Wind tunnel performance of four energy efficient propellers designed for Mach 0.8 cruise

Several advanced aerodynamic and acoustic concepts were investigated in recent wind tunnel tests performed in the NASA-Lewis Research Center 8x6 foot wind tunnel. These concepts included aerodynamically integrated propeller/nacelles, area-ruling, blade sweep, reduced blade thickness, and power (disk) loadings several times higher than conventional designs. Four eight-bladed propeller models were tested to determine aerodynamic performance. Relative noise measurements were made on three of the models at cruise conditions. Three of the models were designed with swept blades and one with straight blades. At the design Mach number of 0.8, power coefficient of 1.7, and advance ratio of 3.06, the straight bladed model had the lowest net efficiency of 75.8 percent. Increasing the sweep to 30 deg improved the performance to near 77 percent. Installation of an area-ruled spinner on a 30 deg sweep model further improved the efficiency to about 78 percent. The model with the highest blade sweep (45 deg) and an area-ruled spinner had the highest net efficiency of 78.7 percent, and at lower power loadings the efficiency exceeded 80 percent. At lower Mach numbers the 30 deg swept model had the highest efficiency. Values near 81 percent were obtained for the design loading at speeds to Mach 0.7. Relative noise measurements indicated that the acoustically designed 45 deg sweep model reduced the near field cruise noise by between 5 and 6 dB

Design and performance of energy efficient propellers for Mach 0.8 cruise

The increased emphasis on fuel conservation in the world has stimulated a series of studies of both conventional and unconventional propulsion systems for commercial aircraft. Preliminary results from these studies indicate that a fuel saving of 14 to 40 percent may be realized by the use of an advanced high-speed turboprop. This turboprop must be capable of high efficiency at Mach 0.8 cruise above 9.144 km altitude if it is to compete with turbofan powered commercial aircraft. Several advanced aerodynamic concepts were investigated in recent wind tunnel tests under NASA sponsorship on two propeller models. These concepts included aerodynamically integrated propeller/nacelles, area ruling, blade sweep, reduced blade thickness and power (disk) loadings several times higher than conventional designs. The aerodynamic design methodology for these models is discussed. In addition, some of the preliminary test results are presented which indicate that propeller net efficiencies near 80 percent were obtained for high disk loading propellers operating at Mach 0.8

Utilizing a Combined Approach to Assess the Antimicrobial Efficacy of Peracetic Acid on Chicken Thighs and Beef Trim

Antimicrobial interventions are widely utilized in the meat and poultry industry as a way to reduce foodborne pathogens; however, little is known about their overall impact on the microbiota. The objective of this study was to evaluate the impact of peracetic acid (PAA), when used as a short-duration antimicrobial spray, on the pathogen load and microbiota of inoculated chicken thighs and beef trim. Thighs were inoculated with a cocktail of Salmonella spp. and Campylobacter jejuni and trim with a cocktail of Salmonella spp. and Shiga toxin-producing Escherichia coli (E. coli). Inoculated thighs and trim were either not treated (NT) or independently sprayed in a modified spray cabinet with one of the following treatments: 0, 200, 400, and 800 ppm PAA. Samples were rinsed and subsequently used for pathogen detection and microbiota analyses. Pathogens were enumerated by spread plating on selective media, and genomic DNA was extracted for 16S rRNA gene sequencing. Pathogen data were analyzed using ANOVA and linear regression, with means separated by Tukey’s Protected honestly significant differences (HSD; P≤0.05). Microbiota data were analyzed using the QIIME2 pipeline, with data considered significant at P≤0.05 for main effects and Q≤0.05 for pairwise differences. Results from this study demonstrate that a spray, with and without PAA, effectively lowered the level of pathogens compared to NT (P<0.05). Increasing PAA concentrations resulted in lower levels of Salmonella and Campylobacter on thighs (P<0.05, R2=0.44 and 0.55) and Salmonella and E. coli on trim (P<0.05, R2=0.18 and 0.17). The microbiota remained mostly unchanged, with pairwise differences being observed between 0 and 400 ppm and 0 and 800 ppm (P<0.05 Q<0.05) on the β-diversity metric Bray Curtis. The application of PAA as a short-duration antimicrobial spray is an effective intervention strategy to reduce pathogen load; however, efficacy may vary between meat product and target pathogen

