582 research outputs found

    Effect of Meter Orientation Downstream of a Short Radius Elbow on Electromagnetic Flow Meters

    Get PDF
    Electromagnetic flow meters (known as magnetic flow meters) are a widely used type of flow meter. This study examines the performance of magnetic flow meters when the electrodes in the meter are positioned at two different orientations: electrodes parallel with the plane of an upstream 90° short radius elbow and electrodes perpendicular to the plane of an upstream 90° short radius elbow. Four different meters from four different manufacturers were included in the study in which a baseline straight pipe test was first performed using more than 50 diameters of straight pipe upstream of each meter. The four meters were then installed at five different locations downstream from a 90° short-radius elbow. At each location, the meters were tested in two orientations at five different flow rates. From this study, shifts in the flow rate were observed with the electrodes located at two different orientations. These shifts in flow rate ranged from 0.01% to 4.40% of the total flow measurement, and the average shifts in flow rate ranged from 0.07% to 2.78%. For the purposes of this study, the shift in flow rate is the percentage relative to the baseline test. The results from this study illustrated that there is a significant difference in measurement accuracy when the meter electrodes are installed at different orientations relative to the plane of the bend

    The alimentary impact of the hemp seed

    Get PDF
    Hemp seed and hemp seed oil can supply us with many important substances. Their essential fatty acid compositions are favourable, but they may contain non-psychotropic cannabinoids. Emerging data show that these components can influence the health status of the population beneficially. Some data also showed trace amounts of tetrahydrocannabinol in seed oils, the main psychotropic cannabinoid that is contraindicated.Our aim was to examine cannabinoids and fatty acid composition as well as metal and non-metal element compositions in products, like hemp seed oil and chopped hemp seed capsule.The cannabinoids were separated by thin layer chromatography. Fatty acid composition was determined with gas chromatography, and elements (Al, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, S, Si, Sn, Sr, V, and Zn) were measured by inductively coupled plasma optical emission spectrometric method. Selenium was determined with polarographic analyser.Cannabinoids were not detectable by thin layer chromatography, so hemp seed oil, as well as the capsule, have no psychotropic adverse effect. Our data showed that hemp seed contains essential fatty acids close to the recommended ratio. The B and Se concentrations of the oils and the P concentration of the capsule are also relevant

    Biofortification of UK food crops with selenium

    Get PDF
    Se is an essential element for animals. In man low dietary Se intakes are associated with health disorders including oxidative stress-related conditions, reduced fertility and immune functions and an increased risk of cancers. Although the reference nutrient intakes for adult females and males in the UK are 60 and 75 μg Se/d respectively, dietary Se intakes in the UK have declined from >60 μg Se/d in the 1970s to 35 μg Se/d in the 1990s, with a concomitant decline in human Se status. This decline in Se intake and status has been attributed primarily to the replacement of milling wheat having high levels of grain Se and grown on high-Se soils in North America with UK-sourced wheat having low levels of grain Se and grown on low-Se soils. An immediate solution to low dietary Se intake and status is to enrich UK-grown food crops using Se fertilisers (agronomic biofortification). Such a strategy has been adopted with success in Finland. It may also be possible to enrich food crops in the longer term by selecting or breeding crop varieties with enhanced Se-accumulation characteristics (genetic biofortification). The present paper will review the potential for biofortification of UK food crops with Se

    An Alternative Interpretation of Statistical Mechanics

    Get PDF
    In this paper I propose an interpretation of classical statistical mechanics that centers on taking seriously the idea that probability measures represent complete states of statistical mechanical systems. I show how this leads naturally to the idea that the stochasticity of statistical mechanics is associated directly with the observables of the theory rather than with the microstates (as traditional accounts would have it). The usual assumption that microstates are representationally significant in the theory is therefore dispensable, a consequence which suggests interesting possibilities for developing non-equilibrium statistical mechanics and investigating inter-theoretic answers to the foundational questions of statistical mechanics

    Data incongruence and the problem of avian louse phylogeny

    Get PDF
    Recent studies based on different types of data (i.e. morphological and molecular) have supported conflicting phylogenies for the genera of avian feather lice (Ischnocera: Phthiraptera). We analyse new and published data from morphology and from mitochondrial (12S rRNA and COI) and nuclear (EF1-) genes to explore the sources of this incongruence and explain these conflicts. Character convergence, multiple substitutions at high divergences, and ancient radiation over a short period of time have contributed to the problem of resolving louse phylogeny with the data currently available. We show that apparent incongruence between the molecular datasets is largely attributable to rate variation and nonstationarity of base composition. In contrast, highly significant character incongruence leads to topological incongruence between the molecular and morphological data. We consider ways in which biases in the sequence data could be misleading, using several maximum likelihood models and LogDet corrections. The hierarchical structure of the data is explored using likelihood mapping and SplitsTree methods. Ultimately, we concede there is strong discordance between the molecular and morphological data and apply the conditional combination approach in this case. We conclude that higher level phylogenetic relationships within avian Ischnocera remain extremely problematic. However, consensus between datasets is beginning to converge on a stable phylogeny for avian lice, at and below the familial rank

    Responsibility and Human Enhancement

    Get PDF
    The debate on human enhancement (HE), i.e. intentional effort to improve individuals\u2019 performance with the help of technical or biomedical interventions, has mainly centered on contrasting characterizations about either its moral legitimacy or technical plausibility, reaching an impasse. Looking for a way out of this stalemate, this collection of articles does not formulate prior standards to assess the desirability or legitimacy of enhancement, but explores some possible features for its responsible governance. Based on these assessments, the articles suggest possible approaches to systems design, regulation, and public engagement which can create conditions that allow for the the assumption and assignment of responsibility for HE and its ethical and social implications

    Risk factors for overweight and obesity after childhood acute lymphoblastic leukemia in North America and Switzerland: A comparison of two cohort studies.

    Get PDF
    BACKGROUND After childhood acute lymphoblastic leukemia (ALL), sequelae include overweight and obesity, yet with conflicting evidence. We compared the prevalence of overweight and obesity between ≥5-year ALL survivors from the North American Childhood Cancer Survivor Study (CCSS) and the Swiss Childhood Cancer Survivor Study (SCCSS) and described risk factors. METHODS We included adult childhood ALL survivors diagnosed between 1976 and 1999. We matched CCSS participants (3:1) to SCCSS participants by sex and attained age. We calculated body mass index (BMI) from self-reported height and weight for 1287 CCSS and 429 SCCSS participants; we then compared those with siblings (2034) in North America and Switzerland (678) siblings. We assessed risk factors for overweight (BMI 25-29.9 kg/m2 ) and obesity (≥30 kg/m2 ) using multinomial regression. RESULTS We found overweight and obesity significantly more common among survivors in North America when compared with survivors in Switzerland [overweight: 30%, 95% confidence interval (CI): 27-32 vs. 24%, 21-29; obesity: 29%, 27-32 vs. 7%, 5-10] and siblings (overweight: 30%, 27-32 vs. 25%, 22-29; obesity: 24%, 22-26 vs. 6%, 4-8). Survivors in North America [odds ratio (OR) = 1.24, 1.01-1.53] and Switzerland (1.27, 0.74-2.21) were slightly more often obese than siblings. Among survivors, risk factors for obesity included residency in North America (5.8, 3.7-9.0); male (1.7, 1.3-2.3); attained age (≥45 years: 5.1, 2.4-10.8); Non-Hispanic Black (3.4, 1.6-7.0); low household income (2.3, 1.4-3.5); young age at diagnosis (1.6, 1.1-2.2). Cranial radiotherapy ≥18 Gray was only a risk factor for overweight (1.4, 1.0-1.8); steroids were not associated with overweight or obesity. Interaction tests found no evidence of difference in risk factors between cohorts. CONCLUSIONS Although treatment-related risk for overweight and obesity were similar between regions, higher prevalence among survivors in North America identifies important sociodemographic drivers for informing health policy and targeted intervention trials

    The Role of Body Size and Shape in Understanding Competitive Interactions within a Community of Neotropical Dung Beetles

    Get PDF
    Geometric morphometrics is helpful for understanding how body size and body shape influence the strength of inter-specific competitive interactions in a community. Dung beetles, characterized by their use of decomposing organic material, provide a useful model for understanding the structuring of ecological communities and the role of competition based on their size and morphology. The relationship between body size and shape in a dung beetle community from the Atlantic Forest in Serra do Japi, Brazil was analyzed for 39 species. Fifteen anatomical landmarks on three-dimensional Cartesian coordinates were used to describe both the shape and the size of the body of each species on the basis of the centroid located along homologous points in all of the species. The first vector of a principal components analysis explained 38.5% of the morphological variation among species, and represents a gradient of body shape from elongated, flattened bodies with narrow abdomen to rounded or convex bodies. The second component explained 17.8% of the remaining variation in body shape, which goes from species with an abdomen that is larger than the elytra to species with constricted abdomens and large elytra. The relationship between body size and shape was analyzed separately for diurnal and nocturnal species. In both guilds not only were there differences in body size, but also in body shape, suggesting a reduction in their level of competition
    corecore