Consumer Energy Management System with Integration of Smart Meters

This paper develops an energy management system with integration of smart meters for electricity consumers in a smart grid context. The integration of two types of smart meters (SM) are developed: i) consumer owned SM and ii) distributor owned SM. The consumer owned SM runs over a wireless platform - ZigBee protocol and the distributor owned SM uses the wired environment - ModBus protocol. The SM are connected to a SCADA system (Supervisory Control And Data Acquisition) that supervises a network of Programmable Logic Controllers (PLC). The SCADA system/ PLC network integrates different types of information coming from the several technologies present in modern buildings. The developed control strategy implements an hierarchical cascade controller where inner loops are performed by local PLCs, and the outer loop is managed by a centralized SCADA system, which interacts with the entire local PLC network. In order to implement advanced controllers, a communication channel was developed to allow the communication between the SCADA system and the MATLAB software

Integration of Evora-InovGrid Smartmeters in a Consumer’s SCADA System

This paper develops an energy management system with smart meters integration for electricity consumers in a smart grid context. The integration of a distributor owned smart meter from the main Portuguese electricity distributor – EDP - is developed. The smart meter is connected to a common PC, that runs the Matlab Software and communicates to the SCADA system (Supervisory Control And Data Acquisition) using the OPC Protocol. The SCADA system supervises an industrial network of Programmable Logic Controllers (PLC). The developed control strategy implements a hierarchical cascade controller where inner loops are performed by local PLCs and the outer loop is managed by a centralized SCADA system, which interacts with the entire local PLC network

Increasing Acid Concentration, Time and Using a Two-Part Silane Potentiates Bond Strength of Lithium Disilicate-Reinforced Glass Ceramic to Resin Composite:An Exploratory Laboratory Study

There is still a lack of consensus concerning the recommended etching concentration, application time and type of silane when bonding lithium disilicate-reinforced glass ceramics manufactured by CAD/CAM. The purpose of this study was thus to conduct an in vitro study which investigates the influence of hydrofluoric acid (HF) concentration, etching time and silane type on the microtensile bond strength (μTBS) of lithium disilicate to resin composites. Thirty-nine IPS e.max CAD blocks were randomly divided between thirteen groups (n = 3). The variables were HF concentration (9.5 or 4.9%), etching time (20 or 60 s) and silane type (Bis-Silane, Monobond Plus and ESPE Sil Silane). The blocks were cut into beams, aged for 10,000 cycles in a thermocycler and submitted to tensile stress to determine μTBS. A control group featuring the Monobond Etch & Prime (MEP) agent that combines etching/silanisation into a simultaneous process was also added. This group was discarded from the analysis due to only having pre-test failures. The data were analysed using a three-way ANOVA (α = 0.05). The HF concentration, etching time and silane type significantly influenced μTBS (p < 0.001). Significant interactions between time and silane type (p = 0.004), HF concentration and silane type (p < 0.001) and among the three factors (p < 0.001) were noted. Etching lithium disilicate with 9.5% HF (60 s), followed by the application of Bis-Silane, resulted in the highest μTBS (16.6 ± 9.0 MPa). The highest concentration and etching time under study, combined with a two-part silane, resulted in the highest bond strength, while the application of MEP showed a complete pre-test failure

A New Boson with a Mass of 125 GeV Observed with the CMS Experiment at the Large Hadron Collider

Peer Reviewe

Beta-hemolytic Streptococcus dysgalactiae strains isolated from horses are a genetically distinct population within the Streptococcus dysgalactiae taxon

The pathogenic role of beta-hemolytic Streptococcus dysgalactiae in the equine host is increasingly recognized. A collection of 108 Lancefield group C (n = 96) or L (n = 12) horse isolates recovered in the United States and in three European countries presented multilocus sequence typing (MLST) alleles, sequence types and emm types (only 56% of the isolates could be emm typed) that were, with few exceptions, distinct from those previously found in human Streptococcus dysgalactiae subsp. equisimilis. Characterization of a subset of horse isolates by multilocus sequence analysis (MLSA) and 16S rRNA gene sequence showed that most equine isolates could also be differentiated from S. dysgalactiae strains from other animal species, supporting the existence of a horse specific genomovar. Draft genome information confirms the distinctiveness of the horse genomovar and indicates the presence of potentially horse-specific virulence factors. While this genomovar represents most of the isolates recovered from horses, a smaller MLST and MLSA defined sub-population seems to be able to cause infections in horses, other animals and humans, indicating that transmission between hosts of strains belonging to this group may occur

Soil and productivity mapping of Eucalyptus grandis plantations, using a geographic information system

