3,221 research outputs found
Evaluation of an Aerodynamic Particle Sizer With Certified Polydisperse Test Dusts
The Aerodynamic Particle Sizer (APS) is a near real time laser particle sizer that counts and sizes particles in the range of 0.5 /xm to 3 0 /xm, which makes it ideal for measuring the particle size distribution of fly ash from coal combustion. While the APS has proven to be a valuable instrument for measuring particle size distribution from flue gas streams, data indicate that the APS may not be providing an accurate particle size distribution over the entire range of 0.5 /xm to 30 /xm.
The primary objective of this study was to determine the ability of the APS to obtain an accurate particle size distribution and mass concentration of dusts such as suspended coal fly ash. A secondary objective was to compare the relative merits of the APS with an impactor and a multicyclone. A third objective was to develop an improved correction curve to allow the APS to give a more accurate mass particle size distribution and total mass concentration over the entire range of 0.5 /xm to 30 /xm.
The experimental effort consisted of design and assembly of a bench-scale aerosol generation and sampling system to disperse dry powders into an air stream where they could be sampled by four different methods. The four methods were: 1) APS, 2) Pollution Control Systems Inc. Mark 3 impactor, 3) Flow Sensor 6-stage multicyclone, and 4) modified EPA Method 5 dust loading. Tests were conducted with four different dusts including BCR67 and BCR70 dusts with certified known particle size distributions, and two fly ashes produced from pulverized coal combustion.
Measured mass median diameters with the APS were lower than the certified values for the test dusts, the greater error occurring for the larger particles. Both impactor and multicyclone measured particle size distributions were in good agreement with the certified distributions. A new efficiency curve was generated which enables the APS to provide the correct particle size distribution for the certified test dusts. The ability of the APS to provide an accurate particle size distribution over the entire range from 0.5 /xm to 30 fim is limited by high concentrations of small particles and low count efficiency for particles from 15 nm to 3 0 fim
The Management and Security Expert (MASE)
The Management and Security Expert (MASE) is a distributed expert system that monitors the operating systems and applications of a network. It is capable of gleaning the information provided by the different operating systems in order to optimize hardware and software performance; recognize potential hardware and/or software failure, and either repair the problem before it becomes an emergency, or notify the systems manager of the problem; and monitor applications and known security holes for indications of an intruder or virus. MASE can eradicate much of the guess work of system management
Coherent Contributions of Nuclear Mesons to Electroproduction and the HERMES Effect
We show that nuclear sigma, omega, and pi mesons can contribute coherently to
enhance the electroproduction cross section on nuclei for longitudinal virtual
photons at low Q^2 while depleting the cross section for transverse photons. We
are able to describe recent HERMES inelastic lepton-nucleus scattering data at
low Q^2 and small x using photon-meson and meson-nucleus couplings which are
consistent with (but not determined by) existing constraints from meson decay
widths, nuclear structure, deep inelastic scattering, and lepton pair
production data. We find that while nuclear-coherent pion currents are not
important for the present data, they could be observed at different kinematics.
Our model for coherent meson electroproduction requires the assumption of
mesonic currents and couplings which can be verified in separate experiments.
