The morphology, evolution and seismic visibility of partial melt at the core-mantle boundary: Implications for ULVZs

SUMMARY Seismic observations indicate that the lowermost mantle above the core–mantle boundary (CMB) is strongly heterogeneous. Body waves reveal a variety of ultra-low velocity zones (ULVZs), which extend not more than 100 km above the CMB and have shear velocity reductions of up to 30 per cent. While the nature and origin of these ULVZs remain uncertain, some have suggested they are evidence of partial melting at the base of mantle plumes. Here we use coupled geodynamic/thermodynamic modelling to explore the hypothesis that present-day deep mantle melting creates ULVZs and introduces compositional heterogeneity in the mantle. Our models explore the generation and migration of melt in a deforming and compacting host rock at the base of a plume in the lowermost mantle. We test whether the balance of gravitational and viscous forces can generate partially molten zones that are consistent with the seismic observations. We find that for a wide range of plausible melt densities, permeabilities and viscosities, lower mantle melt is too dense to be stirred into convective flow and instead sinks down to form a completely molten layer, which is inconsistent with observations of ULVZs. Only if melt is less dense or at most ca. 1 per cent more dense than the solid, or if melt pockets are trapped within the solid, can melt remain suspended in the partial melt zone. In these cases, seismic velocities would be reduced in a cone at the base of the plume. Generally, we find partial melt alone does not explain the observed ULVZ morphologies and solid-state compositional variation is required to explain the anomalies. Our findings provide a framework for testing whether seismically observed ULVZ shapes are consistent with a partial melt origin, which is an important step towards constraining the nature of the heterogeneities in the lowermost mantle and their influence on the thermal, compositional and dynamic evolution of the Earth.ER

A multi-club analysis of the locomotor training characteristics of elite female soccer players

Objective: Quantifying differences in locomotor characteristics of training between two competition levels and between training days within elite female soccer players. Methods: Foot-mounted inertial measurement unit (Playermaker) data were collected from 293 players from three Women’s Super League (WSL; n = 76) and eight Women’s Championship (WC; n = 217) teams over a 28-week period. Data were analysed using partial least squares correlation analysis to identify relative variable importance and linear mixed effects models to identify magnitude of effects. Results: WSL players performed more high-speed running distance (HSR; &gt;5.29 m∙s −1), sprint distance (SpD; &gt;6.26 m∙s −1), acceleration (ACC; &gt;3 m∙s −2) and deceleration (DEC; &lt;-3 m∙s −2) distance than WC players. The largest difference between WSL and WC in HSR and HSR per minute occurred on MD-4, (354.7 vs. 190.29 m and 2.8 vs. 1.7 m∙min −1). On MD-2, WSL players also covered greater SpD (44.66 vs. 12.42 m), SpD per minute (0.38 vs. 0.11 m∙min −1) and HSR per minute (1.67 vs. 0.93 m∙min −1). Between training days both WSL and WC teams reduced HSR and SpD but not ACC and DEC distance from MD-4 to MD-2, with MD-4 the highest training day of the week. Conclusion: MD-4 is a key training day discriminating between competitive level. HSR and SpD volume and intensity is tapered in WSL and WC players, however there is less clear taper of ACC or DEC. As such, WC teams could increase the volume and intensity of HSR on MD-4 to mimic locomotor activities of those at a higher standard.</p

Concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit to measure velocity during team sport activity

The concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit (F-IMU) was investigated during linear and change of direction running drills. Sixteen individuals performed four repetitions of two drills (maximal acceleration and flying 10 m sprint) and five repetitions of a multi-directional movement protocol. Participants wore two F-IMUs (Playermaker) and 10 retro-reflective markers to allow for comparisons to the criterion system (Qualisys). Validity of the F-IMU derived velocity was assessed via root-mean-square error (RMSE), 95% limits of agreement (LoA) and mean difference with 95% confidence interval (CI). Between-unit reliability was assessed via intraclass correlation (ICC) with 90% CI and 95% LoA. The mean difference for instantaneous velocity for all participants and drills combined was −0.048 ± 0.581 m ∙ s −1, the LoA were from −1.09 to −1.186 m ∙ s −1 and RMSE was 0.583 m ∙ s −1. The ICC ranged from 0.84 to 1, with LoA from −7.412 to 2.924 m ∙ s −1. Differences were dependent on the reference speed, with the greatest absolute difference (−0.66 m ∙ s −1) found at velocities above 7 m ∙ s −1. Between-unit reliability of the F-IMU ranges from good to excellent for all locomotor characteristics. Playermaker has good agreement with 3D motion capture for velocity and good to excellent between-unit reliability.</p

Concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit to measure velocity during team sport activity

The concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit (F-IMU) was investigated during linear and change of direction running drills. Sixteen individuals performed four repetitions of two drills (maximal acceleration and flying 10 m sprint) and five repetitions of a multi-directional movement protocol. Participants wore two F-IMUs (Playermaker) and 10 retro-reflective markers to allow for comparisons to the criterion system (Qualisys). Validity of the F-IMU derived velocity was assessed via root-mean-square error (RMSE), 95% limits of agreement (LoA) and mean difference with 95% confidence interval (CI). Between-unit reliability was assessed via intraclass correlation (ICC) with 90% CI and 95% LoA. The mean difference for instantaneous velocity for all participants and drills combined was -0.048 ± 0.581 m ∙ s-1, the LoA were from -1.09 to -1.186 m ∙ s-1 and RMSE was 0.583 m ∙ s-1. The ICC ranged from 0.84 to 1, with LoA from -7.412 to 2.924 m ∙ s-1. Differences were dependent on the reference speed, with the greatest absolute difference (-0.66 m ∙ s-1) found at velocities above 7 m ∙ s-1. Between-unit reliability of the F-IMU ranges from good to excellent for all locomotor characteristics. Playermaker has good agreement with 3D motion capture for velocity and good to excellent between-unit reliability

A multi-club analysis of the locomotor training characteristics of elite female soccer players.

OBJECTIVE: Quantifying differences in locomotor characteristics of training between two competition levels and between training days within elite female soccer players. METHODS: Foot-mounted inertial measurement unit (Playermaker) data were collected from 293 players from three Women's Super League (WSL; n = 76) and eight Women's Championship (WC; n = 217) teams over a 28-week period. Data were analysed using partial least squares correlation analysis to identify relative variable importance and linear mixed effects models to identify magnitude of effects. RESULTS: WSL players performed more high-speed running distance (HSR; >5.29 m∙s-1), sprint distance (SpD; >6.26 m∙s-1), acceleration (ACC; >3 m∙s-2) and deceleration (DEC; <-3 m∙s-2) distance than WC players. The largest difference between WSL and WC in HSR and HSR per minute occurred on MD-4, (354.7 vs. 190.29 m and 2.8 vs. 1.7 m∙min-1). On MD-2, WSL players also covered greater SpD (44.66 vs. 12.42 m), SpD per minute (0.38 vs. 0.11 m∙min-1) and HSR per minute (1.67 vs. 0.93 m∙min-1). Between training days both WSL and WC teams reduced HSR and SpD but not ACC and DEC distance from MD-4 to MD-2, with MD-4 the highest training day of the week. CONCLUSION: MD-4 is a key training day discriminating between competitive level. HSR and SpD volume and intensity is tapered in WSL and WC players, however there is less clear taper of ACC or DEC. As such, WC teams could increase the volume and intensity of HSR on MD-4 to mimic locomotor activities of those at a higher standard

Rape and respectability: ideas about sexual violence and social class

Women on low incomes are disproportionately represented among sexual violence survivors, yet feminist research on this topic has paid very little attention to social class. This article blends recent research on class, gender and sexuality with what we know about sexual violence. It is argued that there is a need to engage with classed distinctions between women in terms of contexts for and experiences of sexual violence, and to look at interactions between pejorative constructions of working-class sexualities and how complainants and defendants are perceived and treated. The classed division between the sexual and the feminine, drawn via the notion of respectability, is applied to these issues. This piece is intended to catalyse further research and debate, and raises a number of questions for future work on sexual violence and social class

Concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit to measure velocity during team sport activity

