Breaking the Resolution limit in Photoacoustic Imaging using Positivity and Sparsity

In this tutorial, we aim to directly recreate some of our "aha" moments when exploring the impact of heat diffusion on the spatial resolution limit of photothermal imaging. Our objective is also to communicate how this physical limit can nevertheless be overcome and include some concrete technological applications. Describing diffusion as a random walk, one insight is that such a stochastic process involves not only a Gaussian spread of the mean values in space, with the variance proportional to the diffusion time, but also temporal and spatial fluctuations around these mean values. All these fluctuations strongly influence the image reconstruction immediately after the short heating pulse. The Gaussian spread of the mean values in space increases the entropy, while the fluctuations lead to a loss of information that blurs the reconstruction of the initial temperature distribution and can be described mathematically by a spatial convolution with a Gaussian thermal point-spread-function (PSF). The information loss turns out to be equal to the mean entropy increase and limits the spatial resolution proportional to the depth of the imaged subsurface structures. This principal resolution limit can only be overcome by including additional information such as sparsity or positivity. Prior information can be also included by using a deep neural network with a finite degrees of freedom and trained on a specific class of image examples for image reconstructio

Imaging of a patterned and buried molecular layer by coherent acoustic phonon spectroscopy

A molecular layer of aminopropyltriethoxysilane is patterned with a focused ion beam and subsequently covered by a gold film. The gold-polymer-substrate structures are afterwards imaged by ultrafast coherent acoustic phonon spectroscopy in reflection geometry. We demonstrate that the lateral structure of the covered polymer layer can be detected via the damping time of the vibrational mode of the gold film. Furthermore, we utilize Brillouin oscillations originating from the silicon substrate to map the structures and to estimate the molecular layer thickness.Fil: Hettich, Mike . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Jacob, Karl . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Ristow, Oliver . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: He, Chuan . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Mayer, Jan . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Schubert, Martin . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Gusev, Vitalyi . Centre National de la Recherche Scientifique; FranciaFil: Bruchhausen, Axel Emerico. University of Konstanz. Department of Physics and Center for Applied Photonics; Alemania. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina. Comisión Nacional de Energía Atómica. Gerencia del Area de Energía Nuclear. Instituto Balseiro; ArgentinaFil: Dekorsy, Thomas . University of Konstanz. Department of Physics and Center for Applied Photonics; Alemani

Spatial-temporally resolved high-frequency surface acoustic waves on silicon investigated by femtosecond spectroscopy

Various types of surface acoustic waves are generated by femtosecond pulses on bulk silicon with aluminium stripe transducers. Rayleigh and leaky longitudinal surface acoustic wave modes are detected in the time domain for various propagation distances. The modes are identified by measuring on various pitches and comparing the spectra with finite element calculations. The lifetimes of the modes are determined quantitatively by spatially separating pump and probe beam, showing a significant difference in the lifetimes of both modes. We were able to excite and measure Rayleigh modes with frequencies of up to 90 GHz using a 100 nm period grating.Fil: Schubert, Martin . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Grossmann, Martin . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Ristow, Oliver . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Hettich, Mike . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Bruchhausen, Axel Emerico. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche); Argentina. Comisión Nacional de Energía Atómica. Gerencia del Area de Energía Nuclear. Instituto Balseiro; ArgentinaFil: Barretto, Elaine C. S. . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Scheer, Elke . University of Konstanz. Department of Physics and Center for Applied Photonics; AlemaniaFil: Gusev, Vitalyi . Université du Maine; Francia. Centre National de la Recherche Scientifique; FranciaFil: Dekorsy, Thomas . University of Konstanz. Department of Physics and Center for Applied Photonics; Alemani

Picosecond ultrasonics with a free-running dual-comb laser

We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements. The ultrasonic signatures in a semiconductor multi-quantum-well structure originating from the quantum wells and superlattice regions are revealed and discussed. We further demonstrate ultrasonic measurements on a thin-film metalized sample and compare these measurements to ones obtained with a pair of locked femtosecond lasers. Our data show that a free-running dual-comb laser is well-suited for picosecond ultrasonic measurements and thus it offers a significant reduction in complexity and cost for this widely adopted non-destructive testing techniqu

Guiding of elastic waves in a two-dimensional graded phononic crystal plate

The guiding of elastic waves in a two-dimensional graded phononic crystal plate is investigated. This effect is induced by the resonance coupling of attachments and matrix in a silicon pillar-substrate system and the resonance frequencies of guided surface modes can be tuned by tailoring the geometry and material properties of the pillars. The resonance frequencies increase with radius and Young’s modulus, and decrease with height and density of the pillars, which provides several possibilities for the guiding of elastic waves. These devices show the capability of spatially selecting different frequencies into designed channels, thus acting as a phononic multi-channel filter

Topological guiding of elastic waves in phononic metamaterials based on 2D pentamode structures

A topological state with protected propagation of elastic waves is achieved by appropriately engineering a phononic metamaterial based on 2D pentamode structures in silicon. Gapless edge states in the designed structure, which are characterized by pseudospin-dependent transport, provide backscattering-immune propagation of the elastic wave along bend paths. The role of the states responsible for forward and backward transfer can be interchanged by design

Picosecond Photoacoustic Metrology of SiO2 and LiNbO3 Layer Systems Used for High Frequency Surface-Acoustic-Wave Filters

Many applications of thin films necessitate detailed information about their thicknesses and sound velocities. Here, we study SiO2/LiNbO3 layer systems by picosecond photoacoustic metrology and measure the sound velocities of the respective layers and the film thickness of SiO2, which pose crucial information for the fabrication of surface-acoustic-wave filters for communication technology. Additionally, we utilize the birefringence and the accompanying change in the detection sensitivity of coherent acoustic phonons in the LiNbO3 layer to infer information about the LiNbO3 orientation and the layer interface

All optical control of comb-like coherent acoustic phonons in multiple quantum well structures through double-pump-pulse pump-probe experiments

We present an advancement in applications of ultrafast optics in picosecond laser ultrasonics - laser-induced comb-like coherent acoustic phonons are optically controlled in a In0.27Ga0.73As/GaAs multiple quantum well (MQW) structure by a high-speed asynchronous optical sampling (ASOPS) system based on two GHz Yb:KYW lasers. Two successive pulses from the same pump laser are used to excite the MQW structure. The second pump light pulse has a tunable time delay with respect to the first one and can be also tuned in intensity, which enables the amplitude and phase modulation of acoustic phonons. This yields rich temporal acoustic patterns with suppressed or enhanced amplitudes, various wave-packet shapes, varied wave-packet widths, reduced wave-packet periods and varied phase shifts of single-period oscillations within a wave-packet. In the frequency domain, the amplitude and phase shift of the individual comb component present a second-pump-delay-dependent cosine-wave-like and sawtooth-wave-like variation, respectively, with a modulation frequency equal to the comb component frequency itself. The variations of the individual component amplitude and phase shift by tuning the second pump intensity exhibit an amplitude valley and an abrupt phase jump at the ratio around 1:1 of the two pump pulse intensities for certain time delays. A simplified model, where both generation and detection functions are assumed as a cosine stress wave enveloped by Gaussian or rectangular shapes in an infinite periodic MQW structure, is developed in order to interpret acoustic manipulation in the MQW sample. The modelling agrees well with the experiment in a wide range of time delays and intensity ratios. Moreover, by applying a heuristic-analytical approach and nonlinear corrections, the improved calculations reach an excellent agreement with experimental results and thus enable to predict and synthesize coherent acoustic wave patterns in MQW structures