65 research outputs found
Influence of organic films on the evaporation and condensation of water in aerosol
Uncertainties in quantifying the kinetics of evaporation and condensation of water from atmospheric aerosol are a significant contributor to the uncertainty in predicting cloud droplet number and the indirect effect of aerosols on climate. The influence of aerosol particle surface composition, particularly the impact of surface active organic films, on the condensation and evaporation coefficients remains ambiguous. Here, we report measurements of the influence of organic films on the evaporation and condensation of water from aerosol particles. Significant reductions in the evaporation coefficient are shown to result when condensed films are formed by monolayers of long-chain alcohols [C(n)H((2n+1))OH], with the value decreasing from 2.4 × 10(−3) to 1.7 × 10(−5) as n increases from 12 to 17. Temperature-dependent measurements confirm that a condensed film of long-range order must be formed to suppress the evaporation coefficient below 0.05. The condensation of water on a droplet coated in a condensed film is shown to be fast, with strong coherence of the long-chain alcohol molecules leading to islanding as the water droplet grows, opening up broad areas of uncoated surface on which water can condense rapidly. We conclude that multicomponent composition of organic films on the surface of atmospheric aerosol particles is likely to preclude the formation of condensed films and that the kinetics of water condensation during the activation of aerosol to form cloud droplets is likely to remain rapid
Hygroscopic properties of aminium sulfate aerosols
Alkylaminium sulfates originate from the neutralisation reaction between short-chained amines and sulfuric acid and have been detected in atmospheric aerosol particles. Their physicochemical behaviour is less well characterised than their inorganic equivalent, ammonium sulfate, even though they play a role in atmospheric processes such as the nucleation and growth of new particles and cloud droplet formation. In this work, a comparative evaporation kinetics experimental technique using a cylindrical electrodynamic balance is applied to determine the hygroscopic properties of six short-chained alkylaminium sulfates, specifically mono-, di-, and tri-methylaminium sulfate and mono-, di-, and tri-ethyl aminium sulfate. This approach allows for the retrieval of a water-activity-dependent growth curve in less than 10 s, avoiding the uncertainties that can arise from the volatilisation of semi-volatile components. Measurements are made on particles > 5 µm in radius, avoiding the need to correct equilibrium measurements for droplet-surface curvature with assumed values of the droplet-surface tension. Variations in equilibrium solution droplet composition with varying water activity are reported over the range 0.5 to > 0.98, along with accurate parameterisations of solution density and refractive index. The uncertainties in water activities associated with the hygroscopicity measurements are typically 0.9 and ∼ ±1 % below 0.9, with maximum uncertainties in diameter growth factors of ±0.7 %. Comparison with previously reported measurements show deviation across the entire water activity range
Hygroscopic properties of aminium sulfate aerosols
Alkylaminium sulfates originate from the neutralisation reaction between short-chained amines and sulfuric acid and have been detected in atmospheric aerosol particles. Their physicochemical behaviour is less well characterised than their inorganic equivalent, ammonium sulfate, even though they play a role in atmospheric processes such as the nucleation and growth of new particles and cloud droplet formation. In this work, a comparative evaporation kinetics experimental technique using a cylindrical electrodynamic balance is applied to determine the hygroscopic properties of six short-chained alkylaminium sulfates, specifically mono-, di-, and tri-methylaminium sulfate and mono-, di-, and tri-ethyl aminium sulfate. This approach allows for the retrieval of a water-activity-dependent growth curve in less than 10 s, avoiding the uncertainties that can arise from the volatilisation of semi-volatile components. Measurements are made on particles > 5 µm in radius, avoiding the need to correct equilibrium measurements for droplet-surface curvature with assumed values of the droplet-surface tension. Variations in equilibrium solution droplet composition with varying water activity are reported over the range 0.5 to > 0.98, along with accurate parameterisations of solution density and refractive index. The uncertainties in water activities associated with the hygroscopicity measurements are typically 0.9 and ∼ ±1 % below 0.9, with maximum uncertainties in diameter growth factors of ±0.7 %. Comparison with previously reported measurements show deviation across the entire water activity range
Probing the Evaporation Dynamics of Ethanol/Gasoline Biofuel Blends Using Single Droplet Manipulation Techniques
Peer reviewedPublisher PD
Recommended from our members
A purely kinetic description of the evaporation of water droplets
