229 research outputs found
Une approche pour l'approximation du profil en long des réseaux d'assainissement à partir de données incomplètes
Très souvent, les services techniques ne disposent que du plan du réseau d'assainissement sans le profil en long. Or les cotes radiers sont nécessaires aux simulations hydrauliques effectuées, par exemple, lors des études diagnostic. Pour pallier ce manque, les bureaux d'étude effectuent généralement un relevé sommaire et interpolent linéairement les cotes radier manquantes. Cette interpolation linéaire peut être la source d'erreurs importantes. Nous proposons donc dans cet article une nouvelle méthode d'interpolation permettant de minimiser ces erreurs. Cette méthode utilise trois types d'informations : les données connues, les contraintes et les critères. Les données connues correspondent aux informations disponibles quant au réseau. Les contraintes sont les règles constructives auxquelles tout réseau d'assainissement doit se conformer. Les critères sont les règles d'optimisation construites à partir d'observations sur des réseaux réels. Pour résoudre ce problème d'optimisation sous contraintes, nous utilisons des algorithmes génétiques parce que ces derniers sont capables de travailler avec un grand nombre de variables, des nombres réels et des fonctions non-linéaires.Des tests ont été effectués sur les réseaux des villes d'Annequin, de Bapaume et de Lyon. Dans tous les cas (tronçons longs ou courts, pente forte ou faible), les résultats obtenus avec notre méthode sont meilleurs que ceux obtenus avec la classique interpolation linéaire. Il est même possible de déterminer la présence de contre-pente.In order to realise hydraulic simulations of urban drainage networks, data describing the networks are needed. Very often, some of the invert levels are missing. Usually, design departments carry out an incomplete survey of the network invert levels and then linearly interpolate the missing ones. Our objective is to propose a more precise method to interpolate unknown invert levels. The method we propose in this paper involves computing (interpolating) the missing invert levels by using three types of information: (network) known data, constraints and criteria. Known data correspond to the (assumed) available information. Constraints are construction rules that any urban drainage network must respect. Criteria are optimisation rules based on observations of real urban drainage networks. To solve this problem, we use genetic algorithms because these algorithms are able to work with many variables, real numbers and non-linear functions.Tests have been carried out on urban drainage networks in Annequin, Bapaume and Lyon. The results obtained are quite good for long or short reaches, and for steep or nearly flat slopes. It is even possible to identify the presence of negative slopes. In all cases, the proposed method of interpolation gives better results than the linear interpolation
Le barrage des trois Gorges (Chine)
Le barrage des Trois Gorges, en construction sur le Yangzijiang, sera le plus grand barrage au monde. Le gigantisme du projet et sa médiatisation croissante en Occident permettent d'en saisir les enjeux environnementaux et humains. On analyse les grandes caractéristiques du projet et ses conséquences premières avant d'aborder le travail de recherche de l'équipe SIG de l'IGA de Grenoble qui vise à préparer la relocalisation de plus d'un million d'habitants, et à modéliser les impacts démographiques et sociaux
Analysis of charged particle emission sources and coalescence in E/A = 61 MeV Ar + Al, Sn and Sn collisions
Single-particle kinetic energy spectra and two-particle small angle
correlations of protons (), deuterons () and tritons () have been
measured simultaneously in 61A MeV Ar + Al, Sn and
Sn collisions. Characteristics of the emission sources have been
derived from a ``source identification plot'' (--
plot), constructed from the single-particle invariant spectra, and compared to
the complementary results from two-particle correlation functions. Furthermore,
the source identification plot has been used to determine the conditions when
the coalescence mechanism can be applied for composite particles. In our data,
this is the case only for the Ar + Al reaction, where , and are
found to originate from a common source of emission (from the overlap region
between target and projectile). In this case, the coalescence model parameter,
-- the radius of the complex particle emission source in momentum
space, has been analyzed.Comment: 20 pages, 5 figures, submitted to Nuclear Physics
Phenomenology of the Deuteron Electromagnetic Form Factors
A rigorous extraction of the deuteron charge form factors from tensor
polarization data in elastic electron-deuteron scattering, at given values of
the 4-momentum transfer, is presented. Then the world data for elastic
electron-deuteron scattering is used to parameterize, in three different ways,
the three electromagnetic form factors of the deuteron in the 4-momentum
transfer range 0-7 fm^-1. This procedure is made possible with the advent of
recent polarization measurements. The parameterizations allow a
phenomenological characterization of the deuteron electromagnetic structure.
