Aqueous pathways for the formation of zinc oxide nanoparticles

We examine the effect of reactant concentrations, temperatures and feeding methods on the morphology of ZnO formed when reacting solutions of ZnSO 4 and NaOH. The catalytic effect of hydroxide in excess relative to the stoichiometric ratio is considered. It is shown that, having fixed other reaction conditions, the end-products, particle structures and size strongly depend on the mole ratio of the precursors. The presence of zinc salt hydroxide species was confirmed at sub-stoichiometric ratios in slightly acidic conditions. At the stoichiometric ratio both zinc hydroxide and zinc oxide are formed, while only zinc oxide forms in an excess of hydroxide. The method of feeding the reactants into the reaction vessel also has a strong influence on the end-product properties, as does the reaction temperature. By control of these parameters the specific surface area could be varied from 10 to 33 m 2 g-1, the particle shape could be varied from equiaxed, through to star-like and needle-like, and the particle size may be varied from 50 to over 300 nm. © 2011 The Royal Society of Chemistry

On the formation of nanocrystalline active zinc oxide from zinc hydroxide carbonate

The decomposition of zinc hydroxide carbonate, Zn5(CO 3)2(OH)6 (ZHC), into the high surface area form of ZnO known as "active zinc oxide" is examined. In particular, the nucleation and evolution of the ZnO nanocrystals is of interest as the size of these particles controls the activity of the product. The decomposition process was studied using X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy and BET surface area measurements. At about 240°C ZHC decomposes to porous ZnO in a single step. The product material has a specific surface area in the range of 47-65 m 2 g-1 and initially has a crystallite size that is of the order of 10 nm. A further increase in temperature, however, causes the particles to coarsen to over 25 nm in diameter. In principle, the coarsening phenomenon may be interrupted to control the particle size. © Springer Science+Business Media 2014

Magnetised titanium dioxide (TiO2) for water purification: preparation, characterisation and application

© 2014 Balaban Desalination Publications. All rights reserved. The study of titanium dioxide (TiO2) as a photocatalyst for water purification has attracted significant attention over the past four decades. However, the separation of photocatalyst from water suspension may be difficult, costly and jeopardise the use of this water treatment technology. Recently, the development and production of magnetised TiO2 have been achieved to offer a solution for the photocatalyst separation problem. This paper discusses the preparation techniques, characterisation and the applications of magnetised TiO2. Many researchers have studied magnetised TiO2 photocatalysts but the lack of articles discussing the water purification processes is still slowing any advance in this field. Here, the progress of the scientific research on preparation techniques to coat magnetic particles by materials such as organic polymers, silica, magnesia, and alumina are reviewed to compare and discuss recent findings. The doping of photoactive TiO2 photocatalyst into the magnetic-coated particles is also emphasised. In addition, the characterisation of magnetised TiO2 in terms of physicochemical properties and operating conditions produced by each technique are critically reviewed. Moreover, examples of applications of TiO2 and magnetised TiO2 photocatalyst in water purification are summarised. In general, the effectiveness of organic removal by magnetised TiO2 is still lower compared to single phase TiO2. The future prospect of this field is deliberated to develop a novel, economic and efficient magnetised TiO2 photocatalyst, which has high organic removal properties

Intramolecular H⋯S interactions in metal di-(isopropyl)dithiocarbamate complexes

© 2016 The Royal Society of Chemistry. Networks of C-H⋯S interactions have been discovered within the molecular structure of sodium di-(isopropyl)dithiocarbamate pentahydrate with the formula Na(C7H14NS2)·5H2O, revealed by single crystal X-ray diffraction. These interactions have also been investigated by ab initio and Hirshfeld surface analyses which show that the electron density is not symmetrical about the molecule. NMR spectroscopy in solution and solid the state showed temperature dependent restricted rotation of the isopropyl groups, which is attributed to the intramolecular C-H⋯S interactions. The ubiquitous nature of C-H⋯S intramolecular interactions in this class of compound is evident in the structures of other di-(isopropyl)dithiocarbamate complexes deposited in the CSD. In general, the restricted rotation in di-(isopropyl)dithiocarbamate complexes can be directly attributed to intramolecular C-H⋯S interactions, which subsequently influence the geometry in association with steric repulsion factors

