136 research outputs found

    Biotechnological preparation of gelatines from chicken feet

    Get PDF
    In the European Union (EU), about five tons of poultry by-product tissues are produced every year. Due to their high collagen content, they represent a significant raw material source for gelatine production. The aim of the paper was the biotechnological preparation of gelatine from chicken feet. The influence of selected process factors on the gelatine yield, gel strength, viscosity, and ash of gelatine was observed; a two-level factor design of experiments with three variable process factors (enzyme addition, enzyme treatment time, and gelatine extraction time) was applied. After grinding and separating soluble proteins and fat, the purified raw material was treated in water at pH 7.5 with the addition of endoprotease at 23 degrees C and after thorough washing with water at 80 degrees C, gelatine was extracted. By the suitable choice of process conditions, gelatine with high gel strength (220-320 bloom), low ash content (s can be prepared. The extraction efficiency was 18-38%. The presented technology is innovative mainly by the enzymatic processing of the source raw material, which is economically, technologically, and environmentally beneficial for manufacturers. Chicken gelatines are a suitable alternative to gelatines made from mammals or fish, and can be used in many food, pharmaceutical, and biomedical applications.Internal Grant Agency of the Faculty of Technology, Tomas Bata University in Zlin [IGA/FT/2019/003

    Preparation of collagen concentrate from chicken feet

    Get PDF
    The meat-processing industry produces a huge and ever greater amount of involuntary by-products at slaughterhouses, which increase significantly the waste amount. In terms of poultry, these comprise feet, heads, viscera and skin - items that are rich in protein, especially collagen. The latter can be gained through a procedure that involves grinding and defatting raw material, since poultry by-products from meat-processing industry contain a wide range of fat (15 – 70 %). Indeed, it is also necessary to extract other non-collagenic matter, such as pigment and water-soluble proteins. In this study, non-collagen components were removed by treatment of chicken feet in 0.1% NaOH. Three methods of defatting of raw material (applying NaHCO3, lipolytic enzyme and 10 different solvent systems) were tested. The use of solvent mixture of petroleum ether and ethanol proved to be the most efficient method of defatting chicken feet with a residual fat content of approximately 5 %. Collagen concentrate prepared this way possesses the potential to be utilized by commercial sectors, such as the food or pharmaceutical industry. © 2018 Computer Society of the Republic of China. All rights reserved

    Hydration and barrier properties of emulsions with the addition of keratin hydrolysate

    Get PDF
    Although keratin hydrolysates (KH) are added to skin care agents, detailed studies on the moisturising effects of KH are lacking. The aim of this study is to test whether adding KH into an ointment base (OB) heighten hydration of the skin and diminish transepidermal loss of water (TEWL). Formulations containing 2%, 4%, and 6% of KH (based on OB weight) were prepared. Hydration, TEWL and skin pH were measured; intervals of measurements were as follows: 1, 2, 3, 4, 24 and 48 h. Testing was carried out on 10 men. In terms of hydration, supplementing the OB with 2% KH is optimal, as an 11-19% increase occurs in hydration of stratum corneum (SC). All the formulations with added KH as tested caused TEWL to decline after application. Keratin hydrolysate makes for an excellent occlusive; adding it to OB results in a 30-50% reduction in TEWL after application. KH functions as a humectant as well, as it helps to bind water from the lower layers of the epidermis to the SC. Formulations with additions of 2-6% of KH were stable in structure and did not cause phase separation even after 6 months storage. © 2018 by the authors

    Chicken skin gelatine as an alternative to pork and beef gelatines

    Get PDF
    Poultry meat-processing industry produces considerably large amounts of by-products (such as chicken skins, heads, feathers, viscera, bones and legs) containing significant volumes of proteins, particularly collagen. One of the possibilities of advantageous utilization of these under-used by-products can be their application as a raw material rich in collagen for preparation of gelatine, a partial hydrolysate of collagen. In the present study, chicken skins obtained as a by-product from the chicken-breast processing were purified from non-collagen proteins, pigments and fats. Collagen was treated with proteolytic enzymes and the gelatine extraction was performed in distilled water at temperatures of 40, 50, 60, 70 and 80 °C during the constant extraction time of 60 min. The influence of the technological conditions on gelatine functional properties including viscosity, clarity, water holding and fat binding capacity, emulsifying and foaming properties was explored. Certain functional properties of prepared gelatines were significantly affected by the extraction temperature, while on some other properties the extraction temperature had no significant effect. Viscosity of prepared chicken skin gelatines was in the range from 3 to 5.7 mPa.s -1 , clarity from 1.5 to 2%, water holding capacity from 3.8 to 5.6 mL.g -1 , fat binding capacity from 0.9 to 1.3 mL.g -1 , emulsion capacity from 35 to 50%, emulsion stability from 73 to 88%, foaming capacity from 18 to 61% and finally foaming stability was from 4 to 39%. Chicken skin gelatines were compared with commercial food grade pork and beef gelatines. Prepared chicken skin gelatines showed better viscosity, fat binding capacity and foaming stability than mammalian gelatines, while water holding capacity, emulsifying stability and foaming capacity were not as good as in beef and pork gelatines. Emulsifying capacity was comparable with commercial gelatines. Therefore, chicken skin gelatine has the potential as an alternative to traditional gelatines from mammalian sources, such as pork or beef bones and skins. © 2019 Potravinarstvo Slovak Journal of Food Sciences

