Formation of interfacial molybdenum carbide for DLC lubricated by MoDTC: Origin of wear mechanism

A large amount of research has been devoted to the effect of molybdenum dithiocarbamate (MoDTC) additives on the lubricating performances of carbon-based coatings, showing that a high wear rate is produced when the MoDTC is blended with the base oil. However, the mechanisms leading to the coating removal are not fully understood yet. In this work, the friction and wear performances of an amorphous hydrogenated DLC coating doped with silicon and oxygen have been analysed when lubricated by MoDTC-containing oils. Tribological experiments have been conducted with DLC/steel and DLC/DLC contacts under boundary lubrication conditions using a ball-on-flat tribometer. To understand the wear mechanism, the chemical composition of the tribofilm formed on the steel ball counterpart was investigated by X-ray Photoelectron Spectroscopy (XPS). Transmission Electron Microscopy (TEM) coupled with Energy Dispersive X-Ray Spectroscopy (EDX). A new DLC wear model has been proposed and validated

Modeling and simulation in tribology across scales: An overview

This review summarizes recent advances in the area of tribology based on the outcome of a Lorentz Center workshop surveying various physical, chemical and mechanical phenomena across scales. Among the main themes discussed were those of rough surface representations, the breakdown of continuum theories at the nano- and micro-scales, as well as multiscale and multiphysics aspects for analytical and computational models relevant to applications spanning a variety of sectors, from automotive to biotribology and nanotechnology. Significant effort is still required to account for complementary nonlinear effects of plasticity, adhesion, friction, wear, lubrication and surface chemistry in tribological models. For each topic, we propose some research directions

A Semi-deterministic Wear Model Considering the Effect of Zinc Dialkyl Dithiophosphate Tribofilm

Tribochemistry plays a very important role in the behaviour of systems in tribologically loaded contacts under boundary lubrication conditions. Previous works have mainly reported contact mechanics simulations for capturing the boundary lubrication regime, but the real mechanism in which tribofilms reduce wear is still unclear. In this paper, the wear prediction capabilities of a recently published mechanochemical simulation approach (Ghanbarzadeh et al. in Tribol Int, 2014) are tested. The wear model, which involves a time- and spatially dependent coefficient of wear, was tested for two additive concentrations and three temperatures at different times, and the predictions are validated against experimental results. The experiments were conducted using a mini-traction machine in a sliding/rolling condition, and the spacer layer interferometry method was used to measure the tribofilm thickness. Wear measurements have been taken using a white-light interferometry. Good agreement is seen between simulation and experiment in terms of tribofilm thickness and wear depth predictions

Experimental simulation of chemical reactions between ZDDP tribofilms and steel surfaces during friction processes

International audienceFriction tests are performed in a controlled environment (Ultra High Vacuum), between steel surfaces and a ZDDP tribofilm at different contact severities. According to AES analyses, evidence of chemical reactions activated by friction is given. The reaction of the ZDDP tribofilm with the native iron oxide could partially explain its antiwear behavior

Friction response of ZDDP thermal film and tribofilm

International audienc

Zinc phosphate chain length study under high hydrostatic pressure by Raman spectroscopy

International audienc