Ús d’ATENEA en l’adaptació a l’EEES de les assignatures experimentals troncals de la titulació d’Enginyeria Tècnica Industrial en Química Industrial de la EUETIT

ATENEA ha estat una eina bàsica en la coordinació de les assignatures experimentals dins de la seva adaptació al EEES. En aquesta línia s’han utilitzat diverses eines que ens proporciona la plataforma digital. Aquesta ha estat el punt de distribució de la documentació necessària per a cada una de les assignatures i de coordinació de les diferents tasques a fer durant el curs. Dins d’aquestes tasques hi ha, entre d’altres, l’ús dels qüestionaris tant per a avaluar a l’alumnat com per a avaluar l’assignatura i el professorat, l’ús de les bases de dades i dels forums per comunicar i trametre dades, informacions, ...Peer Reviewe

Focus ion beam/scanning electron microscopy characterization of osteoclastic resorption of calcium phosphate substrates

This article presents the application of dual focused ion beam/scanning electron microscopy (FIB-SEM) imaging for preclinical testing of calcium phosphates with osteoclast precursor cells and how this high-resolution imaging technique is able to reveal microstructural changes at a level of detail previously not possible. Calcium phosphate substrates, having similar compositions but different microstructures, were produced using low- and high-temperature processes (biomimetic calcium-deficient hydroxyapatite [CDHA] and stoichiometric sintered hydroxyapatite, respectively). Human osteoclast precursor cells were cultured for 21 days before evaluating their resorptive potential on varying microstructural features. Alternative to classical morphological evaluation of osteoclasts (OC), FIB-SEM was used to observe the subjacent microstructure by transversally sectioning cells and observing both the cells and the substrates. Resorption pits, indicating OC activity, were visible on the smoother surface of high-temperature sintered hydroxyapatite. FIB-SEM analysis revealed signs of acidic degradation on the grain surface under the cells, as well as intergranular dissolution. No resorption pits were evident on the surface of the rough CDHA substrates. However, whereas no degradation was detected by FIB sections in the material underlying some of the cells, early stages of OC-mediated acidic degradation were observed under cells with more spread morphology. Collectively, these results highlight the potential of FIB to evaluate the resorptive activity of OC, even in rough, irregular, or coarse surfaces where degradation pits are otherwise difficult to visualize.Peer ReviewedPostprint (author's final draft

Osteoclast differentiation from human blood precursors on biomimetic calcium-phosphate substrates

The design of synthetic bone grafts to foster bone formation is a challenge in regenerative medicine. Understanding the interaction of bone substitutes with osteoclasts is essential, since osteoclasts not only drive a timely resorption of the biomaterial, but also trigger osteoblast activity. In this study, the adhesion and differentiation of human blood-derived osteoclast precursors (OCP) on two different micro-nanostructured biomimetic hydroxyapatite materials consisting in coarse (HA-C) and fine HA (HA-F) crystals, in comparison with sintered stoichiometric HA (sin-HA, reference material), were investigated. Osteoclasts were induced to differentiate by RANKL-containing supernatant using cell/substrate direct and indirect contact systems, and calcium (Ca++) and phosphorus (P5+) in culture medium were measured. We observed that OCP adhered to the experimental surfaces, and that osteoclast-like cells formed at a rate influenced by the micro- and nano-structure of HA, which also modulate extracellular Ca++. Qualitative differences were found between OCP on biomimetic HA-C and HA-F and their counterparts on plastic and sin-HA. On HA-C and HA-F cells shared typical features of mature osteoclasts, i.e. podosomes, multinuclearity, tartrate acid phosphatase (TRAP)-positive staining, and TRAP5b-enzyme release. However, cells were less in number compared to those on plastic or on sin-HA, and they did not express some specific osteoclast markers. In conclusion, blood-derived OCP are able to attach to biomimetic and sintered HA substrates, but their subsequent fusion and resorptive activity are hampered by surface micro-nano-structure. Indirect cultures suggest that fusion of OCP is sensitive to topography and to extracellular calcium.Preprin

A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

Calcium phosphate cements (CPCs) are extensively used as synthetic bone grafts, but their poor toughness limits their use to non-load-bearing applications. Reinforcement through introduction of fibers and yarns has been evaluated in various studies but always resulted in a decrease in elastic modulus or bending strength when compared to the CPC matrix. The aim of the present work was to improve the interfacial adhesion between fibers and matrix to obtain tougher biocompatible fiber-reinforced calcium phosphate cements (FRCPCs). This was done by adding a polymer solution to the matrix, with chemical affinity to the reinforcing chitosan fibers, namely trimethyl chitosan (TMC). The improved wettability and chemical affinity of the chitosan fibers with the TMC in the liquid phase led to an enhancement of the interfacial adhesion. This resulted in an increase of the work of fracture (several hundred-fold increase), while the elastic modulus and bending strength were maintained similar to the materials without additives. Additionally the TMC-modified CPCs showed suitable biocompatibility with an osteoblastic cell line.Preprin

Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs

Calcium phosphate cements (CPCs) are attractive synthetic bone grafts as they possess osteoconductive and osteoinductive properties. Their biomimetic synthesis grants them an intrinsic nano- and microporosity that resembles natural bone and is paramount for biological processes such as protein adhesion, which can later enhance cell adhesion. However, a main limitation of CPCs is the lack of macroporosity, which is crucial to allow cell colonization throughout the scaffold. Moreover, CPCs lack specific motifs to guide cell interactions through their membrane proteins. In this study, we explore a strategy targeting simultaneously both macroporosity and cell binding motifs within CPCs by the use of recombinant silk. A silk protein functionalized with the cell binding motif RGD serves as foaming template of CPCs to achieve biomimetic hydroxyapatite (HA) scaffolds with multiscale porosity. The synergies of RGD-motifs in the silk macroporous template and the biomimetic features of HA are explored for their potential to enhance mesenchymal stem cell adhesion, proliferation, migration and differentiation. Macroporous Silk-HA scaffolds improve initial cell adhesion compared to a macroporous HA in the absence of silk, and importantly, the presence of silk greatly enhances cell migration into the scaffold. Additionally, cell proliferation and osteogenic differentiation are achieved in the scaffolds.Peer ReviewedPostprint (published version

Influence of Si substitution on the reactivity of a-tricalcium phosphate

Silicon substituted calcium phosphates have been widely studied over the last ten years due to their enhanced osteogenic properties. Notwithstanding, the role of silicon on a-TCP reactivity is not clear yet. Therefore, the aim of this work was to evaluate the reactivity and the properties of Si-a-TCP in comparison to a-TCP. Precursor powders have similar properties regarding purity, particle size distribution and specific surface area, which allowed a better comparison of the Si effects on their reactivity and cements properties. Both Si-a-TCP and a-TCP hydrolyzed to a calcium-deficient hydroxyapatite when mixed with water but their conversion rates were different. Si-a-TCP exhibited a slower setting rate than a-TCP, i.e. kSSA for Si-TCP (0.021 g·m- 2·h- 1) was almost four times lower than for a-TCP (0.072 g·m- 2·h- 1). On the other hand, the compressive strength of the CPC resulting from fully reacted Si-a-TCP was significantly higher (12.80 ± 0.38 MPa) than that of a-TCP (11.44 ± 0.54 MPa), due to the smaller size of the entangled precipitated apatite crystals.Preprin

Effect of chemical treatments and additives on properties of chicken feathers thermoplastic biocomposites

The valorization of chicken feathers (CFs) waste was researched in this work through the preparation of composites using ground chicken feathers as a filler (20 % v/v) and polypropylene (PP) or low-density polyethylene (LDPE) matrices. In order to improve the compatibility between CFs and the matrixes two different strategies were followed. First, by the chemical modification of the CFs by either acetylation or silanization and, second, by the addition of adhesion promoters like maleated polypropylene (MAPP) and maleatead polyethylene (MAPE). The effect of those treatments on the physical, mechanical and structural properties of the thermoplastic-CFs biocomposites, which are mainly related to the fibre–matrix compatibility, was analyzed. Results show that the addition of 20 % (vol/vol) of unmodified CFs to the thermoplastic matrices results in a significant decrease of the tensile strength associated to a weak interfacial adhesion was assessed by SEM. However, when the adhesion promoters were added to the mixture, a significant increase in the tensile strength was noticed, particularly when the composites were obtained by a process at 180 °C. On the contrary, acetylation and silane treatments of the CFs did not result in any practical improvement of the macroscopic properties of the biocompositesPostprint (author's final draft

Effect of moisture on the reactivity of alpha-tricalcium phosphate

The ability of the high-temperature polymorph of tricalcium phosphate, a-TCP, to hydrolyse to calcium-deficient hydroxyapatite underlies many developments in the field of synthetic bone grafts, including calcium phosphate cements, foams, and self-setting inks. The objective of the present work was to investigate the effect of humidity on a-TCP powder reactivity. The results showed that a 3-week incubation at high relative humidity (80%) had no impact on reactivity, but, as the incubation was prolonged, the powder started to hydrolyse. This reactivity was associated to the presence of defects and to an amorphous phase induced during powder milling. Moisture studies performed under static/dynamic conditions gave comparable water adsorption percentages. The dynamic studies further proved irreversible water sorption, indicating that some water molecules reacted with the powder after short incubation times. Taken together, these results demonstrate that, although a-TCP powder adsorbs water from moisture immediately, the impact on reactivity appears only after several weeks of storage.Peer ReviewedPostprint (published version

Environmental impact assessment of Polylactide(PLA)/chicken feathers biocomposite materials

The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184¿×¿184¿×¿2.2 mm3 was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLAPostprint (author's final draft

Chicken feathers based composites: a life cycle assessment

Chicken feathers (CFs) are a waste material generated from poultry industry in large quantities. A composite material constituted of poly lactide and CFs is proposed in order to prepare a biodegradable composite with low environmental impact. In order to evaluate its environmental impact, a Life Cycle Assessment (LCA) is performed. The results show that, from the environmental point of view, the more chicken feathers in the material, the greater is its impact. This is mainly due to the non - inclusion of the impact data regarding CFs current waste management treatments required in accordance with the European Directive CE 1069/2009 (in study) and to the high energy consumption of the pre - treatment stages (cleaning and sanitizing) required to transform CFs waste into a CFs technical material that can be used for the preparation of CFs/PLA composites material, which needs to be optimized.Peer ReviewedPostprint (published version