Cooling and heating by adiabatic magnetization in the Ni50_{50}Mn34_{34}In16_{16} magnetic shape memory alloy

We report on measurements of the adiabatic temperature change in the inverse magnetocaloric Ni$_{50}$Mn$_{34}$In$_{16}$ alloy. It is shown that this alloy heats up with the application of a magnetic field around the Curie point due to the conventional magnetocaloric effect. In contrast, the inverse magnetocaloric effect associated with the martensitic transition results in the unusual decrease of temperature by adiabatic magnetization. We also provide magnetization and specific heat data which enable to compare the measured temperature changes to the values indirectly computed from thermodynamic relationships. Good agreement is obtained for the conventional effect at the second-order paramagnetic-ferromagnetic phase transition. However, at the first order structural transition the measured values at high fields are lower than the computed ones. Irreversible thermodynamics arguments are given to show that such a discrepancy is due to the irreversibility of the first-order martensitic transition.Comment: 5 pages, 4 figures. Accepted for publication in the Physical Review

Lattice dynamics and phonon softening in Ni-Mn-Al Heusler alloys

Inelastic and elastic neutron scattering have been used to study a single crystal of the Ni$_{54}$Mn$_{23}$Al$_{23}$ Heusler alloy over a broad temperature range. The paper reports the first experimental determination of the low-lying phonon dispersion curves for this alloy system. We find that the frequencies of the TA$_2$ modes are relatively low. This branch exhibits an anomaly (dip) at a wave number $\xi_{0} ={1/3}\approx 0.33$, which softens with decreasing temperature. Associated with this anomalous dip at $\xi_{0}$, an elastic central peak scattering is also present. We have also observed satellites due to the magnetic ordering.Comment: 6 pages, 6 figures. Accepted for publication in the Physical Review

Temperature and magnetic field dependences of the elastic constants of Ni-Mn-Al magnetic Heusler alloys

We report on measurements of the adiabatic second order elastic constants of the off-stoichiometric Ni$_{54}$Mn$_{23}$Al$_{23}$ single crystalline Heusler alloy. The variation in the temperature dependence of the elastic constants has been investigated across the magnetic transition and over a broad temperature range. Anomalies in the temperature behaviour of the elastic constants have been found in the vicinity of the magnetic phase transition. Measurements under applied magnetic field, both isothermal and variable temperature, show that the value of the elastic constants depends on magnetic order, thus giving evidence for magnetoelastic coupling in this alloy system.Comment: 7 pages, 5 figures. Accepted for publication in Physical the Review

Probing the variability in oxidation states of magnetite nanoparticles by single-particle spectroscopy

We have studied the electronic and chemical properties of a variety of ensembles of size-and shape-selected Fe3O4 nanoparticles with single-particle sensitivity by means of synchrotron-based X-ray photoemission electron microscopy. The local X-ray absorption spectra reveal that the oxidation states and the amount and type of cations within the individual nanoparticles can show a striking local variability even when the average structural and magnetic parameters of the monodisperse ensembles appear to be compatible with those of conventional homogeneous magnetite nanoparticles. Our results show the key role played by oleic acid concentration in the reaction mixture on the formation and compositional homogeneity within individual nanoparticles. When the concentration of oleic acid is high enough, the nanoparticles are composed of a Fe3O4 core surrounded by a thin gamma-Fe2O3 shell. However, at a low concentration of the fatty acid, the Fe3O4 nanoparticles are likely inhomogeneous with small inclusions of FeO and Fe phases, as a result of an uncontrolled reduction of Fe3+ cations. All the foregoing underlines the importance of combining both advanced synthesis techniques and complementary single-particle investigations performed on a statistically significant number of particles so as to improve the understanding and control over electronic and magnetic phenomena at the nanoscale

Quantum cascade laser-based reflectance spectroscopy: a robust approach for the classification of plastic type

© The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Michel, A. P. M., Morrison, A. E., Colson, B. C., Pardis, W. A., Moya, X. A., Harb, C. C., & White, H. K. Quantum cascade laser-based reflectance spectroscopy: a robust approach for the classification of plastic type. Optics Express, 28(12), (2020): 17741-17756, doi:10.1364/OE.393231.The identification of plastic type is important for environmental applications ranging from recycling to understanding the fate of plastics in marine, atmospheric, and terrestrial environments. Infrared reflectance spectroscopy is a powerful approach for plastics identification, requiring only optical access to a sample. The use of visible and near-infrared wavelengths for plastics identification are limiting as dark colored plastics absorb at these wavelengths, producing no reflectance spectra. The use of mid-infrared wavelengths instead enables dark plastics to be identified. Here we demonstrate the capability to utilize a pulsed, widely-tunable (5.59 - 7.41 µm) mid-infrared quantum cascade laser, as the source for reflectance spectroscopy, for the rapid and robust identification of plastics. Through the application of linear discriminant analysis to the resulting spectral data set, we demonstrate that we can correctly classify five plastic types: polyethylene terephthalate (PET), high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS), with a 97% accuracy rate.Richard Saltonstall Charitable Foundation; National Academies Keck Futures Initiative (NAKFI DBS13)

