Investigation of the Microstructure and Mechanical Properties of an Ultrahigh Strength Martensitic Steel Fabricated Using Laser Metal Deposition Additive Manufacturing

Ultrahigh strength steels were additively manufactured (AM) using different batches of powders by means of the laser metal deposition (LMD) technique. After quenching and tempering treatments, the microstructures, mechanical properties, and fracture modes of ultrahigh strength steels were investigated by several testing methods. The results demonstrate that martensite and Fe3C cementite were found in the three specimens after quenching and tempering treatments, and the tempered martensite microstructure had a lamellar structure in all specimens. The widths of these martensite lathes were observed to be different for the APHT-1, APHT-2, and APHT-3 samples, and their sizes were 1.92 +/- 0.90 mu m, 1.87 +/- 1.09 mu m, and 1.82 +/- 0.85 mu m, respectively. The martensitic steel exhibited excellent mechanical properties (tensile strength and impact toughness). The yield strength and the ultimate tensile strength of the APHT-3 sample reached 1582 MPa and 1779 MPa, respectively. Moreover, the value of the impact energy for the APHT-1 sample was 46.4 J. In addition, with the changes in the batches of ultrahigh strength steel powders, the fracture mode changed from ductile fracture to brittle fracture under tensile force and impact loads

Electric Field Effect on the Reactivity of Solid State Materials: The Case of Single Layer Graphene

This manuscript reports the first example of charge-doping-induced reactivity enhancement in macroscopic-sized solid state material. Single layer graphene is supported on a Si wafer that has a 300 nm thick SiO2 layer and is heated photothermally in air to approximate to 240 degrees C. Applying both positive and negative pulsed back gate voltages increases the rate of graphene oxidation, as measured by the change of I-D/I-G ratio using Raman spectroscopy. The fact that both electron and hole doping increase the reactivity argues against electrochemical oxidation and suggests a new mechanism is at play. The enhancement effect increases with the magnitude and the frequency of the square wave back gate voltage. Density functional theory calculations indicate that the activation barriers for O-2 insertion into graphene and desorption of CO2 decrease in the presence of an electric field. This study suggests charge doping as a new approach that can modulate the reactivity of solid state materials in real time and compliment chemical-based catalysis

Novel Coating to Minimize Corrosion of Glass-Ceramics for Dental Applications

The effect of a novel silicon carbide (SiC) coating on the chemical durability of a fluorapatite glass-ceramic veneer was investigated by examining weight loss and ion release levels. The hypothesis that this novel coating will exhibit significant corrosion resistance was tested. Inductively coupled plasma atomic emission spectrometer (ICP) was used for ion concentration determination and scanning electron microscopy (SEM) for surface morphology analyses. Samples were immersed in pH 10 and pH 2 buffer solutions to represent extreme conditions in the oral cavity. Analyses were done at 15 and 30 days. The SiC coated group demonstrated significant reduction in weight loss across all solutions and time points (p < 0.0001). Ion release analyses demonstrated either a marginally lower or a significantly lower release of ions for the SiC-coated disks. SEM analysis reveals planarization of surfaces by the SiC-coated group. The surfaces of coated samples were not as corroded as the non-coated samples, which is indicative of the protective nature of these coatings. In conclusion, SiC is a novel coating that holds promise for improving the performance of ceramic materials used for dental applications

The surgical safety checklist and patient outcomes after surgery: a prospective observational cohort study, systematic review and meta-analysis

