Sensitive Spectrophotometric Determination of Atenolol in Pharmaceutical Formulations Using Bromate-Bromide Mixture as an Eco-Friendly Brominating Agent

Three simple and sensitive spectrophotometric methods are proposed for the determination of atenolol (ATN) in bulk drug and tablets. The methods are based on the bromination of ATN by the bromine generated in situ by the action of the acid on the bromate–bromide mixture followed by the determination of unreacted bromine by reacting with a fixed amount of either meta-cresol purple (MCP) and measuring the absorbance at 540 nm (method A) and 445 nm (method B) or erioglaucine (EGC) and measuring the absorbance at 630 nm (method C). Beer's law is valid within the concentration ranges of 1.0–20.0, 2.0–40.0 and 1.0–8.0 μg/mL for method A, method B and method C, respectively. The calculated molar absorptivities were found to be 1.20×10(4), 4.51×10(3) and 3.46 × 10(4)  L/mol · cm for method A, method B and method C, respectively. Sandell's sensitivity values, correlation coefficients, limits of detection and quantification are also reported. Recovery results were statistically compared with those of a reference method by applying Student's t- and F-test. The novelty of the present study is the measurement of two different colors using MCP, that is, red-pink color of MCP in acid medium at 540 nm and yellowish-orange color of brominated MCP at 445 nm

Iodometric determination of milligram and microgram amounts of levocetirizine in pharmaceuticals

Four simple, selective and sensitive methods are described for the determination of levocetirizine dihydrochloride (LCT) in bulk drug and in tablets. The methods exploit the well-known analytical reaction between iodide and iodate in the presence of acid solution. Iodide present is oxidized by iodate in an amount equivalent to the HCl present in LCT to iodine and the liberated iodine is determined by four different procedures which inturn quantify LCT at varying detection range and sensitiveness. Two direct titrimetric procedures involve titration of iodine by thiosulphate either towards starch end point (method A) or potentiometrically (method B). Both the methods have a reaction stiochiometry of 1: 1 (LCT: liberated iodine) and have quantification ranges of 2–20 mg LCT for method A and method B. The liberated iodine is also measured spectrophotometrically at 350 nm (method C) or the iodine-starch complex measured at 570 nm (method D). In both the methods, the absorbance is found to be linearly dependent on the concentration of iodine which in turn is related to LCT concentration. The calibration curves are linear over 5–40 and 1.25–12.5 mg mL−1 LCT for method C and method D, respectively. The calculated molar absorptivity and Sandel sensitivity values are 1.0 × 104 L mol−1 cm−1 and 0.0435 mg cm−2, respectively for method C, and their respective values for method D are 2.9 × 104 L mol−1 cm−1 and 0.0156 mg cm−2. The intra-day and inter-day accuracy and precision studies were carried according to the ICH guidelines. The method was successfully applied to the analysis of two brands of tablets LCT. The accuracy was also checked by placebo blank and synthetic mixture analyses besides recovery study via standard addition procedure

Changes in the source and transport mechanism of terrigenous input to the Indian sector of southern ocean during the late quaternary and its palaeoceanographic implications

Changes in the terrigenous sediment source and transport mechanisms during the late Quaternary have been investigated using four sediment cores within the Indian sector of Southern Ocean, using the magnetic susceptibility (MS) and sedimentological records. Sediments deposited during the Holocene and other interglacial periods were characterised by low MS, low sand content, reduced ice-rafted detritus (IRD) input and increased illite possibly transported via hydrographic advection from the south. The glacial intervals are characterised by high MS, high sand content, increased IRD input and reduced illite clays, derived from both local as well as Antarctic sources. Significant reduction in clay fraction and illite content during glacials suggests that the erosive and transporting capabilities of the deep and bottom waters could have reduced compared to the interglacial times. The changes in terrigenous influx to this region were significantly influenced by the rhythmic glacial–interglacial fluctuations in bottom circulation and the position of the Polar Front

Validirane RP-RP-HPLC i TLC metode za simultano određivanje tamsulozin hidroklorida i finasterida u istom dozirnom pripravku