The process of water evaporation, although deeply studied, does not enjoy a kinetic description that captures known physics and can be integrated with other detailed processes such as drying of catalytic membranes embedded in vapor-fed devices and chemical reactions in aerosol whose volumes are changing dynamically. In this work, we present a simple, three-step kinetic model for water evaporation that is based on theory and validated by using well-established thermodynamic models of droplet size as a function of time, temperature, and relative humidity as well as data from time-resolved measurements of evaporating droplet size. The kinetic mechanism for evaporation is a combination of two limiting processes occurring in the highly dynamic liquid-vapor interfacial region: direct first order desorption of a single water molecule and desorption resulting from a local fluctuation, described using third order kinetics. The model reproduces data over a range of relative humidities and temperatures only if the interface that separates bulk water from gas phase water has a finite width, consistent with previous experimental and theoretical studies. The influence of droplet cooling during rapid evaporation on the kinetics is discussed; discrepancies between the various models point to the need for additional experimental data to identify their origin
Effect of crystallization kinetics on the properties of spray dried microparticles
<p>A droplet chain technique was used to study the influence of the crystallization process on the morphology of spray dried microparticles. A piezoceramic dispenser produced a chain of monodisperse solution droplets with an initial diameter in the range of 60–80 µm. Aqueous solutions of sodium nitrate were prepared in concentrations ranging from 5 mg/ml to 5⋅10<sup>−5</sup> mg/ml. The solution droplets were injected into a laminar flow with gas temperatures varying from 25 to 150°C, affecting the droplet temperature and the evaporation rate, accordingly. Dried particles with diameters between 0.3 and 18 µm were collected. The properties of the collected microparticles were studied and correlated with a particle formation model which predicted the onset of saturation and crystallization. The model accounted for the dependence of the diffusion coefficient of sodium nitrate in water on droplet viscosity. The viscosity trend for sodium nitrate solutions was determined by studying the relaxation time observed during coalescence of two aqueous sodium nitrate droplets levitated in optical tweezers. The combination of theoretical derivations and experimental results showed that longer time available for crystallization correlates with larger crystal size and higher degrees of crystallinity in the final microparticles.</p> <p>© 2016 American Association for Aerosol Research</p
Mass Accommodation of Water: Bridging the Gap Between Molecular Dynamics Simulations and Kinetic Condensation Models
The condensational growth of submicrometer aerosol particles to climate relevant sizes is sensitive to their ability to accommodate vapor molecules, which is described by the mass accommodation coefficient. However, the underlying processes are not yet fully understood. We have simulated the mass accommodation and evaporation processes of water using molecular dynamics, and the results are compared to the condensation equations derived from the kinetic gas theory to shed light on the compatibility of the two. Molecular dynamics simulations were performed for a planar TIP4P-Ew water surface at four temperatures in the range 268–300 K as well as two droplets, with radii of 1.92 and 4.14 nm at T = 273.15 K. The evaporation flux from molecular dynamics was found to be in good qualitative agreement with that predicted by the simple kinetic condensation equations. Water droplet growth was also modeled with the kinetic multilayer model KM-GAP of Shiraiwa et al. [ Atmos. Chem. Phys. 2012, 12, 2777]. It was found that, due to the fast transport across the interface, the growth of a pure water droplet is controlled by gas phase diffusion. These facts indicate that the simple kinetic treatment is sufficient in describing pure water condensation and evaporation. The droplet size was found to have minimal effect on the value of the mass accommodation coefficient. The mass accommodation coefficient was found to be unity (within 0.004) for all studied surfaces, which is in agreement with previous simulation work. Additionally, the simulated evaporation fluxes imply that the evaporation coefficient is also unity. Comparing the evaporation rates of the mass accommodation and evaporation simulations indicated that the high collision flux, corresponding to high supersaturation, present in typical molecular dynamics mass accommodation simulations can under certain conditions lead to an increase in the evaporation rate. Consequently, in such situations the mass accommodation coefficient can be overestimated, but in the present cases the corrected values were still close to unity with the lowest value at ≈0.99
The influence of the surface composition of mixed monolayer films on the evaporation coefficient of water
Variabilities and uncertainties in characterising water transport kinetics in glassy and ultraviscous aerosol
A comprehensive assessment of the accuracy with which water transport in viscous aerosol can be measured and predicted is provided.</p
- …