Wind tunnel turning vanes of modern design

Rehabilitation of the Altitude Wind Tunnel includes the need for new corner turning vanes to match its upgraded performance. The design and experimental performance results from a 0.1-full scale model of the highest speed corner (M = 0.35) are presented and discussed along with some two dimensional inviscid analyses of two vaned corners. With a vane designed by an inverse two dimensional technique, the overall corner loss was about 12% of the inlet dynamic pressure of which about 4% was caused by vane skin friction. Comparable values with a conventionally designed circular arc vane were about 14% overall with about 7% due to skin friction

Searching for galaxy clusters in the Kilo-Degree Survey

In this paper, we present the tools used to search for galaxy clusters in the Kilo Degree Survey (KiDS), and our first results. The cluster detection is based on an implementation of the optimal filtering technique that enables us to identify clusters as over-densities in the distribution of galaxies using their positions on the sky, magnitudes, and photometric redshifts. The contamination and completeness of the cluster catalog are derived using mock catalogs based on the data themselves. The optimal signal to noise threshold for the cluster detection is obtained by randomizing the galaxy positions and selecting the value that produces a contamination of less than 20%. Starting from a subset of clusters detected with high significance at low redshifts, we shift them to higher redshifts to estimate the completeness as a function of redshift: the average completeness is ~ 85%. An estimate of the mass of the clusters is derived using the richness as a proxy. We obtained 1858 candidate clusters with redshift 0 < z_c < 0.7 and mass 13.5 < log(M500/Msun) < 15 in an area of 114 sq. degrees (KiDS ESO-DR2). A comparison with publicly available Sloan Digital Sky Survey (SDSS)-based cluster catalogs shows that we match more than 50% of the clusters (77% in the case of the redMaPPer catalog). We also cross-matched our cluster catalog with the Abell clusters, and clusters found by XMM and in the Planck-SZ survey; however, only a small number of them lie inside the KiDS area currently available.Comment: 13 pages, 15 figures. Accepted for publication on Astronomy & Astrophysic

Design and performance of a fixed, nonaccelerating, guide vane cascade that operates over an inlet flow angle range of 60 deg

A unique set of wind tunnel guide vanes are designed with an inverse design code and analyzed with a panel method and an integral boundary layer code developed at the NASA Lewis Research Center. The fixed guide vanes, 80 feet long with 6-foot chord length, were designed for the NASA Ames 40 x 80/80 x 120 ft Wind Tunnel. Low subsonic flow is accepted over a 60 deg range of inlet angle from either the 40 x 80 leg or the 80 x 120 leg of the wind tunnel, and directed axially into the main leg of the tunnel where drive fans are located. Experimental tests of 1/10-scale models were conducted to verify design calculations

The Educational Adjustment Program Profile: A Queensland Initiative in the identification and Monitoring of Students with a Disability

The effective identification and monitoring of students with a disability is a complex and important aspect of educational service delivery for students with a disability in Queensland. Building on previous initiatives in this domain Education Queensland has piloted the development of the Educational Adjustment Program (EAP) profile. Based on the data from the initial survey sample of more than 1500 school age students with a disability across Queensland, this paper highlights: the design of the Education Adjustment Program Adjustment Profile (EAP); some of its psychometric properties; gender and Indigenous student dimensions within the data; and how the EAP instrument compares with the 1 to 6 ascertainment rating scale

Nonlinear MDOF system characterization and identi cation using the Hilbert-Huang transform

The Hilbert transform is one of the most successful approaches to tracking the varying nature of vibration of a large class of nonlinear systems thanks to the extraction of backbone curves from experimental data. Because signals with multiple frequency components do not admit a well-behaved Hilbert transform, it is inherently limited to the analysis of single-degree-of-freedom systems. In this study, the joint application of the complexification-averaging method and the empirical mode decomposition enables us to develop a new technique, the slow-flow model identification method. Through numerical and experimental applications, we demonstrate that the proposed method is adequate for characterizing and identifying multi-degree-offreedom nonlinear systems