Reversed phase high-performance liquid chromatography (RP-HPLC) and thin-layer chromatography (TLC) methods have been developed and validated for simultaneous estimation of tamsulosin hydrochloride and finasteride in bulk drug and in combined dosage forms. RP-HPLC separation was achieved on a Phenomenex C18 column using methanol/0.02 mol L-1 ammonium acetate buffer/triethylamine (79.9 + 20 + 0.1, V/V/V) (pH 9.2) as mobile phase. The TLC separation was achieved on an aluminium-backed layer of silica gel 60F254 using toluene/methanol/triethylamine (9 + 1.5 + 1, V/V/V) as eluent. Quantification was achieved with photodiode array (PDA) detection at 235 nm over the concentration range 0.5–16 and 150 µg mL1 with mean recovery of 99.8 ± 0.9 and 100.0 ± 0.8 % for tamsulosin hydrochloride and finasteride, respectively, by the RP-HPLC method. Quantification was achieved with UV detection at 270 nm over the concentration range 100–2000 ng per spot and 250–5000 ng per spot with mean recovery of 98.9 ± 0.9 and 99.6 ± 0.7 % for tamsulosin hydrochloride and finasteride, respectively, by the TLC method. Both methods are simple, precise, accurate and sensitive and are applicable to the simultaneous determination of tamsulosin hydrochloride and finasteride in bulk drug and in combined dosage forms.U radu su opisani razvoj i validacija inverzno fazne kromatografije visoke učinkovitosti (RP-HPLC) i tankoslojne kromatografije (TLC) za simultano određivanje tamsulozin hidroklorida i finasterida kao čistih supstancija i u kombiniranim tabletama. Za RP-HPLC odjeljivanje korištena je Phenomenex C18 kolona (250 mm, 4,6 mm, 5 µm) i metanol/0,02 mol L–1 pufer s amonijevim acetatom/trietilamin (79,9+20+0,1, V/V/V) (pH 9,2) kao pokretna faza, pri protoku 1 mL min-1. TLC odjeljivanje rađeno je na silikagelu 60F254 na aluminijskoj podlozi, koristeći toluen/metanol/trietilamin (9+1,5+1, V/V/V) kao eluens. Za detekciju u RP-HPLC metodi korištena je fotodioda (PDA) pri 235 nm te je provedena kvantitacija u koncentracijskom području 0,5–16 µg mL–1 i 1–50 µg mL–1, uz srednji analitički povrat od 99,8 ± 0,9 % za tamsulozin hidroklorid i 100,0 ± 0,8 % za finasterid. Za kvantitaciju u TLC metodi korištena je UV detekcija pri 270 nm u koncentracijskom području 100–2000 ng po točki za tamsulozin hidroklorid i 250–5000 ng po točki za finasterid, uz srednji analitički povrat od 98,9 ± 0,9, odnosno 99,6 ± 0,7 %. Obje metode su jednostavne, precizne, točne i osjetljive i mogu se primijeniti za simultano određivanje tamsulozin hidroklorida i finasterida kao čistih supstancija i u kombiniranim dozirnim oblicima

Titrimetric and spectrophotometric assay of diethylcarbamazine citrate in formulations using iodate and iodide mixture as reagents

One titrimetric and two spectrophotometric methods are proposed for the determination of diethylcarbamazine citrate (DEC) in bulk drug and in formulations using potassium iodate and potassium iodide as reagent. The methods employ the well-known analytical reaction between iodate and iodide in the presence of acid. In titrimetry (method A), the drug was treated with a measured excess of thiosulfate in the presence of unmeasured excess of iodate-iodide mixture and after a standing time of 10 min, the surplus thiosulfate was determined by back titration with iodine towards starch end point. Titrimetric assay is based on a 1:3 reaction stoichiometry between DEC and iodine and the method is applicable over 2.0-10.0 mg range. The liberated iodine is measured spectrophotometrically at 370 nm (method B) or the iodine-starch complex measured at 570 nm (method C). In both methods, the absorbance is found to be linearly dependent on the concentration of iodine, which in turn is related to DEC concentration. The calibration curves are linear over 2.5-50 and 2.5-30 µg mL-1 DEC for method B and method C, respectively. The calculated molar absorptivity and Sandell sensitivity values were 6.48×103 L mol-1 cm-1 and 0.0604 µg cm-2, respectively, for method B, and their respective values for method C are 9.96×103 L mol-1 cm-1 and 0.0393 µg cm-2. The intra-day and inter-day accuracy and precision studies were carried out according to the ICH guidelines. The methods were successfully applied to the analysis of DEC formulations

Nonhalogenated organic molecules from Laurencia algae

The marine red algae of the genus Laurencia have produced more 700 secondary metabolites and exhibited high molecular diversity and intriguing bioactivity. Since the halogenated structures have been comprehensively reviewed previously, this review, covering up to the end of 2012, mainly focuses on the source, structure elucidation, and bioactivity of nonhalogenated organic molecules from Laurencia spp. as well as the relationship between nonhalogenated and halogenated products. Overall, 173 new or new naturally occurring compounds with 58 skeletons, mainly including sesquiterpenes, diterpenes, triterpenes, and C15-acetogenins, are described.The marine red algae of the genus Laurencia have produced more 700 secondary metabolites and exhibited high molecular diversity and intriguing bioactivity. Since the halogenated structures have been comprehensively reviewed previously, this review, covering up to the end of 2012, mainly focuses on the source, structure elucidation, and bioactivity of nonhalogenated organic molecules from Laurencia spp. as well as the relationship between nonhalogenated and halogenated products. Overall, 173 new or new naturally occurring compounds with 58 skeletons, mainly including sesquiterpenes, diterpenes, triterpenes, and C-15-acetogenins, are described