SSME lifetime prediction and verification, integrating environments, structures, materials: The challenge

The planned missions for the space shuttle dictated a unique and technology-extending rocket engine. The high specific impulse requirements in conjunction with a 55-mission lifetime, plus volume and weight constraints, produced unique structural design, manufacturing, and verification requirements. Operations from Earth to orbit produce severe dynamic environments, which couple with the extreme pressure and thermal environments associated with the high performance, creating large low cycle loads and high alternating stresses above endurance limit which result in high sensitivity to alternating stresses. Combining all of these effects resulted in the requirements for exotic materials, which are more susceptible to manufacturing problems, and the use of an all-welded structure. The challenge of integrating environments, dynamics, structures, and materials into a verified SSME structure is discussed. The verification program and developmental flight results are included. The first six shuttle flights had engine performance as predicted with no failures. The engine system has met the basic design challenges

Considerations on repeated repairing of weldments in Inconel 718 alloy

The effects of repeated weld repairs on the metallurgical characteristics, high cycle fatigue (HCF), and tensile properties of Inconel 718 butt weld joints were determined. A 1/4 in thick plate and a 1/2 in thick plate were used as well as tungsten inert gas welding, and Inconel 718 filler wire. Weld panels were subjected to 2, 6, and 12 repeated repairs and were made in a highly restrained condition. Post weld heat treatments were also conducted with the welded panel in the highly restrained condition. Results indicate that no significant metallurgical anomaly is evident as a result of up to twelve repeated weld repairs. No degradation in fatigue life is noted for up to twelve repeated repairs. Tensile results from specimens which contained up to twelve repeated weld repairs revealed no significant degradation in UTS and YS. However, a significant decrease in elongation is evident with specimens (solution treated and age hardened after welding) which contained twelve repeated repairs. The elongation loss is attributed to the presence of a severe notch on each side (fusion line) of the repair weld bead reinforcement

Milk Products in Bread Making

The topic was the usage of milk in bread making. Initial investigations in bread making using milk were aimed at learning how to prepare milk best suited for bread making and finding the proper quantities for optimum results. The convenience, economy, and uniformity of dry milk solids greatly increased their usage by bakers. These advantages have been further augmented by research and experimentation by the dry milk producers, which have resulted in a product which would appreciably improve bread quality. Milk may be altered both in physical and chemical properties by heating. The article goes on to give more information on milk usage in baking

Arithmetic and Boolean secret sharing MPC on FPGAs in the data center

Multi-Party Computation (MPC) is an important technique used to enable computation over confidential data from several sources. The public cloud provides a unique opportunity to enable MPC in a low latency environment. Field Programmable Gate Array (FPGA) hardware adoption allows for both MPC acceleration and utilization of low latency, high bandwidth communication networks that substantially improve the performance of MPC applications. In this work, we show how designing arithmetic and Boolean Multi-Party Computation gates for FPGAs in a cloud provide improvements to current MPC offerings and ease their use in applications such as machine learning. We focus on the usage of Secret Sharing MPC first designed by Araki et al [1] to design our FPGA MPC while also providing a comparison with those utilizing Garbled Circuits for MPC. We show that Secret Sharing MPC provides a better usage of cloud resources, specifically FPGA acceleration, than Garbled Circuits and is able to use at least a 10 × less computer resources as compared to the original design using CPUs.Accepted manuscrip

Propulsion Systems Panel

Topics addressed are: (1) cryogenic tankage; (2) launch vehicle TPS/insulation; (3) durable passive thermal control devices and/or coatings; (4) development and characterization of processing methods to reduce anisotropy of material properties in Al-Li; (5) durable thermal protection system (TPS); (6) unpressurized Al-Li structures (interstages, thrust structures); (7) near net shape sections; (8) pressurized structures; (9) welding and joining; (10) micrometeoroid and debris hypervelocity shields; (11) state-of-the-art shell buckling structure optimizer program to serve as a rapid design tool; (12) test philosophy; (13) reduced load cycle time; (14) structural analysis methods; (15) optimization of structural criteria; and (16) develop an engineering approach to properly trade material and structural concepts selection, fabrication, facilities, and cost

The cumulative effect of reporting and citation biases on the apparent efficacy of treatments:the case of depression