© 2017 British Journal of Anaesthesia Background: The surgical safety checklist is widely used to improve the quality of perioperative care. However, clinicians continue to debate the clinical effectiveness of this tool. Methods: Prospective analysis of data from the International Surgical Outcomes Study (ISOS), an international observational study of elective in-patient surgery, accompanied by a systematic review and meta-analysis of published literature. The exposure was surgical safety checklist use. The primary outcome was in-hospital mortality and the secondary outcome was postoperative complications. In the ISOS cohort, a multivariable multi-level generalized linear model was used to test associations. To further contextualise these findings, we included the results from the ISOS cohort in a meta-analysis. Results are reported as odds ratios (OR) with 95% confidence intervals. Results: We included 44 814 patients from 497 hospitals in 27 countries in the ISOS analysis. There were 40 245 (89.8%) patients exposed to the checklist, whilst 7508 (16.8%) sustained ≥1 postoperative complications and 207 (0.5%) died before hospital discharge. Checklist exposure was associated with reduced mortality [odds ratio (OR) 0.49 (0.32–0.77); P\u3c0.01], but no difference in complication rates [OR 1.02 (0.88–1.19); P=0.75]. In a systematic review, we screened 3732 records and identified 11 eligible studies of 453 292 patients including the ISOS cohort. Checklist exposure was associated with both reduced postoperative mortality [OR 0.75 (0.62–0.92); P\u3c0.01; I2=87%] and reduced complication rates [OR 0.73 (0.61–0.88); P\u3c0.01; I2=89%). Conclusions: Patients exposed to a surgical safety checklist experience better postoperative outcomes, but this could simply reflect wider quality of care in hospitals where checklist use is routine

Prospective observational cohort study on grading the severity of postoperative complications in global surgery research

Background The Clavien–Dindo classification is perhaps the most widely used approach for reporting postoperative complications in clinical trials. This system classifies complication severity by the treatment provided. However, it is unclear whether the Clavien–Dindo system can be used internationally in studies across differing healthcare systems in high- (HICs) and low- and middle-income countries (LMICs). Methods This was a secondary analysis of the International Surgical Outcomes Study (ISOS), a prospective observational cohort study of elective surgery in adults. Data collection occurred over a 7-day period. Severity of complications was graded using Clavien–Dindo and the simpler ISOS grading (mild, moderate or severe, based on guided investigator judgement). Severity grading was compared using the intraclass correlation coefficient (ICC). Data are presented as frequencies and ICC values (with 95 per cent c.i.). The analysis was stratified by income status of the country, comparing HICs with LMICs. Results A total of 44 814 patients were recruited from 474 hospitals in 27 countries (19 HICs and 8 LMICs). Some 7508 patients (16·8 per cent) experienced at least one postoperative complication, equivalent to 11 664 complications in total. Using the ISOS classification, 5504 of 11 664 complications (47·2 per cent) were graded as mild, 4244 (36·4 per cent) as moderate and 1916 (16·4 per cent) as severe. Using Clavien–Dindo, 6781 of 11 664 complications (58·1 per cent) were graded as I or II, 1740 (14·9 per cent) as III, 2408 (20·6 per cent) as IV and 735 (6·3 per cent) as V. Agreement between classification systems was poor overall (ICC 0·41, 95 per cent c.i. 0·20 to 0·55), and in LMICs (ICC 0·23, 0·05 to 0·38) and HICs (ICC 0·46, 0·25 to 0·59). Conclusion Caution is recommended when using a treatment approach to grade complications in global surgery studies, as this may introduce bias unintentionally

Critical care admission following elective surgery was not associated with survival benefit:prospective analysis of data from 27 countries

Purpose: As global initiatives increase patient access to surgical treatments, there is a need to define optimal levels of perioperative care. Our aim was to describe the relationship between the provision and use of critical care resources and postoperative mortality. Methods: Planned analysis of data collected during an international 7-day cohort study of adults undergoing elective in-patient surgery. We used risk-adjusted mixed-effects logistic regression models to evaluate the association between admission to critical care immediately after surgery and in-hospital mortality. We evaluated hospital-level associations between mortality and critical care admission immediately after surgery, critical care admission to treat life-threatening complications, and hospital provision of critical care beds. We evaluated the effect of national income using interaction tests. Results: 44,814 patients from 474 hospitals in 27 countries were available for analysis. Death was more frequent amongst patients admitted directly to critical care after surgery (critical care: 103/4317 patients [2%], standard ward: 99/39,566 patients [0.3%]; adjusted OR 3.01 [2.10–5.21]; p < 0.001). This association may differ with national income (high income countries OR 2.50 vs. low and middle income countries OR 4.68; p = 0.07). At hospital level, there was no association between mortality and critical care admission directly after surgery (p = 0.26), critical care admission to treat complications (p = 0.33), or provision of critical care beds (p = 0.70). Findings of the hospital-level analyses were not affected by national income status. A sensitivity analysis including only high-risk patients yielded similar findings. Conclusions: We did not identify any survival benefit from critical care admission following surgery