13 research outputs found
A Brief Comparative Study on Removal of Toxic Dyes by Different Types of Clay
Increasing amount of organic dyes in the ecosystem particularly in wastewater has propelled the search for more efficient low-cost bio adsorbents. Different techniques have been used for the treatment of wastewater containing toxic dyes such as: biological degradation, oxidation, adsorption, reverse osmosis, and membrane filtration. Among all these processes mentioned, adsorption with low cost adsorbents has been recognized as one of the cost effective and efficient techniques for treatment of industrial wastewater from organic and inorganic pollutants. Clays as material adsorbents for the removal of various toxic dyes from aqueous solutions as potential alternatives to activated carbons has recently received widespread attention because of the environmental-friendly nature of clay materials. This chapter presents a comprehensive account of the techniques used for the removal of industrial cationic and anionic dyes from water during the last 10Â years with special reference to the adsorption by using low cost materials in decontamination processes. Effects of different adsorption parameters on the performance of clays as adsorbents have been also discussed. Various challenges encountered in using clay materials are highlighted and a number of future prospects for the adsorbents are proposed
Equilibrium and thermodynamic studies for the removal of As(V) ions from aqueous solution using dried plants as adsorbents
This paper reports the feasibility of using dried plants to remove As(V) from aqueous solution under different experimental conditions. For this purpose, micro-particles of both Calami rhizoma and Withania frutescens plants, have been separately used without pre-treatment as natural adsorbents. Effect of various process parameters, namely adsorbent dose, contact time, initial As(V) concentration, temperature, and pH has been studied. The experimental data were analyzed using Freundlich, Langmuir, and Temkin isotherm models to determine the mechanistic parameters related to the adsorption process. It was found that the Langmuir and Freundlich models fitted well. Thermodynamic parameters, viz, free energy change (ΔG0), enthalpy change (ΔH0), and entropy change (ΔS0), were also determined. The negative values of free energy change indicated the spontaneous nature of the adsorption and the positive values of enthalpy change suggested the endothermic nature of the adsorption process. The presence of some competing ions like Cl−, NO3-, Mg2+, Cd2+, Cu2+, and Zn2+ did not affect the arsenate uptake or removal, whereas HPO42- strongly interfered negatively
Orthophosphate ion adsorption onto raw shrimp shells
The aim of this work was to develop new low-cost adsorbents obtained from animal origins, available in large quantities and environmentally friendly. Raw shrimp shell (RSS), a biomaterial of animal origin, is abundant, available, renewable and non-toxic. It has physicochemical properties that can induce a significant adsorptive activity. In this study, the removal of phosphate anions (H2PO4-, HPO42-) from aqueous solution by adsorption onto raw shrimp shells was studied. The surface micro-morphology of the biomaterial was investigated using scanning electron microscope and qualitative element composition was analyzed using energy dispersive X-ray and infrared spectroscopies. The efficiency of the biomaterial was investigated using a batch adsorption technique under different experiment conditions, achieved by varying parameters such as adsorbent dosage, the contact time, the initial phosphate anion concentrations, the temperature and the initial solution pH. Results show that the kinetics adsorption of phosphate ions by the biomaterial is relatively quick and the biomaterial showed a high adsorption capacity of 0.20 g∙g-1 and 0.4 g∙g-1 for HPO42- and H2PO4-, respectively. The adsorption data were analyzed using the Langmuir, Freundlich and Temkin adsorption isotherms to determine the nature of the adsorption sites. Both Langmuir and Freundlich adsorption models showed good fits to the experimental adsorption data.Cette étude s’inscrit dans le cadre de certains de nos travaux visant la valorisation de matériaux naturels d’origine végétale, animale et minérale pouvant rendre les procédés d’épuration des eaux simples et moins coûteux. Les carapaces de crevettes à l’état brut, biomatériau d’origine animale, entrent dans cette catégorie. Il est abondant, disponible, renouvelable et non toxique, et présente des propriétés physicochimiques qui peuvent induire une activité adsorbante importante. Le biomatériau a été caractérisé par microscopie électronique à balayage, par spectroscopie d’émission X et spectroscopie infrarouge. Une étude complète de l’adsorption des ions phosphates (HPO42- et H2PO4-) sur des carapace de crevettes à l’état brut a été effectuée. L’influence de paramètres physicochimiques tels que la masse d’adsorbant, le temps de contact, le pH, la température et la concentration initiale de phosphate a été étudiée. Les résultats obtenus montrent une cinétique rapide et une grande capacité de ce biomatériau à retenir les ions phosphates pouvant atteindre 0,20 g∙g-1 pour HPO42- et 0,40 g∙g-1 pour H2PO4-. Les isothermes d’adsorption étudiés (Langmuir, Freundlich et Temkin) montrent une bonne corrélation avec les modèles de Langmuir et de Freundlich