Understanding variations of thermal hysteresis in barocaloric plastic crystal neopentyl glycol using correlative microscopy and calorimetry

Plastic crystals (PCs) exhibit solid–solid order-disorder first-order phase transitions that are accompanied by large correlated thermal and volume changes. These characteristics make PCs promising barocaloric solid-state working bodies for heating and cooling applications. However, understanding the variation of transition temperatures and thermal hysteresis in PCs with cycling is critical if these materials are to replace traditional gaseous refrigerants. Here, for the archetypal barocaloric PC neopentyl glycol (NPG), we correlate microstructure obtained from scanning electron microscopy with local and total thermal changes at the phase transition from infra-red imaging and calorimetry, respectively. We outline an evolution in microstructure as NPG recrystallises during repeated thermal cycling through its solid–solid phase transition. The observed microstructural changes are correlated with spatially inhomogeneous heat transfer, yielding direct insight into the kinetics of the phase transition. Our results suggest that the interplay of these processes affects the undesirable thermal hysteresis and the nature of the kinetic steady-state microstructures that are stabilised during cycling between the ordered and disordered phases. These observations have implications for using NPG and other PCs as technologically relevant barocaloric materials and suggest ways in which the hysteresis in these types of materials may be modified

Relating the outcome of HCV infection and different host SNP polymorphisms in a Majorcan population coinfected with HCV–HIV and treated with pegIFN-RBV

Hepatitis C virus (HCV) is one of the major causes of chronic hepatitis, cirrhosis, and hepatocellular carcinoma, and the development of HCV-related disease is accelerated in individuals coinfected with human immunodeficiency-1 virus (HIV). In the present study, we correlated different host single-nucleotide polymorphisms (SNPs) in the IL28B, CTLA4, LDLr, and HFE genes and mitochondrial DNA (mtDNA) haplogroups with the outcome of HCV infection and the response to pegylated-interferon plus ribavirin (pegIFN-RBV) treatment. Our study population consisted of 63 Majorcan patients coinfected with HCV and HIV and 59 anonymous unrelated controls. Whereas the population frequency of IL28B alleles was similar to that found in a North-American cohort of European descent, the frequency of the rs12979860 C allele was lower than that determined in other cohorts from Spain. The frequencies of CTLA4 and LDLr polymorphisms were comparable to those reported in other populations. Significant differences between cases and control cohorts occurred only for the H63D mutation of the HFE gene. There were no other differences in the frequencies of other polymorphisms or mtDNA haplogroups. The IL28B rs12979860 CC genotype was shown to be associated with a rapid virological response, and the spontaneous viral clearance rate for HCV was higher in patients with the CTLA4+49 G allele. There was no relationship between SNPs in the LDLr and HFE genes and mtDNA haplogroups and the response to treatment. Our results suggest that the host genetic background plays a significant role in the pegIFN-RBV response of patients coinfected with HCV and HIV. [Int Microbiol 2014; 17(1):11-20]Keywords: HCV–HIV co-infection · mtDNA haplogroups · SNP polymorphism

Near-Room-Temperature Reversible Giant Barocaloric Effects in [(CH₃)₄N]Mn[N₃]₃ Hybrid Perovskite

[Abstract] We report giant reversible barocaloric effects in [(CH₃)₄N]Mn[N₃]₃ hybrid organic–inorganic perovskite, near its first-order cubic-monoclinic structural phase transition at ₀ ∼ 305 K. When driving the transition thermally at atmospheric pressure, the transition displays a large change in entropy of ∼80 J K⁻¹ kg⁻¹ and a small thermal hysteresis of ∼7 K, as well as a large change in volume of ∼1.5%. When driving the transition with pressure near room temperature, the transition displays large changes in entropy of ∼70 J K⁻¹ kg⁻¹, which represent a giant barocaloric response. Hybrid perovskites with similar barocaloric response and lower operating temperatures may find applications in environmentally friendly cooling.The authors are grateful for financial support from Ministerio de Economía y Competitividad MINECO and EU-FEDER (MAT2017-86453-R), Xunta de Galicia (ED431G/09), FAMEPA (COOPI-07771/17), and ERC Starting Grant no. 680032Xunta de Galicia; ED431G/0

A ferroelectric memristor

Memristors are continuously tunable resistors that emulate synapses. Conceptualized in the 1970s, they traditionally operate by voltage-induced displacements of matter, but the mechanism remains controversial. Purely electronic memristors have recently emerged based on well-established physical phenomena with albeit modest resistance changes. Here we demonstrate that voltage-controlled domain configurations in ferroelectric tunnel barriers yield memristive behaviour with resistance variations exceeding two orders of magnitude and a 10 ns operation speed. Using models of ferroelectric-domain nucleation and growth we explain the quasi-continuous resistance variations and derive a simple analytical expression for the memristive effect. Our results suggest new opportunities for ferroelectrics as the hardware basis of future neuromorphic computational architectures