Detector arrays for low-background space infrared astronomy

The status of development and characterization tests of integrated infrared detector array technology for astronomy applications is described. The devices under development include intrinsic, extrinsic silicon, and extrinsic germanium detectors, with hybrid silicon multiplexers. Laboratory test results and successful astronomy imagery have established the usefulness of integrated arrays in low-background astronomy applications

Performance of charge-injection-device infrared detector arrays at low and moderate backgrounds

Three 2 x 64 element charge injection device infrared detector arrays were tested at low and moderate background to evaluate their usefulness for space based astronomical observations. Testing was conducted both in the laboratory and in ground based telescope observations. The devices showed an average readout noise level below 200 equivalent electrons, a peak responsivity of 4 A/W, and a noise equivalent power of 3x10 sq root of W/Hz. Array well capacity was measured to be significantly smaller than predicted. The measured sensitivity, which compares well with that of nonintegrating discrete extrinsic silicon photoconductors, shows these arrays to be useful for certain astronomical observations. However, the measured readout efficiency and frequency response represent serious limitations in low background applications

Dynamics of canopy structure and light interception in Pinus elliottii stands, north Florida

In order to develop a model of the carbon cycle for mature slash pine (Pinus elliottii) stands in north Florida, we studied seasonal variation in leaf area index (LAI, allsided), aboveground biomass increment and litterfall, and light penetration through the forest canopy, over a 3-yr period. The primary approach to establishing monthly LAI included annual destructive analyses and monthly measurements of needle fall and elongation. Imagery from the Landsat Thematic Mapper (TM) and patterns of light penetration were also used in attempts to derive less arduous estimates; the TM imagery was most promising. LAIs ranged from 3.0 to 6.5 on control plots over the 3 yr, with repeated fertilization increasing maximum LAI by >40%. Seasonal variation was high (40%), as was variation from year to year. An average of 3 1% of the incident photosynthetically active radiation (PAR) penetrated the canopies annually, ranging from 18 to 42% seasonally. Seasonal light penetration could not be described using a simple application of the Beer-Lambert law, perhaps due to the highly aggregated nature of the canopies. Models incorporating more information on canopy structure are necessary to predict light penetration through slash pine stands accurately. A model of needle litterfall was derived that could account for much of the seasonal and annual variation using stand basal area and climate conditions from the spring of the previous year; this model may be useful for developing climate-driven predictions of LAI. Efficiencies of use of incoming and intercepted PAR were low compared to other forest types. Low light interception and high nutrient-use efficiencies (demonstrated in earlier studies) are important adaptive characteristics of slash pine stands to these relatively warm and nutrient-poor sites

Budget Processes: Theory and Experimental Evidence

This paper studies budget processes, both theoretically and experimentally. We compare the outcomes of bottom-up and top-down budget processes. It is often presumed that a top-down budget process leads to a smaller overall budget than a bottom-up budget process. Ferejohn and Krehbiel (1987) showed theoretically that this need not be the case. We test experimentally the theoretical predictions of their work. The evidence from these experiments lends strong support to their theory, both at the aggregate and the individual subject level

Thermal conductivity measurements of proton-heated warm dense aluminum.

Thermal conductivity is one of the most crucial physical properties of matter when it comes to understanding heat transport, hydrodynamic evolution, and energy balance in systems ranging from astrophysical objects to fusion plasmas. In the warm dense matter regime, experimental data are very scarce so that many theoretical models remain untested. Here we present the first thermal conductivity measurements of aluminum at 0.5-2.7 g/cc and 2-10 eV, using a recently developed platform of differential heating. A temperature gradient is induced in a Au/Al dual-layer target by proton heating, and subsequent heat flow from the hotter Au to the Al rear surface is detected by two simultaneous time-resolved diagnostics. A systematic data set allows for constraining both thermal conductivity and equation-of-state models. Simulations using Purgatorio model or Sesame S27314 for Al thermal conductivity and LEOS for Au/Al release equation-of-state show good agreement with data after 15 ps. Discrepancy still exists at early time 0-15 ps, likely due to non-equilibrium conditions

Sustaining entrepreneurial business: a complexity perspective on processes that produce emergent practice

This article examines the management practices in an entrepreneurial small firm which sustain the business. Using a longitudinal qualitative case study, four general processes are identified (experimentation, reflexivity, organising and sensing), that together provide a mechanism to sustain the enterprise. The analysis draws on concepts from entrepreneurship and complexity science. We suggest that an entrepreneur’s awareness of the role of these parallel processes will facilitate their approaches to sustaining and developing enterprises. We also suggest that these processes operate in parallel at multiple levels, including the self, the business and inter-firm networks. This finding contributes to a general theory of entrepreneurship. A number of areas for further research are discussed arising from this result

Quantitative localized proton-promoted dissolution kinetics of calcite using scanning electrochemical microscopy (SECM)

Scanning electrochemical microscopy (SECM) has been used to determine quantitatively the kinetics of proton-promoted dissolution of the calcite (101̅4) cleavage surface (from natural “Iceland Spar”) at the microscopic scale. By working under conditions where the probe size is much less than the characteristic dislocation spacing (as revealed from etching), it has been possible to measure kinetics mainly in regions of the surface which are free from dislocations, for the first time. To clearly reveal the locations of measurements, studies focused on cleaved “mirror” surfaces, where one of the two faces produced by cleavage was etched freely to reveal defects intersecting the surface, while the other (mirror) face was etched locally (and quantitatively) using SECM to generate high proton fluxes with a 25 μm diameter Pt disk ultramicroelectrode (UME) positioned at a defined (known) distance from a crystal surface. The etch pits formed at various etch times were measured using white light interferometry to ascertain pit dimensions. To determine quantitative dissolution kinetics, a moving boundary finite element model was formulated in which experimental time-dependent pit expansion data formed the input for simulations, from which solution and interfacial concentrations of key chemical species, and interfacial fluxes, could then be determined and visualized. This novel analysis allowed the rate constant for proton attack on calcite, and the order of the reaction with respect to the interfacial proton concentration, to be determined unambiguously. The process was found to be first order in terms of interfacial proton concentration with a rate constant k = 6.3 (± 1.3) × 10–4 m s–1. Significantly, this value is similar to previous macroscopic rate measurements of calcite dissolution which averaged over large areas and many dislocation sites, and where such sites provided a continuous source of steps for dissolution. Since the local measurements reported herein are mainly made in regions without dislocations, this study demonstrates that dislocations and steps that arise from such sites are not needed for fast proton-promoted calcite dissolution. Other sites, such as point defects, which are naturally abundant in calcite, are likely to be key reaction sites

The Banks set and the Uncovered Set in budget allocation problems

We examine how a society chooses to divide a given budget among various regions, projects or individuals. In particular, we characterize the Banks set and the Uncovered Set in such problems. We show that the two sets can be proper subsets of the set of all alternatives, and at times are very pointed in their predictions. This contrasts with well-known "chaos theorems," which suggest that majority voting does not lead to any meaningful predictions when the policy space is multidimensional