uniaxial loading modes. Correlation of the theory with the experimental data proved to be remarkably good

The role of tool geometry in process damped milling

The complex interaction between machining structural systems and the cutting process results in machining instability, so called chatter. In some milling scenarios, process damping is a useful phenomenon that can be exploited to mitigate chatter and hence improve productivity. In the present study, experiments are performed to evaluate the performance of process damped milling considering different tool geometries (edge radius, rake and relief angles and variable helix/pitch). The results clearly indicate that variable helix/pitch angles most significantly increase process damping performance. Additionally, increased cutting edge radius moderately improves process damping performance, while rake and relief angles have a smaller and closely coupled effect

Pipeline network features and leak detection by cross-correlation analysis of reflected waves

This paper describes progress on a new technique to detect pipeline features and leaks using signal processing of a pressure wave measurement. Previous work (by the present authors) has shown that the analysis of pressure wave reflections in fluid pipe networks can be used to identify specific pipeline features such as open ends, closed ends, valves, junctions, and certain types of bends. It was demonstrated that by using an extension of cross-correlation analysis, the identification of features can be achieved using fewer sensors than are traditionally employed. The key to the effectiveness of the technique lies in the artificial generation of pressure waves using a solenoid valve, rather than relying upon natural sources of fluid excitation. This paper uses an enhanced signal processing technique to improve the detection of leaks. It is shown experimentally that features and leaks can be detected around a sharp bend and up to seven reflections from features/ leaks can be detected, by which time the wave has traveled over 95 m. The testing determined the position of a leak to within an accuracy of 5%, even when the location of the reflection from a leak is itself dispersed over a certain distance and, therefore, does not cause an exact reflection of the wave

Oceanic adults, coastal juveniles: tracking the habitat use of whale sharks off the Pacific coast of Mexico

Eight whale sharks tagged with pop-up satellite archival tags off the Gulf of California, Mexico, were tracked for periods of 14–134 days. Five of these sharks were adults, with four females visually assessed to be pregnant. At least for the periods they were tracked, juveniles remained in the Gulf of California while adults moved offshore into the eastern Pacific Ocean. We propose that parturition occurs in these offshore waters. Excluding two juveniles that remained in the shallow tagging area for the duration of tracking, all sharks spent 65 ± 20.7% (SD) of their time near the surface, even over deep water, often in association with frontal zones characterized by cool-water upwelling. While these six sharks all made dives into the meso- or bathypelagic zones, with two sharks reaching the maximum depth recordable by the tags (1285.8 m), time spent at these depths represented a small proportion of the overall tracks. Most deep dives (72.7%) took place during the day, particularly during the early morning and late afternoon. Pronounced habitat differences by ontogenetic stage suggest that adult whale sharks are less likely to frequent coastal waters after the onset of maturity

James J. Kaput (1942–2005) imagineer and futurologist of mathematics education

Jim Kaput lived a full life in mathematics education and we have many reasons to be grateful to him, not only for his vision of the use of technology in mathematics, but also for his fundamental humanity. This paper considers the origins of his ‘big ideas’ as he lived through the most amazing innovations in technology that have changed our lives more in a generation than in many centuries before. His vision continues as is exemplified by the collected papers in this tribute to his life and work

Magnetorheological landing gear: 2. Validation using experimental data

Aircraft landing gears are subjected to a wide range of excitation conditions with conflicting damping requirements. A novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids. In part 1 of this contribution, a methodology was developed that enables the geometry of a flow mode MR valve to be optimized within the constraints of an existing passive landing gear. The device was designed to be optimal in terms of its impact performance, which was demonstrated using numerical simulations of the complete landing gear system. To perform the simulations, assumptions were made regarding some of the parameters used in the MR shock strut model. In particular, the MR fluid's yield stress, viscosity, and bulk modulus properties were not known accurately. Therefore, the present contribution aims to validate these parameters experimentally, via the manufacture and testing of an MR shock strut. The gas exponent, which is used to model the shock strut's nonlinear stiffness, is also investigated. In general, it is shown that MR fluid property data at high shear rates are required in order to accurately predict performance prior to device manufacture. Furthermore, the study illustrates how fluid compressibility can have a significant influence on the device time constant, and hence on potential control strategies

Positronic lithium, an electronically stable Li-e+^+ ground state

Calculations of the positron-Li system were performed using the Stochastic Variational Method and yielded a minimum energy of -7.53208 Hartree for the L=0 ground state. Unlike previous calculations of this system, the system was found to be stable against dissociation into the Ps + Li$^+$ channel with a binding energy of 0.00217 Hartree and is therefore electronically stable. This is the first instance of a rigorous calculation predicting that it is possible to combine a positron with a neutral atom and form an electronically stable bound state.Comment: 11 pages, 2 tables. To be published in Phys.Rev.Let

MoonLITE – Technological feasibility of the penetrator concept

Introduction: While the surface missions to the Moon of the 1960s and 1970s achieved a great deal, scientifically a great deal was also left unresolved. The recent plethora of lunar missions (flown or proposed) reflects resurgence in interest in the Moon, not only in its own right, but also as a record of the formation of the Earth-Moon System and the interplanetary environment at 1 AU. Results from orbiter missions have indicated the possible presense of ice within permanently shaded craters at the lunar poles [1] – a situation that, if confirmed, will have profound impacts on lunar exploration

Contextual factors among indiscriminate or larger attacks on food or water supplies, 1946-2015

This research updates previous inventories of malicious attacks on food and water to include data from 1946 through mid-2015. A systematic search of news reports, databases and previous inventories of poisoning events was undertaken. Incidents that threatened or were intended to achieve direct harm to humans, and that were either relatively large (number of victims > 4 or indiscriminate in intent or realisation were included. Agents could be chemical, biological or radio-nuclear. Reports of candidate incidents were subjected to systematic inclusion and exclusion criteria as well as validity analysis (not always clearly undertaken in previous inventories of such attacks). We summarise contextual aspects of the attacks that may be important for scenario prioritisation, modelling and defensive preparedness. Opportunity is key to most realised attacks, particularly access to dangerous agents. The most common motives and relative success rate in causing harm were very different between food and water attacks. The likelihood that people were made ill or died also varied by food/water mode, and according to motive and opportunity for delivery of the hazardous agent. Deaths and illness associated with attacks during food manufacture and prior to sale have been fewer than those in some other contexts. Valuable opportunities for food defence improvements are identified in other contexts, especially food prepared in private or community settings