2,064 research outputs found
Research in the design of high-performance reconfigurable systems
An initial design for the Bit Processor (BP) referred to in prior reports as the Processing Element or PE has been completed. Eight BP's, together with their supporting random-access memory, a 64 k x 9 ROM to perform addition, routing logic, and some additional logic, constitute the components of a single stage. An initial stage design is given. Stages may be combined to perform high-speed fixed or floating point arithmetic. Stages can be configured into a range of arithmetic modules that includes bit-serial one or two-dimensional arrays; one or two dimensional arrays fixed or floating point processors; and specialized uniprocessors, such as long-word arithmetic units. One to eight BP's represent a likely initial chip level. The Stage would then correspond to a first-level pluggable module. As both this project and VLSI CAD/CAM progress, however, it is expected that the chip level would migrate upward to the stage and, perhaps, ultimately the box level. The BP RAM, consisting of two banks, holds only operands and indices. Programs are at the box (high-level function) and system level. At the system level initial effort has been concentrated on specifying the tools needed to evaluate design alternatives
Dual-functional materials via CCTP and selective orthogonal thiol-Michael addition/epoxide ring opening reactions
Poly(glycidyl methacrylate) (PGMA) has been synthesised by cobalt catalysed chain transfer polymerisation (CCTP) yielding, in one step, polymers with two points for post polymerisation functionalisation; the activated terminal vinyl bond and in chain epoxide groups. Epoxide ring-opening and a combination of thiol-Michael addition and epoxide ring-opening has been used for the post-functionalisation with amines and thiols to prepare a range of functional materials
Truncation of TRIM5 in the <i>Feliformia</i> explains the absence of retroviral restriction in cells of the domestic cat
TRIM5[alpha] mediates a potent retroviral restriction phenotype in diverse mammalian species. Here, we identify a TRIM5 transcript in cat cells with a truncated B30.2 capsid binding domain and ablated restrictive function which, remarkably, is conserved across the <i>Feliformia</i>. Cat TRIM5 displayed no restriction activity, but ectopic expression conferred a dominant negative effect against human TRIM5[alpha]. Our findings explain the absence of retroviral restriction in cat cells and suggest that disruption of the TRIM5 locus has arisen independently at least twice in the <i>Carnivora</i>, with implications concerning the evolution of the host and pathogen in this taxon
Ion-Molecule Reactions in Unsaturated Hydrocarbons: Allene, Propyne, Diacetylene, and Vinylacetylene
Ion-molecule reactions in allene, propyne, diacetylene, and vinylacetylene (1-buten-3-yne) have been studied at near-thermal energies by the technique of ion cyclotron resonance mass spectrometry. Rate coefficients and branching ratios are reported for the reactions of C_3H^+_n (n = 1-4) with allene and propyne and for the reactions of C_4H^+_n (n = 0-5) with diacetylene and vinylacetylene. Branching ratios are also given for the reactions of C_4H^+_n, C_5H_n, and C_6H^+_n with propyne and for reactions of C_6H^+_n with diacetylene and vinylacetylene. More than 90% of the reactive channels lead to product ions having a larger carbon skeleton than the reactant ion. Evidence for ions with the same m/e ratio having differing reactivities was obtained for C_3H^+_3, C_6H^+_7, and C_7H^+_7. Ion reaction sequences in allene and propyne were followed at higher pressures (l0^(-4) torr) to investigate secondary, tertiary, and higher order processes
Solution of an associating lattice gas model with density anomaly on a Husimi lattice
We study a model of a lattice gas with orientational degrees of freedom which
resemble the formation of hydrogen bonds between the molecules. In this model,
which is the simplified version of the Henriques-Barbosa model, no distinction
is made between donors and acceptors in the bonding arms. We solve the model in
the grand-canonical ensemble on a Husimi lattice built with hexagonal
plaquettes with a central site. The ground-state of the model, which was
originally defined on the triangular lattice, is exactly reproduced by the
solution on this Husimi lattice. In the phase diagram, one gas and two liquid
(high density-HDL and low density-LDL) phases are present. All phase
transitions (GAS-LDL, GAS-HDL, and LDL-HDL) are discontinuous, and the three
phases coexist at a triple point. A line of temperatures of maximum density
(TMD) in the isobars is found in the metastable GAS phase, as well as another
line of temperatures of minimum density (TmD) appears in the LDL phase, part of
it in the stable region and another in the metastable region of this phase.
These findings are at variance with simulational results for the same model on
the triangular lattice, which suggested a phase diagram with two critical
points. However, our results show very good quantitative agreement with the
simulations, both for the coexistence loci and the densities of particles and
of hydrogen bonds. We discuss the comparison of the simulations with our
results.Comment: 12 pages, 5 figure
Modelling of an Oesophageal Electrode for Cardiac Function Tomography
There is a need in critical care units for continuous cardiopulmonary monitoring techniques. ECG gated electrical impedance tomography is able to localize the impedance variations occurring during the cardiac cycle. This method is a safe, inexpensive and potentially fast technique for cardiac output imaging but the spatial resolution is presently low, particularly for central locations such as the heart. Many parameters including noise deteriorate the reconstruction result. One of the main obstacles in cardiac imaging at the heart location is the high impedance of lungs and muscles on the dorsal and posterior side of body. In this study we are investigating improvements of the measurement and initial conductivity estimation of the internal electrode by modelling an internal electrode inside the esophagus. We consider 16 electrodes connected around a cylindrical mesh. With the random noise level set near 0.05% of the signal we evaluated the Graz consensus reconstruction algorithm for electrical impedance tomography. The modelling and simulation results showed that the quality of the target in reconstructed images was improved by up to 5 times for amplitude response, position error, resolution, shape deformation and ringing effects with perturbations located in cardiac related positions when using an internal electrode
Creating a clinician. A methodology to evaluate clinical reasoning and case-based decision making.
Investigation of prediction methods for the loads and stresses of Apollo type spacecraft parachutes. Volume 1: Loads
An analysis was conducted with the objective of upgrading and improving the loads, stress, and performance prediction methods for Apollo spacecraft parachutes. The subjects considered were: (1) methods for a new theoretical approach to the parachute opening process, (2) new experimental-analytical techniques to improve the measurement of pressures, stresses, and strains in inflight parachutes, and (3) a numerical method for analyzing the dynamical behavior of rapidly loaded pilot chute risers
Self-aligned 0.12mm T-gate In.53Ga.47As/In.52Al.48As HEMT Technology Utilising a Non Annealed Ohmic Contact Strategy
An InGaAs/InAlAs based HEMT structure, lattice matched to an InP substrate, is presented in which drive current and transconductance has been optimized through a double-delta doping strategy. Together with an increase in channel carrier density, this allows the use of a non-annealed ohmic contact process. HEMT devices with 120 nm standard and self-aligned T-gates were fabricated using the non-annealed ohmic process. At DC, self-aligned and standard devices exhibited transconductances of up to 1480 and 1100 mS/mm respectively, while both demonstrated current densities in the range 800 mA/mm. At RF, a cutoff frequency f/sub T/ of 190 GHz was extracted for the self-aligned device. The DC characteristics of the standard devices were then calibrated and modelled using a compound semiconductor Monte Carlo device simulator. MC simulations provide insight into transport within the channel and illustrate benefits over a single delta doped structure
Turbulence structure of open channel flows over permeable and impermeable beds : A comparative study
Peer reviewedPublisher PD
- …