CO mapping of the Orion molecular cloud: The influence of star formation on cloud structure

Regions of massive star formation have long been believed to have a profound influence on the structure of their surrounding molecular clouds. The ways in which massive star formation has altered the structure and kinematics of the Orion Molecular Cloud are discussed. The data to be discussed consists of a large scale map of the CO J=1-0 emission from approximately 3 square degrees of OMC-1. During 1985, the Five College Radio Astronomy Observatory 14M antenna was used to map a 2 deg x 1 deg region centered on alpha(1950) = 5(h)33(m)00(s) delta(1950) = -5 deg 30 min. The region mapped in 1985 covers the well known HII regions M42, M43, and NGC1977, and the CO map contains abundant evidence of the interaction between these regions and the molecular cloud. Indeed, the global structure of the cloud appears to have been strongly influenced by the continuous formation of massive stars within the cloud. Individual instances of some of these features are discussed. There appear to be two classes of features which are indicative of this interaction: CO bright rims and CO holes. During 1986, we have undertaken further mapping of OMC-1 to the south of the region covered by the 1985 map. This portion of the cloud contains significant regions of star formation, but O star formation has not occured and large HII regions have not developed to alter the appearance of the cloud. A detailed map of this region is thus an opportunity to view the structure of the molecular cloud before it has been altered by massive star formation. Preliminary analysis of data obtained in this region suggests that the structure and kinematics of the southern portion of the Orion cloud are indeed dramatically different from those of the region previously mapped. Comparison of the two regions thus supports models of the development of structure in molecular clouds through interaction with the HII regions formed within them

A wider audience: Turning VLBI into a survey instrument

Radio observations using the Very Long Baseline Interferometry (VLBI) technique typically have fields of view of only a few arcseconds, due to the computational problems inherent in imaging larger fields. Furthermore, sensitivity limitations restrict observations to very compact and bright objects, which are few and far between on the sky. Thus, while most branches of observational astronomy can carry out sensitive, wide-field surveys, VLBI observations are limited to targeted observations of carefully selected objects. However, recent advances in technology have made it possible to carry out the computations required to target hundreds of sources simultaneously. Furthermore, sensitivity upgrades have dramatically increased the number of objects accessible to VLBI observations. The combination of these two developments have enhanced the survey capabilities of VLBI observations such that it is now possible to observe (almost) any point in the sky with milli-arcsecond resolution. In this talk I review the development of wide-field VLBI, which has made significant progress over the last three years.Comment: Invited review at the General Assembly of the Astronomische Gesellschaf

Preliminary calibration of a generic scramjet combustor

The results of a preliminary investigation of the combustion of hydrogen fuel at hypersonic flow conditions are provided. The tests were performed in a generic, constant-area combustor model with test gas supplied by a free-piston-driven reflected-shock tunnel. Static pressure measurements along the combustor wall indicated that burning did occur for combustor inlet conditions of P(static) approximately equal to 19kPa, T(static) approximately equal to 1080 K, and U approximately equal to 3630 m/s with a fuel equivalence ratio approximately equal to 0.9. These inlet conditions were obtained by operating the tunnel with stagnation enthalpy approximately equal to 8.1 MJ/kg, stagnation pressure approximately equal to 52 MPa, and a contoured nozzle with a nominal exit Mach number of 5.5

Shock tunnel studies of scramjet phenomena, supplement 5

A series of reports are presented on SCRAMjet studies, shock tunnel studies, and expansion tube studies. The SCRAMjet studies include: (1) Investigation of a Supersonic Combustion Layer; (2) Wall Injected SCRAMjet Experiments; (3) Supersonic Combustion with Transvers, Circular, Wall Jets; (4) Dissociated Test Gas Effects on SCRAMjet Combustors; (5) Use of Silane as a Fuel Additive for Hypersonic Thrust Production, (6) Pressure-length Correlations in Supersonic Combustion; (7) Hot Hydrogen Injection Technique for Shock Tunnels; (8) Heat Release - Wave Interaction Phenomena in Hypersonic Flows; (9) A Study of the Wave Drag in Hypersonic SCRAMjets; (10) Parametric Study of Thrust Production in the Two Dimensional SCRAMjet; (11) The Design of a Mass Spectrometer for use in Hypersonic Impulse Facilities; and (12) Development of a Skin Friction Gauge for use in an Impulse Facility. The shock tunnel studies include: (1) Hypervelocity flow in Axisymmetric Nozzles; (2) Shock Tunnel Development; and (3) Real Gas Efects in Hypervelocity Flows over an Inclined Cone. The expansion tube studies include: (1) Investigation of Flow Characteristics in TQ Expansion Tube; and (2) Disturbances in the Driver Gas of a Shock Tube

