9,220 research outputs found
Comparison of hot wire/laser velocimeter turbulence intensity measurements
The question of whether a random measure of particle velocities yields a good statistical estimate of the stationary condition of the turbulence flow field was investigated by comparing hot-wire and laser velocimeter turbulence intensity measurements. Great care was taken to insure that the instrument precision of both the laser velocimeter and hot wire was maximized. In this attempt to reduce the measurement uncertainties in the hot wire, direct digitization of the analog output signal was performed with point-by-point conversion to velocity through a spline fit calibration curve and the turbulence intensity function was calculated statistically. Frequent calibrations of the hot wire were performed using the laser velocimeter as the velocity standard to account for the presence of the small seed particles in the air flow and signal drift in the hot wire
A framework to assess the quality and robustness of LES codes
We present a framework which can be used to rigourously assess and compare large-eddy simulation methods. We apply this to LES of homogeneous isotropic turbulence using three different discretizations and a Smagorinsky model. By systematically varying the simulation resolution and the Smagorinsky coefficient, one can determine parameter regions for which one, two or multiple flow predictions are simultaneously predicted with minimal error. To this end errors on the predicted longitudinal integral length scale, the resolved kinetic energy and the resolved enstrophy are considered. Parameter regions where all considered errors are simultaneously (nearly) minimal are entitled ‘multi-objective optimal’ parameter regions. Surprisingly, we find that a standard second-order method has a larger ‘multiobjective optimal’ parameter region than two considered fourth order methods. Moreover, the errors in the respective ‘multi-objective optimal’ regions are also lowest for the second-order scheme
Organic Matter Accumulation, Sulfate Reduction, and Methanogenesis in Pliocene–Pleistocene Turbidites on the Iberia Abyssal Plain
Correlation of laser velocimeter measurements over a wing with results of two prediction techniques
The flow field at the center line of an unswept wing with an aspect ratio of eight was determined using a two dimensional viscous flow prediction technique for the flow field calculation, and a three dimensional potential flow panel method to evaluate the degree of two dimensionality achieved at the wing center line. The analysis was made to provide an acceptable reference for comparison with velocity measurements obtained from a fringe type laser velocimeter optics systems operating in the backscatter mode in the Langley V/STOL tunnel. Good agreement between laser velocimeter measurements and theoretical results indicate that both methods provide a true representation of the velocity field about the wing at angles of attack of 0.6 and 4.75 deg
Laser velocimetry technique applied to the Langley 0.3 meter transonic cryogenic tunnel
A low power laser velocimeter operating in the forward scatter mode was used to measure free stream mean velocities in the Langley 0.3 Meter Transonic Cryogenic Tunnel. Velocity ranging from 51 to 235 m/s was measured. Measurements were obtained for a variety of nominal tunnel conditions: Mach numbers from 0.20 to 0.77, total temperatures from 100 to 250 K, and pressures from 101 to 152 kPa. Particles were not injected to augment the existing Mie scattering materials. Liquid nitrogen droplets were the existing liqht scattering material. Tunnel vibrations and thermal effects had no detrimental effects on the optical system
Optimal model parameters for multi-objective large-eddy simulations
A methodology is proposed for the assessment of error dynamics in large-eddy simulations. It is demonstrated that the optimization of model parameters with respect to one flow property can be obtained at the expense of the accuracy with which other flow properties are predicted. Therefore, an approach is introduced which allows to assess the total errors based on various flow properties simultaneously. We show that parameter settings exist, for which all monitored errors are "near optimal," and refer to such regions as "multi-objective optimal parameter regions." We focus on multi-objective errors that are obtained from weighted spectra, emphasizing both large- as well small-scale errors. These multi-objective optimal parameter regions depend strongly on the simulation Reynolds number and the resolution. At too coarse resolutions, no multi-objective optimal regions might exist as not all error-components might simultaneously be sufficiently small. The identification of multi-objective optimal parameter regions can be adopted to effectively compare different subgrid models. A comparison between large-eddy simulations using the Lilly-Smagorinsky model, the dynamic Smagorinsky model and a new Re-consistent eddy-viscosity model is made, which illustrates this. Based on the new methodology for error assessment the latter model is found to be the most accurate and robust among the selected subgrid models, in combination with the finite volume discretization used in the present study
Parameter-Free Symmetry-Preserving Regularization Modelling of Turbulent Natural Convection Flows
- …