They can be used to remove ambiguities in the form factors extraction from
future polarization data.Comment: 18 pages (LaTeX), 2 figures Feb. 25: minor changes of content and in
Table
Measurement of the analyzing power Ay0 for the reaction H(p⃗,d)π+ between 1000 and 1300 MeV
The analyzing power Ay0 of the reaction H(p⃗,d)π+ has been measured at a fixed value of the Mandelstam variable ud=-0.17GeV2 for nine proton energies between 1000 and 1300 MeV. The experiment was performed at SATURNE with the SPES1 spectrometer. The data exhibit structure around √s≃2.37GeV. The origin of this structure could be related to a resonancelike behavior of the 1S0P or 1G4F partial amplitudes
A precise measurement of the deuteron elastic structure function A(Q^2)
The A(Q^2) structure function in elastic electron-deuteron scattering was
measured at six momentum transfers Q^2 between 0.66 and 1.80 (GeV/c)^2 in Hall
C at Jefferson Laboratory. The scattered electrons and recoil deuterons were
detected in coincidence, at a fixed deuteron angle of 60.5 degrees. These new
precise measurements resolve discrepancies between older sets of data. They put
significant constraints on existing models of the deuteron electromagnetic
structure, and on the strength of isoscalar meson exchange currents.Comment: 3 LaTeX pages plus 2 PS figure
Measurement of the 3He(e,e'p)pn reaction at high missing energies and momenta
Results of the Jefferson Lab Hall A quasielastic 3He(e,e'p)pn measurements
are presented. These measurements were performed at fixed transferred momentum
and energy, q = 1502 MeV/c and omega = 840 MeV, respectively, for missing
momenta p_m up to 1 GeV/c and missing energies in the continuum region, up to
pion threshold; this kinematic coverage is much more extensive than that of any
previous experiment. The cross section data are presented along with the
effective momentum density distribution and compared to theoretical models.Comment: 5 pages, 3 figures, updated to reflect published paper: minor text
changes from previous version along with updated and added reference
Measurement of Tensor Polarization in Elastic Electron-Deuteron Scattering at Large Momentum Transfer
Tensor polarization observables (t20, t21 and t22) have been measured in
elastic electron-deuteron scattering for six values of momentum transfer
between 0.66 and 1.7 (GeV/c)^2. The experiment was performed at the Jefferson
Laboratory in Hall C using the electron HMS Spectrometer, a specially designed
deuteron magnetic channel and the recoil deuteron polarimeter POLDER. The new
data determine to much larger Q^2 the deuteron charge form factors G_C and G_Q.
They are in good agreement with relativistic calculations and disagree with
pQCD predictions.Comment: 5 pages, 4 figures, for associated informations, see
http://isnwww.in2p3.fr/hadrons/t20/t20_ang.html clarification about several
topics, one figure has been had, extraction of form factors use AQ
interpolation in our Q2 range onl
The Quasielastic 3He(e,e'p)d Reaction at Q^2 = 1.5 GeV^2 for Recoil Momenta up to 1 GeV/c
We have studied the quasielastic 3He(e,e'p)d reaction in perpendicular
coplanar kinematics, with the energy and momentum transferred by the electron
fixed at 840 MeV and 1502 MeV/c, respectively. The 3He(e,e'p)d cross section
was measured for missing momenta up to 1000 MeV/c, while the A_TL asymmetry was
extracted for missing momenta up to 660 MeV/c. For missing momenta up to 150
MeV/c, the measured cross section is described well by calculations that use a
variational ground-state wave function of the 3He nucleus derived from a
potential that includes three-body forces. For missing momenta from 150 to 750
MeV/c, strong final-state interaction effects are observed. Near 1000 MeV/c,
the experimental cross section is more than an order of magnitude larger than
predicted by available theories. The A_TL asymmetry displays characteristic
features of broken factorization, and is described reasonably well by available
models.Comment: 5 pages, 3 figures, submitted to Physical Review Letters, v3: changed
conten
Transverse Beam Spin Asymmetries in Forward-Angle Elastic Electron-Proton Scattering
We have measured the beam-normal single-spin asymmetry in elastic scattering
of transversely-polarized 3 GeV electrons from unpolarized protons at Q^2 =
0.15, 0.25 (GeV/c)^2. The results are inconsistent with calculations solely
using the elastic nucleon intermediate state, and generally agree with
calculations with significant inelastic hadronic intermediate state
contributions. A_n provides a direct probe of the imaginary component of the
2-gamma exchange amplitude, the complete description of which is important in
the interpretation of data from precision electron-scattering experiments.Comment: 5 pages, 3 figures, submitted to Physical Review Letters; shortened
to meet PRL length limit, clarified some text after referee's comment
- …