Shock tunnel studies of scramjet phenomena

Commissioning of the new T4 shock tunnel at the University of Queensland implied that it was no longer necessary to focus the work of the research group about an annual test series conducted in the T3 shock tunnel in Canberra. Therefore, it has been possible to organize a group for work to proceed along lines such that particular personnel are associated with particular project areas. The format of this report consists of a series of reports on specific project areas, with a brief general introduction commenting on each report. The introduction is structured by project areas, with the title of the relevant report stated under the project area heading. The reports themselves follow in the order of the project area headings

Faint Infrared Flares from the Microquasar GRS 1915+105

We present simultaneous infrared and X-ray observations of the Galactic microquasar GRS 1915+105 using the Palomar 5-m telescope and Rossi X-ray Timing Explorer on July 10, 1998 UT. Over the course of 5 hours, we observed 6 faint infrared (IR) flares with peak amplitudes of $\sim 0.3-0.6$ mJy and durations of $\sim 500-600$ seconds. These flares are associated with X-ray soft-dip/soft-flare cycles, as opposed to the brighter IR flares associated with X-ray hard-dip/soft-flare cycles seen in August 1997 by Eikenberry et al. (1998). Interestingly, the IR flares begin {\it before} the X-ray oscillations, implying an ``outside-in'' origin of the IR/X-ray cycle. We also show that the quasi-steady IR excess in August 1997 is due to the pile-up of similar faint flares. We discuss the implications of this flaring behavior for understanding jet formation in microquasars.Comment: 10 pages, 4 figures Accepted for publication in ApJ Letter

Analysis of RR Lyrae Stars in the Northern Sky Variability Survey

We use data from the Northern Sky Variability Survey (NSVS), obtained from the first generation Robotic Optical Transient Search Experiment (ROTSE-I), to identify and study RR Lyrae variable stars in the solar neighborhood. We initially identified 1197 RRab (RR0) candidate stars brighter than the ROTSE median magnitude V = 14. Periods, amplitudes, and mean V magnitudes are determined for a subset of 1188 RRab stars with well defined light curves. Metallicities are determined for 589 stars by the Fourier parameter method and by the relationship between period, amplitude, and [Fe/H]. We comment upon the difficulties of clearly classifying RRc (RR1) variables in the NSVS dataset. Distances to the RRab stars are calculated using an adopted luminosity-metallicity relation with corrections for interstellar extinction. The 589 RRab stars in our final sample are used to study the properties of the RRab population within 5 kpc of the Sun. The Bailey diagram of period versus amplitude shows that the largest component of this sample belongs to Oosterhoff type I. Metal-rich ([Fe/H] > -1) RRab stars appear to be associated with the Galactic disk. Our metal-rich RRab sample may include a thin disk as well as a thick disk population, although the uncertainties are too large to establish this. There is some evidence among the metal-rich RRab stars for a decline in scale height with increasing [Fe/H], as was found by Layden (1995). The distribution of RRab stars with -1 < [Fe/H] < -1.25 indicates that within this metallicity range the RRab stars are a mixture of stars belonging to halo and disk populations.Comment: 68 pages, 26 figures, 9 tables, accepted to A

Validation of the recording of idiopathic pulmonary fibrosis in routinely collected electronic healthcare records in England

Background Routinely-collected healthcare data provide a valuable resource for epidemiological research. Validation studies have shown that for most conditions, simple lists of clinical codes can reliably be used for case finding in primary care, however, studies exploring the robustness of this approach are lacking for diseases such as idiopathic pulmonary fibrosis (IPF) which are largely managed in secondary care. Method Using the UK’s Clinical Practice Research Datalink (CPRD) Aurum dataset, which comprises patient-level primary care records linked to national hospital admissions and cause-of-death data, we compared the positive predictive value (PPV) of eight diagnostic algorithms. Algorithms were developed based on the literature and IPF diagnostic guidelines using combinations of clinical codes in primary and secondary care (SNOMED-CT or ICD-10) with/without additional information. The positive predictive value (PPV) was estimated for each algorithm using the death record as the gold standard. Utilization of the reviewed codes across the study period was observed to evaluate any change in coding practices over time. Result A total of 17,559 individuals had a least one record indicative of IPF in one or more of our three linked datasets between 2008 and 2018. The PPV of case-finding algorithms based on clinical codes alone ranged from 64.4% (95%CI:63.3–65.3) for a “broad” codeset to 74.9% (95%CI:72.8–76.9) for a “narrow” codeset comprising highly-specific codes. Adding confirmatory evidence, such as a CT scan, increased the PPV of our narrow code-based algorithm to 79.2% (95%CI:76.4–81.8) but reduced the sensitivity to under 10%. Adding evidence of hospitalisation to the standalone code-based algorithms also improved PPV, (PPV = 78.4 vs. 64.4%; sensitivity = 53.5% vs. 38.1%). IPF coding practices changed over time, with the increased use of specific IPF codes. Conclusion High diagnostic validity was achieved by using a restricted set of IPF codes. While adding confirmatory evidence increased diagnostic accuracy, the benefits of this approach need to be weighed against the inevitable loss of sample size and convenience. We would recommend use of an algorithm based on a broader IPF code set coupled with evidence of hospitalisation