TERRESTRIAL LASER SCANNER FOR MONITORING THE DEFORMATIONS AND THE DAMAGES OF BUILDINGS

scanner provides the ability to detect the geometric 3D model of a building without any physical contact with the structure. Knowledge of the 3D model will give the opportunity to study the deformation and quantify the damages. Three case studies are presented relating to damaged and/or unsafe buildings: Sivillier Castle (Villasor - Sardinia- Italy), the Bell Tower of Mores (Sardinia-Italy) and industrial building (Cagliari - Italy). The first two cases concern buildings of historical and architectural importance that present a state of compromised conservation; the last, an industrial building compromised by fire. In all cases, a laser scanner survey was carried out that not only provided valuable information but also highlighted structural metric deformation and degradation

Surgical management of retraction pockets: Does mastoidectomy have a role?

Introduction Retraction pocket is a condition in which the eardrum lies deeper within the middle ear. Its management has no consensus in literature. Objective To assess the role of mastoidectomy in the management of retraction pockets added to a tympanoplasty. Methods Prospective study of patients with retraction pocket and referred to surgery. The patients were randomly assigned to two groups: one managed with tympanoplasty and mastoidectomy and the other group with tympanoplasty only. The minimum follow-up considered was 12 months. The outcomes were: integrity of eardrum, recurrence, and hearing status. Results This study included 43 patients. In 24 cases retraction occurred in the posterior half of the eardrum, and in 19 patients there was clinical evidence of ossicular interruption. The two groups of treatment were composed by: 21 patients that underwent tympanoplasty with mastoidectomy and 22 patients had only tympanoplasty. One case of the first group had a recurrence. In 32 cases patients follow up was longer than 48 months. The average air-bone gap changed from 22.1 dB to 5 dB. The percentage of air-bone gap improvement was assessed at 60% in those patients treated with mastoidectomy, and 64.3% in those without it (p > 0.5). Conclusion Tympanoplasty and ossiculoplasty should be considered to treat atelectatic middle ear and ossicular chain interruption. Mastoidectomy as a way to increase air volume in the ear seems to be a paradox; it does not add favorable prognostic factor to management of retraction pockets

Message handling system concepts and services in a land mobile satellite system

A network architecture containing the capabilities offered by the Message Handling System (MHS) to the PRODAT Land Mobile Satellite System (LMSS) is described taking into account the constraints of a preexisting satellite system which is going to become operational. The mapping between MHS services and PRODAT requirements is also reported and shows that the supplied performance can be significantly enhanced to both fixed and mobile users. The impact of the insertion of additional features on the system structure, especially on the centralized control unit, are also addressed

The European Mobile System (EMS)

The European Space Agency is presently procuring an L band payload in order to promote a regional European L band system coping with the specific needs of the European market. The payload, and the two communications systems to be supported, are described below. The potential market for EMS in Europe is discussed

Development of an early design tool for the sustainability assessment of positive energy districts: methodology, implementation and case-studies

The concept of Positive Energy District is one of the research ideas that embody the ambitions of decarbonization, renovation (both literal and in a wider perspective) and inclusivity for the urban environment portrayed in the EU activities. In this framework, the paper presents a modeling and simulation tool which allows for an early-design depth to be applied in the field of Positive Energy Districts renovation design and integrated performance assessment. The work aims at creating a tool for stakeholders and designers that would allow them to: a) Calculate carbon impacts along the life cycle for different technical systems and materials used for retrofitting; b) Compute use stage carbon emissions, including import-export of electricity; c) Computations of PED carbon emission balances, along the expected useful life of the district computing both embodied and the use stage carbon emissions. The tool has been created as a spreadsheet including typical profiles of energy use per building archetype, with the inclusion of available and free Life Cycle Assessment data within the life cycle carbon assessment and aims at jointly developing use stage and life cycle considerations. It was tested on a district case studies in the EU

management of blast and inhalation injury

Key points All patients with facial burns may be suspected of having 'difficult-to-control' airways owing to smoke inhalation injury (SII). Many of them either have an incorrect diagnosis, or mild-to-moderate injury with unrecognised aggravating respiratory failure. For a diagnosis of inhalation injury, it is necessary to follow the patient closely for >48 h. Inhalation injury is a condition with different clinical presentations. Clinical follow-up is necessary to improve patient care, to help guide treatment and to provide clues for therapeutic interventions. Notwithstanding intensive care treatment including airway intubation and mechanical ventilation, many patients with severe inhalation injury remain under-treated. Educational aims To discuss the initial approach and assessment of a patient with SII. To help the reader recognise different clinical pictures of inhalation injury. To outline management and discuss treatment. Summary "Inhalation injury" describes a variety of insults caused by the aspiration of superheated gases, steam or noxious products of incomplete combustion. Inhalation injury involves the entire respiratory system. Early diagnosis based on history and physical examination, in addition to careful monitoring for respiratory complications, is mandatory. As there is no specific treatment for inhalation injury, management involves providing the necessary degree of support required to compensate for upper airway swelling and impairment in gas exchange. Airway intubation and mechanical ventilation may be required while the endobronchial and alveolar mucosa are regenerating. Primary blast injury (BI) is caused by immediate pressure variations, which are the product of rapid sequences of compression and decompression. Secondary and tertiary BI include lesions caused when the subject is thrown against rigid structures or is hit by flying objects. Its diagnosis and therapy follows guidelines for emergency care

Mediterranean diet and cancer: epidemiological evidence and mechanism of selected aspects

Background: Populations living in the area of the Mediterranean Sea suffered by decreased incidence of cancer compared with those living in the regions of northern Europe and US countries, attributed to healthier dietary habits. Nowadays, we are assisting to a moving away from the traditional Mediterranean dietary pattern, but whether this changing is influencing risk of cancers is still unclear. The aim of the study was to review recent evidence on potential relationship between the adherence to the Mediterranean diet and cancer. Discussion: The most recent pooled analyses of epidemiological studies supported strongly the hypothesis that the Mediterranean diet may play a role in preventing several types of cancers, especially those of digestive tract, whereas contrasting results were reported for hormone-dependent cancers. Specific aspects of the Mediterranean diet such as high fruit and vegetables and low red processed meat intake may explain such protective effects. Moreover, evidence regarding olive oil and whole grains increase the beneficial effects of such dietary pattern against cancer. Conclusions: Literature evidence actually demonstrates that the increased adherence to the Mediterranean dietary pattern is beneficial to health across populations and may translate a protective effect with certain cancers

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility

PBAT based composites reinforced with microcrystalline cellulose obtained from softwood almond shells

This study explores the processability, mechanical, and thermal properties of biocompostable composites based on poly (butylene adipate-co-terephthalate) (PBAT) as polymer matrix and microcrystalline cellulose (MCC) derived from softwood almond (Prunus dulcis) shells (as-MCC) as filler at two different weight concentration, i.e., 10 wt% and 20 wt%. The materials were processed by melt mixing and a commercial MCC (c-MCC) was used as filler comparison. The fibrillar shape of as-MCC particles was found to change the rheological behavior of PBAT, particularly at the highest concentration. The melt mixing processing allowed obtaining a uniform dispersion of both kinds of fillers, slightly reducing the L/D ratio of as-MCC fibers. The as-MCC particles led to a higher increase of the elastic modulus of PBAT if compared to the c-MCC counterparts. Both the MCC fillers caused a drastic reduction of the elongation at break, although it was higher than 120% also at the highest filler concentrations. DSC analysis revealed that both MCC fillers poorly affected the matrix crystallinity, although as-MCC induced a slight PBAT crystallinity increase from 8.8% up to 10.9% for PBAT/as-MCC 20%. Therefore, this work demonstrates the great potential of MCC particles derived from almond shells as filler for biocompostable composites fabrication