2,630 research outputs found
Anodization study of epitaxial graphene:insights on the oxygen evolution reaction of graphitic materials
The photoemission electron microscopy and x-ray photoemission spectroscopy were utilized for the study of anodized epitaxial graphene (EG) on silicon carbide as a fundamental aspect of the oxygen evolution reaction on graphitic materials. The high-resolution analysis of surface morphology and composition quantified the material transformation during the anodization. We investigated the surface with lateral resolution amp;lt;150 nm, revealing significant transformations on the EG and the role of multilayer edges in increasing the film capacitance.Funding Agencies| [EP/K035746/1]; [EP/M000605/1]</p
New data on the granite pedestal of the monument to Peter the Great “The Bronze Horseman” in Saint Petersburg
In order to expand and popularize knowledge about the stone decoration of Saint Petersburg, we present new data on the mineralogy and petrography of the famous Thunder-Stone, the parts of which were the basis for the monument to Peter the Great – the legendary “Bronze Horseman”. In the course of studying geological documentation of the monument's granite base, we examined the mineral composition and internal structure of granite, as well as the fragments of a pegmatite vein and veinlets found in it. 25 single-mineral samples were collected from the available micro-scaled shear fractures within the pedestal surface and studied by electron microscopy, electron probe and X-ray phase analysis. It was established that K-Na feldspar in the granite composition was represented by microcline, whereas micas were represented by annite-siderophyllite and muscovite. Accessory minerals included monazite, xenotime, thorite, zircon, rutile, apatite, fluorite, Ti-, Nb-, Ta-bearing minerals, uranium phosphates. The presence of topaz is characteristic of pegmatites. The revealed structural and textural features of four granite boulders in the monument pedestal, as well as mineralogical and chemical composition of their rock-forming and accessory minerals, showed the similarity of this rock to Precambrian biotite-muscovite granites and topaz-containing pegmatites (stockscheiders) of the late formation phase of the Vyborg rapakivi granite massif. The research results are considered as the basis for further geological and mineralogical study of the Thunder-Stone origin and determining the place of its separation from the primary source
The Strength of Masonry Based on the Deformation Characteristics of Its Components
The chapter presents a new approach to determining the strength of masonry reinforced with transverse meshes in mortar joints. The method consists of using the values of the modulus of elasticity and limiting deformations of the stone material, mortar for joints, and both steel and composite reinforcements. An analytical notation is proposed that integrally takes into account the characteristics of the initial materials. The results of physical tests of centrally loaded masonry pillars reinforced with steel and composite meshes are given. To test the masonry, widely used materials were used: solid brick and cement-sand mortar. The values of the bearing capacity, deformations, and internal stresses of the masonry are obtained. It is determined that the stresses in the reinforcing bars of the meshes are unevenly distributed in the horizontal plane of the mortar joint and amount to 20–37% of the design resistance of the mesh material. The strength of masonry reinforced with composite meshes is 65–75% of steel of the same cross section. It is shown that there is a good convergence of test results with the presented analytical dependence
Proposal for photoacoustic ultrasonic generator based on Tamm plasmon structures
The scheme of generation of ultrasound waves based on optically excited Tamm
plasmon structures is proposed. It is shown that Tamm plasmon structures can
provide total absorption of a laser pulse with arbitrary wavelength in a
metallic layer providing the possibility of the use of an infrared
semiconductor laser for the excitation of ultrasound waves. Laser pulse
absorption, heat transfer and dynamical properties of the structure are
modeled, and the optimal design of the structure is found. It is demonstrated
that the Tamm plasmon-based photoacoustic generator can emit ultrasound waves
in the frequency band up to 100 MHz with pre-defined frequency spectrum.
Optical power to sound power conversion efficiency grows linearly with
frequency of the laser modulation and excitation power
Recommended from our members
The electronic structure and the nature of the chemical bond in CeO2.
