Aviation's role in earth resources surveys

The role of satellites designed to make a wide variety of earth observations is discussed along with the renewed interest in the use of aircraft as platforms for similar and complementary earth resources surveys. Surveys covering the areas of forestry, agriculture, hydrology, oceanography, geology, and geography are included. Aerials surveys equipped for nonphotographic remote sensing and aircraft flights synchronized with satellite observations to provide correlated data are discussed. Photographs are shown to illustrate preliminary results from several of the test sites

Ultrasonic wave propagation in heterogenous media

The non-destructive testing of austenitic steel welds using ultrasound is of vital importance for assessing safety critical structures such as those found in the nuclear industry. The internal geometry of these welds is heterogeneous and highly scattering and this makes it dicult to detect and characterise any defects within them. To help overcome these diculties the use of ultrasound transducer arrays and the associated Full Matrix Capture is becoming more widespread. There is a need therefore to develop post-processing algorithms that best utilise the data from such devices. This paper considers the use of a time-frequency domain method known as the Decomposition of the Time Reversal Operator (DORT) method. To develop this method and to demonstrate its ecacy in tackling this problem a series of simulated data sets are used. The simulated data is generated using a finite element method (PZFLEX) with the heterogeneous internal microstructure of the weld being given by previous Electron Backscatter Diraction measurements. A range of artificial flaws are then inserted into this geometry. By varying the flaw size and type a comparison is conducted between the DORT method and the Total Focusing Method (TFM) and their relative ability to perform flaw detection assessed. Importantly, however, the DORT method relies on a Singular Value Decomposition in time and frequency space and this spectral information contains information about the flaw size and shape

An inverse problem of reconstructing the electrical and geometrical parameters characterising airframe structures and connector interfaces

This article is concerned with the detection of environmental ageing in adhesively bonded structures used in the aircraft industry. Using a transmission line approach a forward model for the reflection coefficients is constructed and is shown to have an analytic solution in the case of constant permeability and permittivity. The inverse problem is analysed to determine necessary conditions for a unique recovery. The main thrust of this article then involves modelling the connector and then experimental rigs are built for the case of the air-filled line to enable the connector parameters to be identified and the inverse solver to be tested. Some results are also displayed for the dielectric-filled line

Laser observations of the moon: Normal points for 1973

McDonald Observatory lunar laser ranging observations for 1973 are presented in the form of compressed normal points and amendments for the 1969-1972 data set are given. Observations of the reflector mounted on the Soviet roving vehicle Lunakhod 2 have also been included

Study of airborne science experiment management concepts for application to space shuttle. Volume 1: Executive summary

The management concepts and operating procedures are documented as they apply to the planning of shuttle spacelab operations. Areas discussed include: airborne missions; formulation of missions; management procedures; experimenter involvement; experiment development and performance; data handling; safety procedures; and applications to shuttle spacelab planning. Characteristics of the airborne science experience are listed, and references and figures are included

Study of airborne science experiment management concepts for application to space shuttle. Volume 3: Appendixes

Detailed information is presented concerning specific airborne missions in support of the ASSESS program. These missions are the AIDJEX expeditions, meteor shower expeditions, CAT and atmospheric sampling missions, ocean color expeditions, and the Lear Jet missions. For Vol. 2, see N73-31729

Narratives of spatial division: the role of social memory in shaping urban space in Belfast

The paper examines the role of shared spaces in divided cities in promoting future sustainable communities and spaces described as inclusive to all. It addresses the current challenges that prevent such inclusiveness and suggests future trends of its development to be of benefit to the wider city community. It explains how spaces in divided cities are carved up into perceived ownerships and territorialized areas, which increases tension on the shared space between territories; the control of which can often lead to inter-community disputes. The paper reports that common shared space in-between conflicting communities takes on increased importance since the nature of the conflict places emphasis on communities’ confidence, politically and socially, while also highlighting the necessity for confidence in inclusion and feeling secure in the public domain. In order to achieve sustainable environments, strategies to promote shared spaces require further focus on the significance of everyday dynamics as essential aspects for future integration and conflict resolution

Long-term microparticle flux variability indicated by comparison of Interplanetary Dust Experiment (IDE) timed impacts for LDEF's first year in orbit with impact data for the entire 5.77-year orbital lifetime

The electronic sensors of the Interplanetary Dust Experiment (IDE) recorded precise impact times and approximate directions for submicron to approximately 100 micron size particles on all six primary sides of the spacecraft for the first 346 days of the LDEF orbital mission. Previously-reported analyses of the timed impact data have established their spatio-temporal features, including the demonstration that a preponderance of the particles in this regime are orbital debris and that a large fraction of the debris particles are encountered in megameter-size clouds. Short-term fluxes within such clouds can rise several orders of magnitude above the long-term average. These unexpectedly large short-term variations in debris flux raise the question of how representative an indication of the multi-year average flux is given by the nearly one year of timed data. One of the goals of the IDE was to conduct an optical survey of impact sites on detectors that remained active during the entire LDEF mission, to obtain full-mission fluxes. We present here the comparisons and contrasts among the new IDE optical survey impact data, the IDE first-year timed impact data, and impact data from other LDEF micrometeoroid and debris experiments. The following observations are reported: (1) the 5.77 year long-term integrated microparticle impact fluxes recorded by IDE detectors matched the integrated impact fluxes measured by other LDEF investigators for the same period; (2) IDE integrated microparticle impact fluxes varied by factors from 0.5 to 8.3 for LDEF days 1-346, 347-2106 and 1-2106 (5.77 years) on rows 3 (trailing edge, or West), 6 (South side), 12 (North side), and the Earth and Space ends; and (3) IDE integrated microparticle impact fluxes varied less than 3 percent for LDEF days 1-346, 347-2106 and 1-2106 (5.77 years) on row 9 (leading edge, or East). These results give further evidence of the accuracy and internal consistency of the recorded IDE impact data. This leads to the further conclusion that the utility of long-term ratios for impacts on various sides of a stabilized satellite in low Earth orbit (LEO) is extremely limited. These observations and their consequences highlight the need for continuous, real time monitoring of the dynamic microparticle environment in LEO

Beyond good intentions: lessons on equipment donation from an African hospital.

OBJECTIVE: In 2000, a referral hospital in the Gambia accepted a donation of oxygen concentrators to help maintain oxygen supplies. The concentrators broke down and were put into storage. A case study was done to find the reasons for the problem and to draw lessons to help improve both oxygen supplies and the success of future equipment donations. METHODS: A technical assessment of the concentrators was carried out by a biomedical engineer with relevant expertise. Semi-structured interviews were undertaken with key informants, and content analysis and inductive approaches were applied to construct the history of the episode and the reasons for the failure. FINDINGS: Interviews confirmed the importance of technical problems with the equipment. They also revealed that the donation process was flawed, and that the hospital did not have the expertise to assess or maintain the equipment. Technical assessment showed that all units had the wrong voltage and frequency, leading to overheating and breakdown. Subsequently a hospital donations committee was established to oversee the donations process. On-site biomedical engineering expertise was arranged with a nongovernmental organization (NGO) partner. CONCLUSION: Appropriate donations of medical equipment, including oxygen concentrators, can be of benefit to hospitals in resource-poor settings, but recipients and donors need to actively manage donations to ensure that the donations are beneficial. Success requires planning, technical expertise and local participation. Partners with relevant skills and resources may also be needed. In 2002, WHO produced guidelines for medical equipment donations, which address problems that might be encountered. These guidelines should be publicized and used