5,413 research outputs found

    The response of smoke detectors to pyrolysis and combustion products from aircraft interior materials

    Get PDF
    The following projects were completed as part of the effort to develop and test economically feasible fire-resistant materials for interior furnishings of aircraft as well as detectors of incipient fires in passenger and cargo compartments: (1) determination of the sensitivity of various contemporary gas and smoke detectors to pyrolysis and combustion products from materials commonly used in aircraft interiors and from materials that may be used in the future, (2) assessment of the environmental limitations to detector sensitivity and reliability. The tests were conducted on three groups of materials by exposure to the following three sources of exposure: radiant and Meeker burner flame, heated coil, and radiant source only. The first test series used radiant heat and flame exposures on easily obtainable test materials. Next, four materials were selected from the first group and exposed to an incandescent coil to provide the conditions for smoldering combustion. Finally, radiant heat exposures were used on advanced materials that are not readily available

    Bipolar molecular outflows driven by hydromagnetic protostellar winds

    Get PDF
    We demonstrate that magnetically-collimated protostellar winds will sweep ambient material into thin, radiative, momentum-conserving shells whose features reproduce those commonly observed in bipolar molecular outflows. We find the typical position-velocity and mass-velocity relations to occur in outflows in a wide variety of ambient density distributions, regardless of the time histories of their driving winds.Comment: 4 pages, 1 figure, submitted to ApJ

    Post-Foucauldian governmentality: what does it offer critical social policy analysis?

    Get PDF
    This article considers the theoretical perspective of post-Foucauldian governmentality, especially the insights and challenges it poses for applied researchers within the critical social policy tradition. The article firstly examines the analytical strengths of this approach to understanding power and rule in contemporary society, before moving on to consider its limitations for social policy. It concludes by arguing that these insights can be retained, and some of the weaknesses overcome, by adopting a ‘realist governmentality’ approach (Stenson 2005, 2008). This advocates combining traditional discursive analysis with more ethnographic methods in order to render visible the concrete activity of governing, and unravel the messiness, complexity and unintended consequences involved in the struggles around subjectivity

    What kind of Brexit do voters want? Lessons from the Citizens’ Assembly on Brexit

    Get PDF
    The Citizens’ Assembly on Brexit was a major exercise in deliberative public engagement conducted in autumn 2017. It brought together fifty randomly selected members of the public for two carefully structured weekends of listening, learning, reflecting and discussing. Assembly Members considered what post-Brexit arrangements the UK should pursue, focusing on trade and migration. On trade, most Members wanted the UK to pursue a bespoke arrangement with the EU and rejected the option of leaving the EU with no deal. On migration, most wanted the UK to maintain free movement of labour while using already available policy levers to reduce immigration numbers. These findings provide unique insight into informed public opinion on vital, pressing policy questions. The Assembly also illustrates the valuable role that such deliberative exercises could play in UK democracy. We suggest they could be particular helpful for unlocking progress on issues, such as the future of social care, that are often felt to be ‘too difficult’ to handle

    The Direct Sensing of Damage to Ion Implanted Materials

    Get PDF
    Material damage caused by the implantation of a high concentration of hydrogenic ions requires regular remote monitoring in order to study the atomic and nuclear reaction processes taking place within each sample. Real time continuous measurements of acoustic emission, X-ray production and emitted particle flux enable processes such as bubble or crack formation, changes in crystalline order, and nuclear fusion reactions can be studied in detail through examination of secondary or associated emission products. Fracturing of a material may generate a unique signature which, when taken in conjunction with time-averaged quantities such as changes in resistivity, surface strain, and induced radioactivity, enable an overall picture of the onset and nature of crack formation to be acquired. The overall usefulness of the remote sensing of damage processes and nuclear reactions is discussed. Surface studies involving inelastic Raman scattering and atomic force spectroscopy can contribute substantially to the overall picture, and identify clustering and cluster processes

    The beamformer and correlator for the Large European Array for Pulsars

    Get PDF
    The Large European Array for Pulsars combines Europe's largest radio telescopes to form a tied-array telescope that provides high signal-to-noise observations of millisecond pulsars (MSPs) with the objective to increase the sensitivity of detecting low-frequency gravitational waves. As part of this endeavor we have developed a software correlator and beamformer which enables the formation of a tied-array beam from the raw voltages from each of telescopes. We explain the concepts and techniques involved in the process of adding the raw voltages coherently. We further present the software processing pipeline that is specifically designed to deal with data from widely spaced, inhomogeneous radio telescopes and describe the steps involved in preparing, correlating and creating the tied-array beam. This includes polarization calibration, bandpass correction, frequency dependent phase correction, interference mitigation and pulsar gating. A link is provided where the software can be obtained.Comment: 10 pages, 6 figures, accepted for publication in Astronomy and Computin

    A search for X-ray emission from rich clusters, extended halos around clusters, and superclusters

    Get PDF
    The all-sky data base acquired with the HEAO A-2 experiment was searched for X-ray emission on a variety of metagalactic size scales which were either predicted or previously detected. Results in the 0.2-60 keV energy range are presented. The optically richest clusters, including those from which a microwave decrement were observed, appear to be relatively underluminous in X-rays. Observations of Abell 576 show its luminosity to be less than earlier estimates, and moreover less than the luminosity predicted from its microwave decrement, unless the intracluster gas is a factor of approximately 10 hotter than in typical clusters. Near SC0627 there are two X-ray sources, and the identification of the dominant source with SCO627 is probably incorrect. New spectral observations of Abell 401 and 2147, possible superclusters, reveal that they have typical cluster spectra with iron line emission

    Strange form factors of the nucleon in a two-component model

    Full text link
    The strange form factors of the nucleon are studied in a two-component model consisting of a three-quark intrinsic structure surrounded by a meson cloud. A comparison with the available experimental world data from the SAMPLE, PVA4, HAPPEX and G0 collaborations shows a good overall agreement. The strange magnetic moment is found to be positive, 0.315 nm.Comment: 11 pages, 2 tables, 5 figures, accepted for publication in J. Phys. G. Revised version, new figures, extra table, new results, updated reference

    Vertical migration maintains phytoplankton position in a tidal channel with residual flow

    Get PDF
    A tidal channel can retain phytoplankton, despite a residual flow, if the phytoplankton migrate vertically with a daily rhythm. Tidal currents are slowed down by bed friction and so plankton experience faster flow when higher in the water column. The lateral movement of the plankton depends on the nature of the vertical migration, particularly the time spent near the surface and the phase of the tide. A model of this process accorded with observations of chlorophyll derived from in situ fluorescence at a mooring in a tidal channel. Peaks in chlorophyll at the end of the flood tide indicated the presence of a phytoplankton bloom downstream of the mooring. Peaks in chlorophyll at the ends of the morning flood tides were 3 to 4 times larger than at the ends of the evening floods, over several days. In contrast, well-mixed particulates were removed from the channel by the residual flow in just 2 d. Both the day-night asymmetry and the sustained presence of chlorophyll were explained by allowing for vertical migration of the phytoplankton and constraining the period during which they were near the surface. Tidal channels retaining phytoplankton that migrate vertically can be ecologically more diverse and yield higher commercial output of farmed bivalves. The natural timings of some phytoplankton blooms in tidal channels are controlled by the nature of the migration. Although a by-product of vertical migration, longer residence in the tidal channel affords the phytoplankton more nutrients than phytoplankton that advect offshore
    • 

    corecore