The X-ray photoelectron spectral structure of CeO2 valence electrons in the binding energy range of 0 to ∼50 eV was analyzed. The core-electron spectral structure parameters and the results of relativistic discrete-variational calculations of CeO8 and Ce63O216 clusters were taken into account. Comparison of the valence and the core-electron spectral structures showed that the formation of the inner (IVMO) and the outer (OVMO) valence molecular orbitals contributes to the spectral structure more than the many-body processes. The Ce 4f electrons were established to participate directly in chemical bond formation in CeO2 losing partially their f character. They were found to be localized mostly within the outer valence band. The Ce 5p atomic orbitals were shown to participate in the formation of both the inner and the outer valence molecular orbitals (MOs). A large part in the IVMO formation is taken by the filled Ce 5p1/2, 5p3/2 and O 2s atomic shells, while the Ce 5s electrons participate weakly in the chemical bond formation. The composition and the sequent order of the molecular orbitals in the binding energy range of 0 to ∼50 eV were established. A quantitative scheme for the molecular orbitals of CeO2 was built. This scheme is fundamental for understanding the nature of chemical bonding and also for the interpretation of other X-ray spectra of CeO2. Evaluations revealed that the IVMO electrons weaken the chemical bond formed by the OVMO electrons by 37%.The work was supported by the RFBR grant № 17-03-00277a. M.V. Ryzhkov acknowledges financial support of FASO of Russia ISSC of the Ural Branch of RAS № AAAA-A16-116122810214-9. A.J. Popel acknowledges funding from the UK EPSRC (grant EP/I036400/1) and Radioactive Waste Management Ltd (formerly the Radioactive Waste Management Directorate of the UK Nuclear Decommissioning Authority, contract NPO004411A-EPS02), a maintenance grant from the Russian Foundation for Basic Research (projects 13-03-90916) and CSAR bursary
Variability and Reliability of Graphene Field-Effect Transistors with CaF2 Insulators
Graphene is a promising material for applications as a channel in graphene
field-effect transistors (GFETs) which may be used as a building block for
optoelectronics, high-frequency devices and sensors. However, these devices
require gate insulators which ideally should form atomically flat interfaces
with graphene and at the same time contain small densities of traps to maintain
high device stability. Previously used amorphous oxides, such as SiO2 and
Al2O3, however, typically suffer from oxide dangling bonds at the interface,
high surface roughness and numerous border oxide traps. In order to address
these challenges, here we use for the first time 2nm thick epitaxial CaF2 as a
gate insulator in GFETs. By analyzing device-to-device variability for over 200
devices fabricated in two batches, we find that tens of them show similar gate
transfer characteristics. Our statistical analysis of the hysteresis up to 175C
has revealed that while an ambient-sensitive counterclockwise hysteresis can be
present in some devices, the dominant mechanism is thermally activated charge
trapping by border defects in CaF2 which results in the conventional clockwise
hysteresis. We demonstrate that both the hysteresis and bias-temperature
instabilities in our GFETs with CaF2 are comparable to similar devices with
SiO2 and Al2O3. In particular, we achieve a small hysteresis below 0.01 V for
equivalent oxide thickness (EOT) of about 1 nm at the electric fields up to 15
MV/cm and sweep times in the kilosecond range. Thus, our results demonstrate
that crystalline CaF2 is a promising insulator for highly-stable GFETs
bis-Nitrile and bis-Dialkylcyanamide Platinum(II) Complexes as Efficient Catalysts for Hydrosilylation Cross-Linking of Siloxane Polymers
cis- and trans-Isomers of the platinum(II) nitrile complexes [PtCl2(NCR)2] (R = NMe2,
N(C5H10), Ph, CH2Ph) were examined as catalysts for hydrosilylation cross-linking of vinyl-terminated
polydimethylsiloxane and trimethylsilyl-terminated poly(dimethylsiloxane-co-ethylhydrosiloxane)
producing high quality silicone rubbers. Among the tested platinum species the cis-complexes
are much more active catalysts than their trans-congeners and for all studied platinum complexes
cis-[PtCl2(NCCH2Ph)2] exhibits the best catalytic activity (room temperature, c = 1.0 10 4 mol/L,
pot-life 60 min, curing 6 h). Although cis-[PtCl2(NCCH2Ph)2] is less active than the widely used
Karstedt’s catalyst, its application for the cross-linking can be performed not only at room temperature
(c = 1.0 10 4 mol/L), but also, more efficiently, at 80 C (c = 1.0 10 4–1.0 10 5 mol/L) and
it prevents adherence of the formed silicone rubbers to equipment. The usage of the cis- and
trans-[PtCl2(NCR)2] complexes as the hydrosilylation catalysts do not require any inhibitors and,
moreover, the complexes and their mixtures with vinyl- and trimethylsilyl terminated polysiloxanes
are shelf-stable in air. Tested catalysts do not form colloid platinum particles after the cross-linking.This project was supported by Federal Target Program (grant 14.576.21.0028).
Andrey V. Vlasov and Vadim Yu. Kukushkin are much obliged to Saint Petersburg State University for a
postdoctoral fellowship (12.50.1188.2014) and research grant (12.38.225.2014), correspondingly. The authors also express their gratitude to the Center of Thermal Analysis and Calorimetry (Saint Petersburg State University) for physicochemical measurements
Ocean-bottom seismographs based on broadband MET sensors: architecture and deployment case study in the Arctic
The Arctic seas are now of particular interest due to their prospects in terms of hydrocarbon extraction, development of marine transport routes, etc. Thus, various geohazards, including those related to seismicity, require detailed studies, especially by instrumental methods. This paper is devoted to the ocean-bottom seismographs (OBS) based on broadband molecular–electronic transfer (MET) sensors and a deployment case study in the Laptev Sea. The purpose of the study is to introduce the architecture of several modifications of OBS and to demonstrate their applicability in solving different tasks in the framework of seismic hazard assessment for the Arctic seas. To do this, we used the first results of several pilot deployments of the OBS developed by Shirshov Institute of Oceanology of the Russian Academy of Sciences (IO RAS) and IP Ilyinskiy A.D. in the Laptev Sea that took place in 2018–2020. We highlighted various seismological applications of OBS based on broadband MET sensors CME-4311 (60 s) and CME-4111 (120 s), including the analysis of ambient seismic noise, registering the signals of large remote earthquakes and weak local microearthquakes, and the instrumental approach of the site response assessment. The main characteristics of the broadband MET sensors and OBS architectures turned out to be suitable for obtaining high-quality OBS records under the Arctic conditions to solve seismological problems. In addition, the obtained case study results showed the prospects in a broader context, such as the possible influence of the seismotectonic factor on the bottom-up thawing of subsea permafrost and massive methane release, probably from decaying hydrates and deep geological sources. The described OBS will be actively used in further Arctic expeditions
- …