Evolution of the Cancer Registrar in the Era of Informatics

The cancer registrar reports accurate, complete, and timely abstracted cancer data to various healthcare agencies. The data are used for understanding the incidence of cancer, evaluating the effectiveness of public health efforts in the prevention of new cases and improving patient care outcomes and survival. There are increasing demands placed on registrars for additional data points with real-time submission to reporting agencies. To that end, registrars are increasing the use of informatics to meet the demand. The purpose of this article is the role of the registrar in the collection and reporting of critical cancer data and how registrars are currently using informatics to enhance their work. This article describes how informatics can be leveraged in the future and how registrars play a vital role in meeting the increasing demands placed on them to provide timely, meaningful, and accurate data for the cancer community

Initial Medical Attention on Patients with Early-Stage Non-Small Cell Lung Cancer

Detection of early stage non-small cell lung cancer (NSCLC) is commonly believed to be incidental. Understanding the reasons that caused initial detection of these patients is important for early diagnosis. However, these reasons are not well studied.We retrospectively reviewed medical records of patients diagnosed with stage I or II NSCLC between 2000 and 2009 at UT MD Anderson Cancer Center. Information on suggestive LC-symptoms or other reasons that caused detection were extracted from patients' medical records. We applied univariate and multivariate analyses to evaluate the association of suggestive LC-symptoms with tumor size and patient survival.Of the 1396 early stage LC patients, 733 (52.5%) presented with suggestive LC-symptoms as chief complaint. 347 (24.9%) and 287 (20.6%) were diagnosed because of regular check-ups and evaluations for other diseases, respectively. The proportion of suggestive LC-symptom-caused detection had a linear relationship with the tumor size (correlation 0.96; with p<.0001). After age, gender, race, smoking status, therapy, and stage adjustment, the symptom-caused detection showed no significant difference in overall and LC-specific survival when compared with the other (non-symptom-caused) detection.Symptoms suggestive of LC are the number one reason that led to detection in early NSCLC. They were also associated with tumor size at diagnosis, suggesting early stage LC patients are developing symptoms. Presence of symptoms in early stages did not compromise survival. A symptom-based alerting system or guidelines may be worth of further study to benefit NSCLC high risk individuals

Surface expression of secretory component and HLA class II DR antigen on glandular epithelial cells from human endometrium and two endometrial adenocarcinoma cell lines

The expression of secretory component (SC) by human glandular endometrial cells cultured in vitro was significantly increased by estradiol in the medium. Interferon-gamma and interleukin-4 stimulated the expression of SC only in the presence of estrogen. Tumor necrosis factor-alpha plus estrogen also caused a significant increase in the number of cells expressing SC. HLA class II antigen DR was detected on few glandular epithelial cells of human endometrium cultured in control medium, whereas interferon-gamma and interleukin-4, but not tumor necrosis factor-alpha, caused significant increases in the expression of DR. Estrogen in the culture medium did not significantly affect DR expression. The human endometrial adenocarcinoma cell lines, HEC and RL-95, expressed SC in approximately 50 and 20% of the cells. Also, approximately 20% of the RL-95 cells stained for DR antigen. Interferon-gamma did not influence the degree of expression of either surface marker of the two cell lines. Cells of both lines bound polymeric IgA and IgM but showed little to no binding of monomeric IgA, IgG, or an IgM previously shown not to bind SC.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44844/1/10875_2004_Article_BF00919384.pd

Shattered pellet injection experiments at JET in support of the ITER disruption mitigation system design

A series of experiments have been executed at JET to assess the efficacy of the newly installed shattered pellet injection (SPI) system in mitigating the effects of disruptions. Issues, important for the ITER disruption mitigation system, such as thermal load mitigation, avoidance of runaway electron (RE) formation, radiation asymmetries during thermal quench mitigation, electromagnetic load control and RE energy dissipation have been addressed over a large parameter range. The efficiency of the mitigation has been examined for the various SPI injection strategies. The paper summarises the results from these JET SPI experiments and discusses their implications for the ITER disruption mitigation scheme

Testing a prediction model for the H-mode density pedestal against JET-ILW pedestals