Factor design methodology for modelling and optimization of carcinogenic acid dye adsorption onto Moroccan prickly pear cactus peel
In this study, the modelling and optimization studies of the carcinogenic acid dye sorption from aqueous solutions were carried out using the Factor Design Methodology. This methodology provides a predictive model of the response in the range of variables studied and determines the optimum conditions for the best performance. The sorption of acid dye AB113 on Moroccan prickly pear cactus peel (MPPCP) was chosen as a case study of a typical removal process. Minitab17 software was used to study the effects of adsorption parameters, including initial dye concentration, solution pH, adsorbent dose, contact time, and temperature. Analysis of variance (ANOVA) was used to evaluate the experimental results obtained. The studied parameters at two levels (-1 and +1) were coded as X1, X2, X3, X4 and X5, consecutively. The optimum conditions obtained for the adsorption of AB113 dye were: 1 g for the mass of MPPCP, 6 for the initial solution pH, 180 min for the contact time and 20 mg/L for the initial dye concentration. The results show that the model is well adapted to the experimental data, indicating the suitability of the model and the success of the factorial design methodology in optimizing the adsorption conditions
Adsorption of Metal Ions from Single and Binary Aqueous Systems on Bio-Nanocomposite, Alginate-Clay
The aim of this work is to characterize and evaluate the retention of Cu2+ and Ni2+ from single and binary systems by alginate-Moroccan clay bio-composite with the utilization of calcium chloride as a cross-linking agent, using the ionotropic gelation method. The bio-nanocomposite was characterized by using a variety of techniques (SEM, EDX, XRD, and pHPZC). The efficiency of the adsorbent was investigated under different experimental conditions by varying parameters such as pH, initial concentration, and contact time. To demonstrate the adsorption kinetics, various kinetic models were tried and assessed, including pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models. The research results show that the adsorption process of Cu2+ and Ni2+ metal ions follows a pseudo-second-order kinetic model, and the corresponding rate constants were identified. To evaluate the parameters related to the adsorption process in both single and binary systems, different mathematical models of isotherms, such as Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich, were investigated. The correlation coefficients obtained showed that the most suitable isotherm for describing this adsorption process is the Langmuir model. The process is considered to be physical and endothermic, as suggested by the positive values of ΔH° and ΔS°, indicating increased randomness at the solid/liquid interface during Cu2+ and Ni2+ adsorption. Furthermore, the spontaneity of the process is confirmed by the negative values of ∆G°. The bio-nanocomposite beads demonstrated a maximum adsorption capacity of 370.37 mg/g for Ni2+ and 454.54 mg/g for Cu2+ in the single system. In the binary system, the maximum adsorption capacities were observed to be 357.14 mg/g for Ni2+ and 370.37 mg/g for Cu2+. There is significant evidence for the use of alginate-Moroccan clay bio-nanocomposite as a cost-effective alternative adsorbent for the efficient removal of metal ions in single and binary systems
Kinetic and equilibrium isotherm studies for the removal of acid blue 113 dye by dried
Water pollution is an alarming problem in developing countries. Dried algae can be considered as potential and suitable bio-sorbents due to their fast and easy growth and high availability. The special surface properties of these algae allow them to adsorb different types of organic and inorganic pollutants from solutions. In this context, the removal of anionic acid blue 113 dye (AB113) from aqueous solutions by dried Corallina officinalis alga as low-cost bio-sorbent was chosen as a case study of a typical remediation process of water contaminants. The effect of various environmental and physicochemical parameters has been studied. The results show that the equilibrium adsorption was established within 120 min. The sorption phenomenon was investigated by determining the process kinetics at different concentrations and the adsorption isotherms at different temperatures. The kinetics results showed that the pseudo second-order kinetics model generates the best agreement with the experimental data. The modeling results showed that linear Langmuir and Freundlich models appear to fit the adsorption data better than Temkin model for the adsorption of AB113 onto dried C. officinalis alga. It can be concluded that C. Officinalis alga can be successfully used as adsorbent