    Preparation of keratin hydrolysate from chicken feathers and its application in cosmetics

    Get PDF
    Keratin hydrolysates (KHs) are established standard components in hair cosmetics. Understanding the moisturizing effects of KH is advantageous for skin-care cosmetics. The goals of the protocol are: (1) to process chicken feathers into KH by alkaline-enzymatic hydrolysis and purify it by dialysis, and (2) to test if adding KH into an ointment base (OB) increases hydration of the skin and improves skin barrier function by diminishing transepidermal water loss (TEWL). During alkaline-enzymatic hydrolysis feathers are first incubated at a higher temperature in an alkaline environment and then, under mild conditions, hydrolyzed with proteolytic enzyme. The solution of KH is dialyzed, vacuum dried, and milled to a fine powder. Cosmetic formulations comprising from oil in water emulsion (O/W) containing 2, 4, and 6 weight% of KH (based on the weight of the OB) are prepared. Testing the moisturizing properties of KH is carried out on 10 men and 10 women at time intervals of 1, 2, 3, 4, 24, and 48 h. Tested formulations are spread at degreased volar forearm sites. The skin hydration of stratum corneum (SC) is assessed by measuring capacitance of the skin, which is one of the most world-wide used and simple methods. TEWL is based on measuring the quantity of water transported per a defined area and period of time from the skin. Both methods are fully non-invasive. KH makes for an excellent occlusive; depending on the addition of KH into OB, it brings about a 30% reduction in TEWL after application. KH also functions as a humectant, as it binds water from the lower layers of the epidermis to the SC; at the optimum KH addition in the OB, up to 19% rise in hydration in men and 22% rise in women occurs. © 2017 Journal of Visualized Experiments

    Thermal stability of prepared chicken feet gelatine gel in comparison with commercial gelatines

    Get PDF
    Gelatine is, due to its functional properties, currently widely used not only in the food industry (in the production of confectionery, dairy products, canned food) but also in pharmacy (soft and hard capsules) and cosmetics (creams, lotions) where it applies its ability to form thermoreversible gel stronger than most other gelling agents. What is more, it provides further excellent properties including emulsifying, foaming, stabilizing, film-forming, water and fat binding, texturizing, thickening, and adhesive attributes which makes it a very important hydrocolloid. Gelatine is obtained from the raw material of animal tissues containing collagen, usually mammalian skin or bones. For religious reasons in some countries, pork or bovine gelatine must be replaced by an alternative form, such as poultry or fish gelatine. The quality of gelatine is assessed mostly by the strength of gelatine gel which strongly depends on ambient temperature or humidity. Extraction conditions may also significantly affect the quality of gelatine. This study examined possible changes in the strength of gelatine gels prepared from laboratory-produced chicken feet gelatine and compared them with commercially available pork and beef gelatines at temperatures of 23, 29, and 35 °C at 60 and 80% humidity. While at 23 °C thermal stability of prepared chicken gelatine was monitored higher than in commercial gelatines, experiments at 29 and 35 °C provided equivalent results for chicken and commercial gelatines. Therefore, prepared chicken gelatine offers a significant potential to become an alternative to traditional gelatines. The information about gelatine gels thermal stability is of great importance for applications not only in the food; but also in the pharmaceutical industry. © 2020 Potravinarstvo Slovak Journal of Food Sciences

    Hydration and barrier potential of cosmetic matrices with bee products

    Get PDF
    Honey, honey extracts, and bee products belong to traditionally used bioactive molecules in many areas. The aim of the study was primarily to evaluate the effect of cosmetic matrices containing honey and bee products on the skin. The study is complemented by a questionnaire survey on the knowledge and awareness of the effects and potential uses of bee products. The effect of bee molecules at various concentrations was observed by applying 12 formulations to the skin of the volar side of the forearm by non-invasive bioengineering methods on a set of 24 volunteers for 48 h. Very good moisturizing properties have been found in matrices with the glycerin extract of honey. Matrices containing forest honey had better moisturizing effects than those containing flower honey. Barrier properties were enhanced by gradual absorption, especially in formulations with both glycerin and aqueous honey extract. The observed organoleptic properties of the matrices assessed by sensory analysis through 12 evaluators did not show statistically significant differences except for color and spreadability. There are differences in the ability to hydrate the skin, reduce the loss of epidermal water, and affect the pH of the skin surface, including the organoleptic properties between honey and bee product matrices according to their type and concentration.Internal strategic project of Tomas Bata University in Zli

    Enzyme conditioning of chicken collagen and taguchi design of experiments enhancing the yield and quality of prepared gelatins

    Get PDF
    During the production of mechanically deboned chicken meat (MDCM), a by-product is created that has no adequate use and is mostly disposed of in rendering plants. Due to the high content of collagen, it is a suitable raw material for the production of gelatin and hydrolysates. The purpose of the paper was to process the MDCM by-product into gelatin by 3-step extraction. An innovative method was used to prepare the starting raw material for gelatin extraction, demineralization in HCl, and conditioning with a proteolytic enzyme. A Taguchi design with two process factors (extraction temperature and extraction time) was used at three levels (42, 46, and 50 °C; 20, 40, and 60 min) to optimize the processing of the MDCM by-product into gelatins. The gel-forming and surface properties of the prepared gelatins were analyzed in detail. Depending on the processing conditions, gelatins are prepared with a gel strength of up to 390 Bloom, a viscosity of 0.9–6.8 mPa·s, a melting point of 29.9–38.4 °C, a gelling point of 14.9–17.6 °C, excellent water- and fat-holding capacity, and good foaming and emulsifying capacity and stability. The advantage of MDCM by-product processing technology is a very high degree of conversion (up to 77%) of the starting collagen raw material to gelatins and the preparation of 3 qualitatively different gelatin fractions suitable for a wide range of food, pharmaceutical, and cosmetic applications. Gelatins prepared from MDCM by-product can expand the offer of gelatins from other than beef and pork tissues. © 2023 by the authors

    Stability and in vivo efficiency of natural cosmetic emulsion systems with the addition of vegetable oils

    Get PDF
    The aim of the paper is to test stability and biophysical properties of hydrophilic and lipophilic emulsions with selected vegetable seed oils: limnanthes alba, Prunus amygdalus dulcis, Cannabis saliva, Rosa rubiginosa and Hellianthus annuus. Biophysical properties of emulsions are investigated in vivo using non-invasive instrumental methods (comeometry, tewametry and pH) in a group of 12 healthy women volunteers. Their stability profiles (colour, phase separation and centrifugation) under various temperatures (9, 25, 37 and 57 degrees C) and storage time (24 hours, 2, 7, 14, 21 and 28 days) were monitored. The moisturising activities of the emulsions supplemented with various oils were comparable. The lipophilic emulsions showed a better ability to improve the condition of the skin barrier due to formation of a surface lipid film. The tested formulations regulated the pH of the skin towards neutral values. Lipophilic emulsions showed earlier phase separation and changes in colour. The greatest resistance to thermal stress during storage was observed for the emulsion bases. Emulsions containing oils, except for those with rosehip and hempseed oils, were stable up to the temperature of 37 degrees C. The studied emulsion systems are excellent vehicles of vegetable oils and exhibit relatively good stability, benefiting the natural properties of skin

    Valorization of a by-product from the production of mechanically deboned chicken meat for preparation of gelatins

    Get PDF
    In recent decades, food waste management has become a key priority of industrial and food companies, state authorities and consumers as well. The paper describes the biotechnological processing of mechanically deboned chicken meat (MDCM) by-product, rich in collagen, into gelatins. A factorial design at two levels was used to study three selected process conditions (enzyme conditioning time, gelatin extraction temperature and gelatin extraction time). The efficiency of the technological process of valorization of MDCM by-product into gelatins was evaluated by % conversion of the by-product into gelatins and some qualitative parameters of gelatins (gel strength, viscosity and ash content). Under optimal processing conditions (48-72 h of enzyme conditioning time, 73-78 °C gelatin extraction temperature and 100-150 min gelatin extraction time), MDCM by-product can be processed with 30-32% efficiency into gelatins with a gel strength of 140 Bloom, a viscosity of 2.5 mPa.s and an ash content of 5.0% (which can be reduced by deionization using ion-exchange resins). MDCM is a promising food by-product for valorization into gelatins, which have potential applications in food-, pharmaceutical- and cosmetic fields. The presented technology contributes not only to food sustainability but also to the model of a circular economy.European Regional Development Fund under the project CEBIA-Tech [CZ.1.05/2.1.00/03.0089]European Regional Development Fund, ERDF: CZ.1.05/2.1.00/03.008
    • …
    corecore