Photodesorption of specific organic compounds from titanium dioxide particles in aqueous media

This study investigates the photodesorption of organic compounds (beef extract, peptone, humic acid, tannic acid, sodium lignin sulphonate, sodium lauryl sulphate, arabic gum powder and arabic acid) from TiO2 (1 g/L in water, pH 7). After a period to reach adsorption equilibrium, photodesorption experiments were conducted in a recirculated reactor at a constant flow rate of 150 mL/min with a UV light intensity of 24 W. Photodesorption was observed only for sodium lauryl sulphate (50%), sodium lignin sulphonate (43.47%), beef extract (20.35%) and tannic acid (10.5%) indicating that photodesorption is specific to some organic compounds but not to all. Using liquid chromatography-organic carbon detection, untreated beef extract and sodium lignin sulphonate were found to contain significant amounts of humic substances (∼1,000 g/mol), which decreased in concentration after dark phase adsorption, while a significant increase in low molecular weight (<350 g/mol) concentrations was observed after photodesorption. UV-treated sodium lauryl sulphate photodesorbed to give both higher molecular weight (HMW) and lower molecular weight (LMW) organics. Thus, the HMW fractions of organic compounds decomposed into smaller compounds after UV irradiation, which subsequently desorbed from TiO2 surface. However, untreated tannic acid contained a larger proportion of LMW acids, which shows a high adsorption affinity to TiO2 during adsorption and poorly desorbs upon irradiation. © 2013 © 2013 Balaban Desalination Publications. All rights reserved

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet

© 2014 . Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 (P25) in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30nm were obtained. Larger size fibrous nanowires resulting from the hydrothermal treatment showed high affinity in adsorbing crystal violet (CV), which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalytic degradation, and they can be easily separated from the solution by settling

A new dawn? The Roman Catholic Church and environmental issues

This is a PDF version of an article published in New Blackfriars© 1997. The definitive version is available at www.blackwell-synergy.com.This article discusses the stance of the Roman Catholic Church on environmental issues and argues that the Church tends to stay on the fringe rather than get involved. Some of the ways in which Roman Catholic theologians have incorporated environmental issues into theological reflection is discussed, as are environmental challenges facing the Church in Britain (conservation, resources, biodiversity, animal welfare, biotechnology, cooperate/individual ethics, environmental justice, economics/policy development, and global issues)

Risk factors for feline infectious peritonitis in Australian cats

Objective: To determine whether patient signalment (age, breed, sex, and neuter status) are associated with naturally occurring feline infectious peritonitis (FIP) in cats in Australia. Design: A retrospective comparison of the signalment between cats with confirmed FIP and the general cat population. Results: The patient signalment of 382 FIP confirmed cases were compared with the Companion Animal Register of NSW and the general cat population of Sydney. Younger cats were significantly over-represented amongst FIP cases. Domestic crossbred, Persian, and Himalayan cats were significantly under-represented in the FIP cohort while several breeds were over-represented including British Shorthair, Devon Rex, and Abyssinian. A significantly higher proportion of male cats had FIP compared to female cats. Conclusion: This study provides further evidence that FIP is primarily a disease of young cats and that significant breed and sex predilections exist in Australia. This opens further avenues to investigate the role of genetic factors in FIP

Risk factors for feline infectious peritonitis in Australian cats

Objective: To determine whether patient signalment (age, breed, sex, and neuter status) are associated with naturally occurring feline infectious peritonitis (FIP) in cats in Australia. Design: A retrospective comparison of the signalment between cats with confirmed FIP and the general cat population. Results: The patient signalment of 382 FIP confirmed cases were compared with the Companion Animal Register of NSW and the general cat population of Sydney. Younger cats were significantly over-represented amongst FIP cases. Domestic crossbred, Persian, and Himalayan cats were significantly under-represented in the FIP cohort while several breeds were over-represented including British Shorthair, Devon Rex, and Abyssinian. A significantly higher proportion of male cats had FIP compared to female cats. Conclusion: This study provides further evidence that FIP is primarily a disease of young cats and that significant breed and sex predilections exist in Australia. This opens further avenues to investigate the role of genetic factors in FIP