The neutral ionisation model proposed by Groebner et al (2002 Phys. Plasmas 9 2134) to determine the plasma density profile in the H-mode pedestal, is extended to include charge exchange processes in the pedestal stimulated by the ideas of Mahdavi et al (2003 Phys. Plasmas 10 3984). The model is then tested against JET H-mode pedestal data, both in a 'standalone' version using experimental temperature profiles and also by incorporating it in the Europed version of EPED. The model is able to predict the density pedestal over a wide range of conditions with good accuracy. It is also able to predict the experimentally observed isotope effect on the density pedestal that eludes simpler neutral ionization models

Comparing pedestal structure in JET-ILW H-mode plasmas with a model for stiff ETG turbulent heat transport

A predictive model for the electron temperature profile of the H-mode pedestal is described, and its results are compared with the pedestal structure of JET-ILW plasmas. The model is based on a scaling for the gyro-Bohm normalized, turbulent electron heat flux qe/qe,gB resulting from electron temperature gradient (ETG) turbulence, derived from results of nonlinear gyrokinetic (GK) calculations for the steep gradient region. By using the local temperature gradient scale length L-Te in the normalization, the dependence of q(e)/q(e,g)B on the normalized gradients R/L-Te and R/(Lne) can be represented by a unified scaling with the parameter eta(e) = L-ne/L-Te, to which the linear stability of ETG turbulence is sensitive when the density gradient is sufficiently steep. For a prescribed density profile, the value of R/L-Te determined from this scaling, required to maintain a constant electron heat flux qe across the pedestal, is used to calculate the temperature profile. Reasonable agreement with measurements is found for different cases, the model providing an explanation of the relative widths and shifts of the T-e and n(e) profiles, as well as highlighting the importance of the separatrix boundary conditions. Other cases showing disagreement indicate conditions where other branches of turbulence might dominate.This article is part of a discussion meeting issue "H-mode transition and pedestal studies in fusion plasmas'

The role of ETG modes in JET-ILW pedestals with varying levels of power and fuelling

We present the results of GENE gyrokinetic calculations based on a series of JET-ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET-ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients (omega(T)(e)) and normalised density gradients (omega(ne )) around their experimental values, we demonstrate that it is the ratio of these two quantities eta(e) = omega(Te)/omega(ne) that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as eta(e) increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in omega(Te) produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L-Te, it follows a linear trend in correspondence with previous work by different authors

Spectroscopic camera analysis of the roles of molecularly assisted reaction chains during detachment in JET L-mode plasmas

The roles of the molecularly assisted ionization (MAI), recombination (MAR) and dissociation (MAD) reaction chains with respect to the purely atomic ionization and recombination processes were studied experimentally during detachment in low-confinement mode (L-mode) plasmas in JET with the help of experimentally inferred divertor plasma and neutral conditions, extracted previously from filtered camera observations of deuterium Balmer emission, and the reaction coefficients provided by the ADAS, AMJUEL and H2VIBR atomic and molecular databases. The direct contribution of MAI and MAR in the outer divertor particle balance was found to be inferior to the electron-atom ionization (EAI) and electron-ion recombination (EIR). Near the outer strike point, a strong atom source due to the D+2-driven MAD was, however, observed to correlate with the onset of detachment at outer strike point temperatures of Te,osp = 0.9-2.0 eV via increased plasma-neutral interactions before the increasing dominance of EIR at Te,osp &lt; 0.9 eV, followed by increasing degree of detachment. The analysis was supported by predictions from EDGE2D-EIRENE simulations which were in qualitative agreement with the experimental observations

New H-mode regimes with small ELMs and high thermal confinement in the Joint European Torus

New H-mode regimes with high confinement, low core impurity accumulation, and small edge-localized mode perturbations have been obtained in magnetically confined plasmas at the Joint European Torus tokamak. Such regimes are achieved by means of optimized particle fueling conditions at high input power, current, and magnetic field, which lead to a self-organized state with a strong increase in rotation and ion temperature and a decrease in the edge density. An interplay between core and edge plasma regions leads to reduced turbulence levels and outward impurity convection. These results pave the way to an attractive alternative to the standard plasmas considered for fusion energy generation in a tokamak with a metallic wall environment such as the ones expected in ITER.&amp; nbsp;Published under an exclusive license by AIP Publishing

Overview of JET results for optimising ITER operation

The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER