Influence of southern hemispheric biomass burning on midtropospheric distributions of nonmethane hydrocarbons and selected halocarbons over the remote South Pacific

Aircraft measurements of nonmethane hydrocarbons (NMHCs) and halocarbons were made over the remote South Pacific Ocean during late August-early October 1996 for NASA's Global Tropospheric Experiment (GTE) Pacific Exploratory Mission-Tropics A (PEM-Tropics A). This paper discusses the large-scale spatial distributions of selected trace gases encountered during PEM-Tropics A. The PEM-Tropics A observations are compared to measurements made over the southwestern pacific in early November 1995 as part of Aerosol Characterization Experiment (ACE 1). Continental pollution in the form of layers containing elevated levels of O3 was observed during a majority of PEM-Tropics flights, as well as during several ACE 1 flights. The chemical composition of these air masses indicates that they were not fresh and were derived from nonurban combustion sources. The substantial impact of biomass burning on the vertical structure of the South Pacific troposphere is discussed. Copyright 1999 by the American Geophysical Union

The specificity and patterns of staining in human cells and tissues of p16INK4a antibodies demonstrate variant antigen binding

The validity of the identification and classification of human cancer using antibodies to detect biomarker proteins depends upon antibody specificity. Antibodies that bind to the tumour-suppressor protein p16INK4a are widely used for cancer diagnosis and research. In this study we examined the specificity of four commercially available anti-p16INK4a antibodies in four immunological applications. The antibodies H-156 and JC8 detected the same 16 kDa protein in western blot and immunoprecipitation tests, whereas the antibody F-12 did not detect any protein in western blot analysis or capture a protein that could be recognised by the H-156 antibody. In immunocytochemistry tests, the antibodies JC8 and H-156 detected a predominately cytoplasmic localised antigen, whose signal was depleted in p16INK4a siRNA experiments. F-12, in contrast, detected a predominately nuclear located antigen and there was no noticeable reduction in this signal after siRNA knockdown. Furthermore in immunohistochemistry tests, F-12 generated a different pattern of staining compared to the JC8 and E6H4 antibodies. These results demonstrate that three out of four commercially available p16INK4a antibodies are specific to, and indicate a mainly cytoplasmic localisation for, the p16INK4a protein. The F-12 antibody, which has been widely used in previous studies, gave different results to the other antibodies and did not demonstrate specificity to human p16INK4a. This work emphasizes the importance of the validation of commercial antibodies, aside to the previously reported use, for the full verification of immunoreaction specificity

Non-Local Configuration of Component Interfaces by Constraint Satisfaction

© 2020 Springer-Verlag. The final publication is available at Springer via https://doi.org/10.1007/s10601-020-09309-y.Service-oriented computing is the paradigm that utilises services as fundamental elements for developing applications. Service composition, where data consistency becomes especially important, is still a key challenge for service-oriented computing. We maintain that there is one aspect of Web service communication on the data conformance side that has so far escaped the researchers attention. Aggregation of networked services gives rise to long pipelines, or quasi-pipeline structures, where there is a profitable form of inheritance called flow inheritance. In its presence, interface reconciliation ceases to be a local procedure, and hence it requires distributed constraint satisfaction of a special kind. We propose a constraint language for this, and present a solver which implements it. In addition, our approach provides a binding between the language and C++, whereby the assignment to the variables found by the solver is automatically translated into a transformation of C++ code. This makes the C++ Web service context compliant without any further communication. Besides, it uniquely permits a very high degree of flexibility of a C++ coded Web service without making public any part of its source code.Peer reviewe

Renal artery stenosis-when to screen, what to stent?

Renal artery stensosis (RAS) continues to be a problem for clinicians, with no clear consensus on how to investigate and assess the clinical significance of stenotic lesions and manage the findings. RAS caused by fibromuscular dysplasia is probably commoner than previously appreciated, should be actively looked for in younger hypertensive patients and can be managed successfully with angioplasty. Atheromatous RAS is associated with increased incidence of cardiovascular events and increased cardiovascular mortality, and is likely to be seen with increasing frequency. Evidence from large clinical trials has led clinicians away from recommending interventional revascularisation towards aggressive medical management. There is now interest in looking more closely at patient selection for intervention, with focus on intervening only in patients with the highest-risk presentations such as flash pulmonary oedema, rapidly declining renal function and severe resistant hypertension. The potential benefits in terms of improving hard cardiovascular outcomes may outweigh the risks of intervention in this group, and further research is needed

Carbonized blood deposited on fibres during 810, 940 and 1,470 nm endovenous laser ablation: thickness and absorption by optical coherence tomography

Endovenous laser ablation (EVLA) is commonly used to treat saphenous varicosities. Very high temperatures at the laser fibre tip have been reported during EVLA. We hypothesized that the laser irradiation deposits a layer of strongly absorbing carbonized blood of very high temperature on the fibre tip. We sought to prove the existence of these layers and study their properties by optical transmission, optical coherence tomography (OCT) and microscopy. We analysed 23 EVLA fibres, 8 used at 810 nm, 7 at 940 nm and 8 at 1,470 nm. We measured the transmission of these fibres in two wavelength bands (450–950 nm; 950–1,650 nm). We used 1,310 nm OCT to assess the thickness of the layers and the attenuation as a function of depth to determine the absorption coefficient. Microscopy was used to view the tip surface. All fibres showed a slightly increasing transmission with wavelength in the 450–950 nm band, and a virtually wavelength-independent transmission in the 950–1,650 nm band. OCT scans showed a thin layer deposited on all 13 fibres investigated, 6 used at 810 nm, 4 at 940 nm and 3 at 1,470 nm, some with inhomogeneities over the tip area. The average absorption coefficient of the 13 layers was 72 ± 16 mm−1. The average layer thickness estimated from the transmission and absorption measurements was 8.0 ± 2.7 µm. From the OCT data, the average maximal thickness was 26 ± 6 µm. Microscopy of three fibre tips, one for each EVLA wavelength, showed rough, cracked and sometimes seriously damaged tip surfaces. There was no clear correlation between the properties of the layers and the EVLA parameters such as wavelength, except for a positive correlation between layer thickness and total delivered energy. In conclusion, we found strong evidence that all EVLA procedures in blood filled veins deposit a heavily absorbing hot layer of carbonized blood on the fibre tip, with concomitant tip damage. This major EVLA mechanism is unlikely to have much wavelength dependence at similar delivered energies per centimetre of vein. Optical–thermal interaction between the vein wall and the transmitted laser light depends on wavelength

Seismic site characterization of the Kastelli (Kissamos) Basin in northwest Crete (Greece): Assessments using ambient noise recordings

Crete is actively seismic and site response studies are needed for estimating local site conditions subjected to seismic activity. In order to collect basic data, we performed ambient noise recordings to estimate the site response of the surface and near subsurface structure of the small-scale Kastelli Basin in northwest Crete. The spatial horizontal to vertical spectral ratios (HVSR) resonance pattern of the investigated sites in the centre of the Basin consists of either one or two peaks divided into low to high frequency range in different sites as follows: (a) in some sites only one amplified peak at low frequencies (0.6–1.2 Hz), (b) in other sites only one amplified peak at medium frequencies (2.9–8.5 Hz) and (c) in yet other sites two amplified peaks in the low to high frequency range (0.6–15.5 Hz). The investigated sites are amplified in the frequency range 0.6–15.5 Hz, while the amplitude reaches to a factor of 4 in the spectral ratios. The one HVSR amplified peak at low frequencies is related to locally soft or thick Quaternary deposits. Microtremors were measured in the coastal northwest part of the Basin in a well—lithified Cretaceous limestone site characterized by fractures and faults striking predominantly in a sector NNE to NNW. Sites of one amplified peak at medium frequencies are extended from coastal northwest to southwest delineating a structure striking to NNW. The two amplified peaks are attributed to shallow subsurface heterogeneities/irregularities, locally induced by fault zones and to the overlying Quaternary deposits. Spatial HVSR variations in the frequency and HVSR shape delineate four structures striking NNE, NNW and in a sector NW to WNW, crosscutting the dense populated Basin suggesting that microtremors could be a valuable tool for providing a first approximation of fault zone delineation at least for the Kastelli-Kissamos Basin. The Basin is classified into the X soil category of the Greek Seismic Code 2000.This work was implemented through the project entitled “Interdisciplinary Multi-Scale Research of Earth-quake Physics and Seismotectonics at the Front of the Hellenic Arc (IMPACT-ARC)” in the framework of action “ARCHIMEDES III—Support of Research Teams at TEI of Crete” (MIS380353) of the Operational Program “Education and Lifelong Learning” and is co-financed by the European Union (European Social Fund) and Greek national fund

Maximal respiratory static pressures in patients with different stages of COPD severity

<p>Abstract</p> <p>Background</p> <p>In this study, we analyzed maximal inspiratory pressure (MIP) and maximal expiratory pressure (MEP) values in a stable COPD population compared with normal subjects. We evaluated the possible correlation between functional maximal respiratory static pressures and functional and anthropometric parameters at different stages of COPD. Furthermore, we considered the possible correlation between airway obstruction and MIP and MEP values.</p> <p>Subject and methods</p> <p>110 patients with stable COPD and 21 age-matched healthy subjects were enrolled in this study. Patients were subdivided according to GOLD guidelines: 31 mild, 39 moderate and 28 severe.</p> <p>Results</p> <p>Both MIP and MEP were lower in patients with severe airway impairment than in normal subjects. Moreover, we found a correlation between respiratory muscle function and some functional and anthropometric parameters: FEV₁(forced expiratory volume in one second), FVC (forced vital capacity), PEF (peak expiratory flow), TLC (total lung capacity) and height. MIP and MEP values were lower in patients with severe impairment than in patients with a slight reduction of FEV₁.</p> <p>Conclusion</p> <p>The measurement of MIP and MEP indicates the state of respiratory muscles, thus providing clinicians with a further and helpful tool in monitoring the evolution of COPD.</p