Direct measurement of divertor exhaust neo enrichment in DIII-D

We report first direct measurements of divertor exhaust gas impurity enrichment, {eta}{sub exh}=(exhaust impurity concentration){divided_by}(core impurity concentration), for both unpumped and D{sub 2} puff-with-divertor-pump conditions. The experiment was performed with neutral beam heated, ELMing H-mode, single-null diverted deuterium plasmas with matched core and exhaust parameters in the DIII-D tokamak. Neon gas impurity was puffed into the divertor. Neon density was measured in the exhaust by a specially modified Penning gauge and in the core by absolute charge exchange recombination spectroscopy. Neon particle accounting indicates that much of the puffed neon entered a temporary unmeasured reservoir, inferred to be the graphite divertor target, which makes direct measurements necessary to calculate divertor enrichments. D{sub 2} puff into the SOL (scrape-off layer) with pumping increased {eta}{sub exh} threefold over either unpumped conditions or D{sub 2} puff directly into the divertor with pumping. These results show that SOL flow plays an important role in divertor exhaust impurity enrichment

Integrated predictive modelling of JET H-mode plasma with type-I ELMs

It is well known that edge plasma parameters influence performance in many different ways (profile stiffness is probably one of the best known examples). In ELMy H-mode a thin region with improved transport characteristics (Edge Transport Barrier) c

Integrated scenario with type-III ELMy H-mode edge: extrapolation to ITER

One of the most severe problems for fusion reactors is the power load on the plasma facing components. The challenge is to develop operation scenarios, which combine sufficient energy confinement with benign heat loads to the plasma facing components. The radiative type-III ELMy H-mode seems a possible solution for such an integrated ITER scenario. Nitrogen seeded type-III ELMy H-modes for the standard inductive scenario and the high beta stationary hybrid scenario are investigated with respect to their transient and steady-state power fluxes to the divertor, confinement properties, edge operational space, core operational space, plasma purity andMHDbehaviour. A large database of highly radiative type-III ELMy H-modes on JET is used for extrapolations to ITER. On this basis the transient heat load should be acceptable for ITER. It was found that the scaling of the confinement time with respect to the ion gyroradius is close to the gyro-Bohm scaling. Scalings with respect to the plasma collisionality suggest that the confinement will be good enough for an ITER scenario at 17MA with a power amplification factor (Q) of 10 and might be marginally good enough for aQ = 10 scenario at 15 MA. Those extrapolations are supported by simulations with an integrated core/edge model COREDIV. In addition the hybrid scenario with type-III edge localized modes has been proven to have improved edge conditions without any modification of the central plasma current profile, indicating it is compatible with a high beta operation for a steady-state ITER Q = 5 scenario