The concurrent validity and between-unit reliability of a foot-mounted inertial measurement unit (F-IMU) was investigated during linear and change of direction running drills. Sixteen individuals performed four repetitions of two drills (maximal acceleration and flying 10m sprint) and five repetitions of a multi-directional movement protocol. Participants wore two F-IMUs (Playermaker) and 10 retro-reflective markers to allow for comparisons to the criterion system (Qualisys). Validity of the F-IMU derived velocity was assessed via root-mean-square error (RMSE), 95% limits of agreement (LoA) and mean difference with 95% confidence interval (CI). Between-unit reliability was assessed via intraclass correlation (ICC) with 90% CI and 95% LoA. The mean difference for instantaneous velocity for all participants and drills combined was −0.048 ± 0.581 m ∙ s−1, the LoA were from −1.09 to −1.186 m ∙ s−1 and RMSE was 0.583m ∙ s−1. The ICC ranged from 0.84 to 1, with LoA from −7.412 to 2.924 m ∙ s−1. Differences were dependent on the reference speed, with the greatest absolute difference (−0.66 m ∙ s−1) found at velocities above 7 m ∙ s−1. Between-unit reliability of the F-IMU ranges from good to excellent for all locomotor characteristics. Playermaker has good agreement with 3D motion capture for velocity and good to excellent between-unit reliability

Seismic Coupling of Short-Period Wind Noise Through Mars’ Regolith for NASA’s InSight Lander

NASA’s InSight lander will deploy a tripod-mounted seismometer package onto the surface of Mars in late 2018. Mars is expected to have lower seismic activity than the Earth, so minimisation of environmental seismic noise will be critical for maximising observations of seismicity and scientific return from the mission. Therefore, the seismometers will be protected by a Wind and Thermal Shield (WTS), also mounted on a tripod. Nevertheless, wind impinging on the WTS will cause vibration noise, which will be transmitted to the seismometers through the regolith (soil). Here we use a 1:1-scale model of the seismometer and WTS, combined with field testing at two analogue sites in Iceland, to determine the transfer coefficient between the two tripods and quantify the proportion of WTS vibration noise transmitted through the regolith to the seismometers. The analogue sites had median grain sizes in the range 0.3–1.0 mm, surface densities of 1.3-1.8 gcm−3, and an effective regolith Young’s modulus of 2.5+1.9−1.4 MPa. At a seismic frequency of 5 Hz the measured transfer coefficients had values of 0.02–0.04 for the vertical component and 0.01–0.02 for the horizontal component. These values are 3–6 times lower than predicted by elastic theory and imply that at short periods the regolith displays significant anelastic behaviour. This will result in reduced short-period wind noise and increased signal-to-noise. We predict the noise induced by turbulent aerodynamic lift on the WTS at 5 Hz to be ∼2×10−10 ms−2 Hz−1/2 with a factor of 10 uncertainty. This is at least an order of magnitude lower than the InSight short-period seismometer noise floor of 10−8 ms−2 Hz−1/2

Locomotor and technical characteristics of female soccer players training: exploration of differences between competition standards.

OBJECTIVES: To (i) quantify the differences in locomotor and technical characteristics between different drill categories in female soccer and (ii) explore the training drill distributions between different standards of competition. METHODS: Technical (ball touches, ball releases, high-speed ball releases) and locomotor data (total distance, high-speed running distance [>5.29 m∙s-1]) were collected using foot-mounted inertial measurement units from 458 female soccer players from three Women's Super League (WSL; n = 76 players), eight Women's Championship (WC; n = 217) and eight WSL Academy (WSLA; n = 165) teams over a 28-week period. Data were analysed using general linear mixed effects. RESULTS: Across all standards, the largest proportion of time was spent in technical (TEC) (WSL = 38%, WC = 28%, WSLA = 29%) and small-sided extensive games (SSGe) (WSL = 20%, WC = 31%, WSLA = 30%) drills. WSL completed more TEC and tactical (TAC) training whilst WC and WSLA players completed more SSGe and possession (POS) drills. Technical drills elicited the highest number of touches, releases and the highest total distance and high-speed activity. Position-specific drills elicited the lowest number of touches and releases and the lowest total distance. When the technical and locomotor demand of each drill were made relative to time, there were limited differences between drills, suggesting drill duration was the main moderating factor. CONCLUSION: Findings provide novel understanding of the technical and locomotor demands of different drill categories in female soccer. These results can be used by coaches and practitioners to inform training session design