Detailed environmental land characterization is essential for technical and financial planning, for both the scientific point of view and technological application. This work aimed at the physiographic and pedological characterization and eucalyptus productivity mapping at Itatinga Forest Sciences Experimental Station (southeastern Brazil), using geographic information systems in order to identify possible cause-effect relationships between forest productivity and soil attributes. The digital cartographic dataset was structured as follows: as primary source of data, aerial photograph and field survey were used and, as a secondary source, topographical, geological and land use occupation maps were used. For mapping wood productivity at age six (MAI6, Mean Annual Increment), inventory data of permanent plots (same species, provenance and age) were used, which were obtained from Eucalyptus grandis plantations. Using simple linear correlation and backward stepwise multiple regression analysis, the dependent variable (MAI) was related with physical and chemical characteristics of the soils. Two standards of contour curves were identified, one with close curves, narrow and surrounding the drainage network, in the steeper and lower altitude areas; the other, with spaced contour lines, in the areas of higher altitude and with plane relief. Six types of soils were characterized as being highly related to the physiographic patterns of the area: loamy sandy to sandy clayey Typic Hapludox (LVAd, 47.5%), clayey Rhodic Hapludox (LVd1, 33.4%), sandy clay Rhodic Hapludox (LVd2, 6%), clayey Rhodic Hapludox (LVdf, 9.1%), Entisols (G, 3.4%) and Fluvents soil (RY, 0.6%). There were large variations in wood productivity in the Eucalyptus grandis plantations, characterized in six classes, ranging from 26 to 52 m(3) ha(-1) yr(-1). These productivity changes were strictly related to soil mapping units. Through multiple regression analysis, we found that clay and organic matter contents were the attributes which most strongly explained the productivity differences

Macrocalcitonin Is a Novel Pitfall in the Routine of Serum Calcitonin Immunoassay

Context: Calcitonin (CT) is a sensitive marker of medullary thyroid carcinoma (MTC) and is used for primary diagnosis and follow-up after thyroidectomy. However, persistently elevated CT is observed even after complete surgical removal without evidence of a recurrent or persistent tumor. Objective: To investigate the presence of assay interference in the serum CT of MTC patients who are apparently without a structural disease. Patients and Methods: We studied three index MTC cases for CT assay interference and 14 patients with metastatic MTC. The CT level was measured using an immunofluorometric assay. Screening for assay interference was performed by determination of CT levels before and after serum treatment with polyethylene glycol. Additionally, samples were analyzed by chromatography on ultra-performance liquid chromatography and protein A-Sepharose. Results: Patients with biochemical and structural disease showed CT mean recovery of 84.1% after polyethylene glycol treatment, whereas patients suspected of interference showed recovery from 2-7%. The elution profile on UPLC showed that the immunometric CT from these three patients behaved like a high molecular mass aggregate (>300 kDa). Additionally, when these samples were applied to the protein A-Sepharose, CT immunoreactivity was retained on the column and was only released after lowering the pH. Conclusions: For the first time, our results show the presence of a novel pitfall in the CT immunoassay: "macrocalcitonin." Its etiology, frequency, and meaning remain to be defined, but its recognition is of interest and can help clinicians avoid unnecessary diagnostic investigations and treatment during the follow-up of MTC.Sao Paulo State Research Foundation-FAPESPFAPESPFederal Agency of Support and Evaluation of Postgraduate Education (Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior)National Council for Scientific and Technological DevelopmentUniv Fed Sao Paulo, Escola Paulista Med, Div Endocrinol, Dept Med,Thyroid Dis Ctr, BR-04039032 Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Escola Paulista Med, Div Endocrinol, Dept Med,Lab Mol & Translat Endocrinol, BR-04039032 Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Escola Paulista Med, Dept Biochem, Div Mol Biol, BR-04044020 Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Escola Paulista Med, Div Endocrinol, Dept Med,Thyroid Dis Ctr, BR-04039032 Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Escola Paulista Med, Div Endocrinol, Dept Med,Lab Mol & Translat Endocrinol, BR-04039032 Sao Paulo, SP, BrazilUniv Fed Sao Paulo, Escola Paulista Med, Dept Biochem, Div Mol Biol, BR-04044020 Sao Paulo, SP, BrazilFAPESP: 2006/60402-1FAPESP: 2010/51547-1FAPESP: 2010/19478Web of Scienc

Observation of Higgs boson production in association with a top quark pair at the LHC with the ATLAS detector

The observation of Higgs boson production in association with a top quark pair ( tt¯H ), based on the analysis of proton–proton collision data at a centre-of-mass energy of 13 TeV recorded with the ATLAS detector at the Large Hadron Collider, is presented. Using data corresponding to integrated luminosities of up to 79.8 fb −1 , and considering Higgs boson decays into bb¯ , WW⁎ , τ+τ− , γγ , and ZZ⁎ , the observed significance is 5.8 standard deviations, compared to an expectation of 4.9 standard deviations. Combined with the tt¯H searches using a dataset corresponding to integrated luminosities of 4.5 fb −1 at 7 TeV and 20.3 fb −1 at 8 TeV, the observed (expected) significance is 6.3 (5.1) standard deviations. Assuming Standard Model branching fractions, the total tt¯H production cross section at 13 TeV is measured to be 670 ± 90 (stat.) −100+110 (syst.) fb, in agreement with the Standard Model prediction.Peer Reviewe