The observation of nuclear-coherent mesons in the final state would verify our
theory and allow the identification of a specific dynamical mechanism for
higher-twist processes.Comment: Published version with improved shadowing parametrization. To be
published in Physics Letters B 481, 245-252, May, 200
Euler characteristic of coherent sheaves on simplicial torics via the Stanley-Reisner ring
We combine work of Cox on the total coordinate ring of a toric variety and
results of Eisenbud-Mustata-Stillman and Mustata on cohomology of toric and
monomial ideals to obtain a formula for computing the Euler characteristic of a
Weil divisor D on a complete simplicial toric variety in terms of graded pieces
of the Cox ring and Stanley-Reisner ring. The main point is to use Alexander
duality to pass from the toric irrelevant ideal, which appears in the
computation of the Euler characteristic of D, to the Stanley-Reisner ideal of
the fan, which is used in defining the Chow ring. The formula also follows from
work of Maclagan-Smith.Comment: 9 pages 1 figur
Recommended from our members
ADVANCED HYBRID PARTICULATE COLLECTOR - PHASE III
A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the U.S. Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a unique configuration. The AHPC concept consists of a combination of fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two collection methods, both in the particulate collection step and in the transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emission with conventional ESPs, and it solves the problem of reentrainment and re-collection of dust in conventional baghouses. In Phase II, a 2.5-MW-scale AHPC was designed, constructed, installed, and tested at the Big Stone power station. For Phase III, further testing of an improved version of the 2.5-MW-scale AHPC at the Big Stone power station is planned to facilitate commercialization of the AHPC technology
Recommended from our members
Mercury Control With The Advanced Hybrid Paticulate Collector
This project was awarded under U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) Program Solicitation DE-PS26-00NT40769 and specifically addresses Technical Topical Area 4 - Testing Novel and Less Mature Control Technologies on Actual Flue Gas at the Pilot Scale. The project team included the Energy & Environmental Research Center (EERC) as the main contractor; W.L. Gore & Associates, Inc., as a technical and financial partner; and the Big Stone Plant operated by Otter Tail Power Company, host for the field-testing portion of the research. Since 1995, DOE has supported development of a new concept in particulate control called the advanced hybrid particulate collector (AHPC). The AHPC has been licensed to W.L. Gore and Associates, Inc., and is marketed as the Advanced Hybrid{trademark} filter by Gore. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a unique configuration, providing major synergism between the two collection methods, both in the particulate collection step and in the transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and it solves the problem of reentrainment and re-collection of dust in conventional baghouses. The AHPC also appears to have unique advantages for mercury control over baghouses or ESPs as an excellent gas-solid contactor. The objective of the original 5-task project was to demonstrate 90% total mercury control in the AHPC at a lower cost than current mercury control estimates. The approach included bench-scale batch tests, larger-scale pilot testing with real flue gas on a coal-fired combustion system, and field demonstration at the 2.5-MW scale at a utility power plant to prove scale-up and demonstrate longer-term mercury control. The scope of work was modified to include an additional sixth task, initiated in April 2003. The objective of this task was to evaluate the mercury capture effectiveness of the AHPC when used with elemental mercury oxidation additives. This project, which is now nearing completion, demonstrated at the pilot-scale level a technology that provides a cost-effective technique to control mercury and, at the same time, greatly enhances fine particulate collection efficiency. The technology can be used to retrofit systems currently employing inefficient ESP technology as well as for new construction, thereby providing a solution for improved fine particulate control combined with effective mercury control for a large segment of the U.S. utility industry as well as other industries
Recommended from our members
Mercuty Control With The Advanced Hybrid Particulate Collector
This project was awarded under U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) Program Solicitation DE-PS26-00NT40769 and specifically addresses Technical Topical Area 4 - Testing Novel and Less Mature Control Technologies on Actual Flue Gas at the Pilot Scale. The project team includes the Energy & Environmental Research Center (EERC) as the main contractor; W.L. Gore & Associates, Inc., as a technical and financial partner; and the Big Stone Plant operated by Otter Tail Power Company, host for the field testing portion of the research. Since 1995, DOE has supported development of a new concept in particulate control called the advanced hybrid particulate collector (AHPC). The AHPC has been licensed to W.L. Gore and Associates, Inc., and is now marketed as the Advanced Hybrid{trademark} filter by Gore. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a unique configuration, providing major synergism between the two collection methods, both in the particulate collection step and in the transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and it solves the problem of reentrainment and re-collection of dust in conventional baghouses. The AHPC appears to have unique advantages for mercury control over baghouses or ESPs as an excellent gas-solid contactor. The objective of the three-task project is to demonstrate 90% total mercury control in the AHPC at a lower cost than current mercury control estimates. The approach includes bench-scale batch testing that ties the new work to previous results and links results with larger-scale pilot testing with real flue gas on a coal-fired combustion system, pilot-scale testing on a coal-fired combustion system with both a pulse-jet baghouse and an AHPC to prove or disprove the research hypotheses, and field demonstration pilot-scale testing at a utility power plant to prove scaleup and demonstrate longer-term mercury control. This project, if successful, will demonstrate at the pilot-scale level a technology that would provide a cost-effective technique to accomplish control of mercury emissions and, at the same time, greatly enhance fine particulate collection efficiency. The technology can be used to retrofit systems currently employing inefficient ESP technology as well as for new construction, thereby providing a solution to a large segment of the U.S. utility industry as well as other industries requiring mercury control
- …