Evidence-based medicine is the cornerstone of clinical practice, but it is dependent on the quality of evidence upon which it is based. Unfortunately, up to half of all randomized controlled trials (RCTs) have never been published, and trials with statistically significant findings are more likely to be published than those without (Dwan et al., 2013). Importantly, negative trials face additional hurdles beyond study publication bias that can result in the disappearance of non-significant results (Boutron et al., 2010; Dwan et al., 2013; Duyx et al., 2017). Here, we analyze the cumulative impact of biases on apparent efficacy, and discuss possible remedies, using the evidence base for two effective treatments for depression: Antidepressants and psychotherapy

Genetics of callous-unemotional behavior in children

Callous-unemotional behavior (CU) is currently under consideration as a subtyping index for conduct disorder diagnosis. Twin studies routinely estimate the heritability of CU as greater than 50%. It is now possible to estimate genetic influence using DNA alone from samples of unrelated individuals, not relying on the assumptions of the twin method. Here we use this new DNA method (implemented in a software package called Genome-wide Complex Trait Analysis, GCTA) for the first time to estimate genetic influence on CU. We also report the first genome-wide association (GWA) study of CU as a quantitative trait. We compare these DNA results to those from twin analyses using the same measure and the same community sample of 2,930 children rated by their teachers at ages 7, 9 and 12. GCTA estimates of heritability were near zero, even though twin analysis of CU in this sample confirmed the high heritability of CU reported in the literature, and even though GCTA estimates of heritability were substantial for cognitive and anthropological traits in this sample. No significant associations were found in GWA analysis, which, like GCTA, only detects additive effects of common DNA variants. The phrase ‘missing heritability’ was coined to refer to the gap between variance associated with DNA variants identified in GWA studies versus twin study heritability. However, GCTA heritability, not twin study heritability, is the ceiling for GWA studies because both GCTA and GWA are limited to the overall additive effects of common DNA variants, whereas twin studies are not. This GCTA ceiling is very low for CU in our study, despite its high twin study heritability estimate. The gap between GCTA and twin study heritabilities will make it challenging to identify genes responsible for the heritability of CU

Overview of CAPICE—Childhood and Adolescence Psychopathology: unravelling the complex etiology by a large Interdisciplinary Collaboration in Europe—an EU Marie Skłodowska-Curie International Training Network

The Roadmap for Mental Health and Wellbeing Research in Europe (ROAMER) identified child and adolescent mental illness as a priority area for research. CAPICE (Childhood and Adolescence Psychopathology: unravelling the complex etiology by a large Interdisciplinary Collaboration in Europe) is a European Union (EU) funded training network aimed at investigating the causes of individual differences in common childhood and adolescent psychopathology, especially depression, anxiety, and attention deficit hyperactivity disorder. CAPICE brings together eight birth and childhood cohorts as well as other cohorts from the EArly Genetics and Life course Epidemiology (EAGLE) consortium, including twin cohorts, with unique longitudinal data on environmental exposures and mental health problems, and genetic data on participants. Here we describe the objectives, summarize the methodological approaches and initial results, and present the dissemination strategy of the CAPICE network. Besides identifying genetic and epigenetic variants associated with these phenotypes, analyses have been performed to shed light on the role of genetic factors and the interplay with the environment in influencing the persistence of symptoms across the lifespan. Data harmonization and building an advanced data catalogue are also part of the work plan. Findings will be disseminated to non-academic parties, in close collaboration with the Global Alliance of Mental Illness Advocacy Networks-Europe (GAMIAN-Europe)

Ultradian rhythmicity of plasma cortisol is necessary for normal emotional and cognitive responses in man

Glucocorticoids (GCs) are secreted in an ultradian, pulsatile pattern that emerges from delays in the feedforward-feedback interaction between the anterior pituitary and adrenal glands. Dynamic oscillations of GCs are critical for normal cognitive and metabolic function in the rat and have been shown to modulate the pattern of GC-sensitive gene expression, modify synaptic activity, and maintain stress responsiveness. In man, current cortisol replacement therapy does not reproduce physiological hormone pulses and is associated with psychopathological symptoms, especially apathy and attenuated motivation in engaging with daily activities. In this work, we tested the hypothesis that the pattern of GC dynamics in the brain is of crucial importance for regulating cognitive and behavioral processes. We provide evidence that exactly the same dose of cortisol administered in different patterns alters the neural processing underlying the response to emotional stimulation, the accuracy in recognition and attentional bias toward/away from emotional faces, the quality of sleep, and the working memory performance of healthy male volunteers. These data indicate that the pattern of the GC rhythm differentially impacts human cognition and behavior under physiological, nonstressful conditions and has major implications for the improvement of cortisol replacement therapy