Trends in total column ozone measurements

It is important to ensure the best available data are used in any determination of possible trends in total ozone in order to have the most accurate estimates of any trends and the associated uncertainties. Accordingly, the existing total ozone records were examined in considerable detail. Once the best data set has been produced, the statistical analysis must examine the data for any effects that might indicate changes in the behavior of global total ozone. The changes at any individual measuring station could be local in nature, and herein, particular attention was paid to the seasonal and latitudinal variations of total ozone, because two dimensional photochemical models indicate that any changes in total ozone would be most pronounced at high latitudes during the winter months. The conclusions derived from this detailed examination of available total ozone can be split into two categories, one concerning the quality and the other the statistical analysis of the total ozone record

Nonlinear Resonances and Antiresonances of a Forced Sonic Vacuum

We consider a harmonically driven acoustic medium in the form of a (finite length) highly nonlinear granular crystal with an amplitude- and frequency-dependent boundary drive. Despite the absence of a linear spectrum in the system, we identify resonant periodic propagation whereby the crystal responds at integer multiples of the drive period and observe that this can lead to local maxima of transmitted force at its fixed boundary. In addition, we identify and discuss minima of the transmitted force (“antiresonances”) between these resonances. Representative one-parameter complex bifurcation diagrams involve period doublings and Neimark-Sacker bifurcations as well as multiple isolas (e.g., of period-3, -4, or -5 solutions entrained by the forcing). We combine them in a more detailed, two-parameter bifurcation diagram describing the stability of such responses to both frequency and amplitude variations of the drive. This picture supports a notion of a (purely) “nonlinear spectrum” in a system which allows no sound wave propagation (due to zero sound speed: the so-called sonic vacuum). We rationalize this behavior in terms of purely nonlinear building blocks: apparent traveling and standing nonlinear waves

Probabilistic Risk Assessment of Aging Layered Pressure Vessels

The National Aeronautics and Space Administration (NASA) operates approximately 300 aging layered pressure vessels that were designed and manufactured prior to ASME Boiler and Pressure Vessel (B&PV) code requirements. In order to make decisions regarding the continued fitness-for-service of these non-code carbon steel vessels, it is necessary to perform a relative risk of failure assessment for each vessel. However, risk assessment of these vessels is confounded by uncertainties and variabilities related to the use of proprietary materials in fabrication, missing construction records, geometric discontinuities, weld residual stresses, and complex service stress gradients in and around the welds. Therefore, a probabilistic framework that can capture these uncertainties and variabilities has been developed to assess the fracture risk of flaws in regions of interest, such as longitudinal and circumferential welds, using the NESSUS probabilistic modeling software and NASGRO fracture mechanics software. In this study, the probabilistic framework was used to predict variability in the stress intensity factor associated with different reference flaws located in the head-to-shell circumferential welds of a 4-layer and 14-layer pressure vessel. The probabilistic studies predict variability in flaw behavior and the important uncertain parameters for each reference flaw location

Exploring the components, asymmetry and distribution of relationship quality in wild Barbary macaques (Macaca sylvanus)

Social relationships between group members are a key feature of many animal societies. The quality of social relationships has been described by three main components: value, compatibility and security, based on the benefits, tenure and stability of social exchanges. We aimed to analyse whether this three component structure could be used to describe the quality of social relationships in wild Barbary macaques (Macaca sylvanus). Moreover, we examined whether relationship quality was affected by the sex, age and rank differences between social partners, and investigated the asymmetric nature of social relationships. We collected over 1,900 hours of focal data on seven behavioural variables measuring relationship quality, and used principal component analysis to investigate how these variables clustered together. We found that relationship quality in wild Barbary macaques can be described by a three component structure that represents the value, compatibility and security of a relationship. Female-female dyads had more valuable relationships and same-age dyads more compatible relationships than any other dyad. Rank difference had no effect on the quality of a social relationship. Finally, we found a high degree of asymmetry in how members of a dyad exchange social behaviour. We argue that the asymmetry of social relationships should be taken into account when exploring the pattern and function of social behaviour in animal societies