High real-space resolution measurement of the local structure of Ga_1-xIn_xAs using x-ray diffraction

High real-space resolution atomic pair distribution functions (PDF)s from the alloy series Ga_1-xIn_xAs have been obtained using high-energy x-ray diffraction. The first peak in the PDF is resolved as a doublet due to the presence of two nearest neighbor bond lengths, Ga-As and In-As, as previously observed using XAFS. The widths of nearest, and higher, neighbor pairs are analyzed by separating the strain broadening from the thermal motion. The strain broadening is five times larger for distant atomic neighbors as compared to nearest neighbors. The results are in agreement with model calculations.Comment: 4 pages, 5 figure

Local structure study of In_xGa_(1-x)As semiconductor alloys using High Energy Synchrotron X-ray Diffraction

Nearest and higher neighbor distances as well as bond length distributions (static and thermal) of the In_xGa_(1-x)As (0<x<1) semiconductor alloys have been obtained from high real-space resolution atomic pair distribution functions (PDFs). Using this structural information, we modeled the local atomic displacements in In_xGa_(1-x)As alloys. From a supercell model based on the Kirkwood potential, we obtained 3-D As and (In,Ga) ensemble averaged probability distributions. This clearly shows that As atom displacements are highly directional and can be represented as a combination of and displacements. Examination of the Kirkwood model indicates that the standard deviation (sigma) of the static disorder on the (In,Ga) sublattice is around 60% of the value on the As sublattice and the (In,Ga) atomic displacements are much more isotropic than those on the As sublattice. The single crystal diffuse scattering calculated from the Kirkwood model shows that atomic displacements are most strongly correlated along directions.Comment: 10 pages, 12 figure

Heterostructures for High Performance Devices

Contains table of contents for Part I, table of contents for Section 1, an introduction, reports on sixteen research projects and a list of publications.DARPA/NCIPTJoint Services Electronics Program Contract DAAL03-92-C-0001National Science FoundationToshiba Corporation Ltd.Charles S. Draper LaboratoriesHertz Foundation FellowshipVitesse SemiconductorGTE LaboratoriesNational Science Foundation FellowshipDARPA/MOSISTexas Instruments, Inc.U.S. Army Research Office Grant DAAL03-92-G-025

Heterostructures for High Performance Devices

Contains table of contents for Part I, table of contents for Section 1, an introduction, reports on eighteen research projects and a list of publications.Charles S. Draper Laboratories Contract DL-H-418483DARPA/NCIPTJoint Services Electronics Program Contract DAAL03-89-C-0001Joint Services Electronics Program Contract DAAL03-92-C-0001IBM Corporation FellowshipNational Science Foundation FellowshipVitesse SemiconductorGTE LaboratoriesCharles S. Draper LaboratoriesElectronics and Telecommunications Research Institute (ETRI) FellowshipNational Science Foundation/Northeastern UniversityTRW SystemsU.S. Army Research OfficeNational Science FoundationAT&T Bell Laboratories FellowshipNational Science Foundation Grant ECS 90-0774

Emissões públicas de ações, volatilidade e insider information na Bovespa

O trabalho utiliza um estudo de evento para examinar os retornos de ações relacionados a emissões públicas por empresas brasileiras listadas na BOVESPA, realizadas entre 1992 e 2002, buscando determinar como o mercado reagiu antes, durante e depois da data do anúncio da emissão. Após utilizar a metodologia convencional de mensuração de retornos anormais por OLS, foram utilizados modelos ARCH e GARCH, que levam em consideração a heteroscedasticidade condicional da volatilidade dos retornos anormais, em mais de 70% da amostra, após a constatação da presença desses processos nos resíduos originais. Os resultados mostram que 1) há evidências de insider information antes da data do anúncio, (2) que ocorrem retornos anormais negativos na data do anúncio e (3) que, no período de um ano após as emissões, as ações das empresas que captaram recursos via underwriting tiveram retornos negativos após ajuste ao risco e ao mercado