280 research outputs found
Estimation of offsets in GPS time-series and application to the detection of earthquake deformation in the far-field
Extracting geophysical signals from Global Positioning System (GPS) coordinate time-series is a well-established practice that has led to great insights into how the Earth deforms. Often small discontinuities are found in such time-series and are traceable to either broad-scale deformation (i.e. earthquakes) or discontinuities due to equipment changes and/or failures. Estimating these offsets accurately enables the identification of coseismic deformation estimates in the former case, and the removal of unwanted signals in the latter case which then allows tectonic rates to be estimated more accurately. We develop a method to estimate accurately discontinuities in time series of GPS positions at specified epochs, based on a so-called âoffset seriesâ. The offset series are obtained by varying the amount of GPS data before and after an event while estimating the offset. Two methods, a mean and a weighted mean method, are then investigated to produce the estimated discontinuity from the offset series. The mean method estimates coseismic offsets without making assumptions about geophysical processes that may be present in the data (i.e. tectonic rate, seasonal variations), whereas the weighted mean method includes estimating coseismic offsets with a model of these processes. We investigate which approach is the most appropriate given certain lengths of available data and noise within the time-series themselves. For the SumatraâAndaman event, with 4.5âyr of pre-event data, we show that between 2 and 3âyr of post-event data are required to produce accurate offset estimates with the weighted mean method. With less data, the mean method should be used, but the uncertainties of the estimated discontinuity are larger
Co-Seismic Displacements of the 1994 Northridge, California, Earthquake
The 17 January 1994 Northridge, California, earthquake significantly deformed the Earth's crust in the epicentral region. Displacements of 66 survey stations determined from Global Positioning System (GPS) observations collected before and after the earthquake show that individual stations were uplifted by up to 417 ± 5 mm and displaced horizontally by up to 216 ± 3 mm. Using these displacements, we estimate parameters of a uniform-slip model. Fault geometry and slip are estimated independent of seismological information, using Monte Carlo optimization techniques that minimize the model residuals. The plane that best fits the geodetic data lies 1 to 2 km above the plane indicated by aftershock seismicity. Modeling for distributed slip on a coplanar, yet larger model fault indicates that a high-slip patch occurred up-dip and northwest of the mainshock hypocenter and that less than 1 m of slip occurred in the uppermost 5 km of the crust. This finding is consistent with the lack of clear surface rupture and with the notion that the intersection with the fault that ruptured in 1971 formed the up-dip terminus of slip in the Northridge earthquake. Displacements predicted by either of these simple models explain most of the variance in the data within 50 km of the epicenter. On average, however, the scatter of the residuals is twice the data uncertainties, and in some areas, there is significant systematic misfit to either model. The co-seismic contributions of aftershocks are insufficient to explain this mismatch, indicating that the source geometry is more complicated than a single rectangular plane
Identifying Trends in Masterplanning: A Typological Classification System
This document is the Accepted Manuscript version of the following article: Robert Adam, and Claire Jamieson, âIdentifying trends in masterplanning: A typological classification systemâ, URBAN DESIGN International, Vol. 19 (4): 274-290, December 2014. The final publication is available at Springer via https://doi.org/10.1057/udi.2013.24.This article reports research carried out to develop a new typological method for the analysis of masterplans. This quantitative method of analysis can be used to produce comparative data that will help in the comparison of urban design typologies and their development over time. This article sets out the research to date, describing how the initial aims have developed from simple analysis to the creation of an analytical tool with wide applications. Comprising a detailed taxonomy of urban design features gathered from a wide database of recent and emerging masterplans, the system provides opportunities for further study such as trends, qualitative comparison against quantitative measurement, and comparison of aims and outcomes. This article will describe the methodology and process of research, while elaborating on the potential of the tool.Peer reviewedFinal Accepted Versio
The Sex Chromosome Trisomy mouse model of XXY and XYY: metabolism and motor performance
BACKGROUND: Klinefelter syndrome (KS), caused by XXY karyotype, is characterized by low testosterone, infertility, cognitive deficits, and increased prevalence of health problems including obesity and diabetes. It has been difficult to separate direct genetic effects from hormonal effects in human studies or in mouse models of KS because low testosterone levels are confounded with sex chromosome complement. METHODS: In this study, we present the Sex Chromosome Trisomy (SCT) mouse model that produces XXY, XYY, XY, and XX mice in the same litters, each genotype with either testes or ovaries. The independence of sex chromosome complement and gonadal type allows for improved recognition of sex chromosome effects that are not dependent on levels of gonadal hormones. All mice were gonadectomized and treated with testosterone for 3 weeks. Body weight, body composition, and motor function were measured. RESULTS: Before hormonal manipulation, XXY mice of both sexes had significantly greater body weight and relative fat mass compared to XY mice. After gonadectomy and testosterone replacement, XXY mice (both sexes) still had significantly greater body weight and relative fat mass, but less relative lean mass compared to XY mice. Liver, gonadal fat pad, and inguinal fat pad weights were also higher in XXY mice, independent of gonadal sex. In several of these measures, XX mice also differed from XY mice, and gonadal males and females differed significantly on almost every metabolic measure. The sex chromosome effects (except for testis size) were also seen in gonadally female mice before and after ovariectomy and testosterone treatment, indicating that they do not reflect group differences in levels of testicular secretions. XYY mice were similar to XY mice on body weight and metabolic variables but performed worse on motor tasks compared to other groups. CONCLUSIONS: We find that the new SCT mouse model for XXY and XYY recapitulates features found in humans with these aneuploidies. We illustrate that this model has significant promise for unveiling the role of genetic effects compared to hormonal effects in these syndromes, because many phenotypes are different in XXY vs. XY gonadal female mice which have never been exposed to testicular secretions
Fault orientations in the upper crust beneath an intraplate active zone in northern Egypt
In-situ evidence for dextral active motion at the Arabia-India plate boundary
International audienceThe Arabia-India plate boundary--also called theOwen fracture zone--is perhaps the least-known boundary among large tectonic plates1-6. Although it was identified early on as an example of a transform fault converting the divergent motion along the Carlsberg Ridge to convergent motion in the Himalayas7, its structure and rate of motion remains poorly constrained. Here we present the first direct evidence for active dextral strike-slip motion along this fault, based on seafloor multibeam mapping of the Arabia-India-Somalia triple junction in the northwest Indian Ocean. There is evidence for 12km of apparent strike-slip motion along the mapped segment of the Owen fracture zone, which is terminated to the south by a 50-km-wide pull-apart basin bounded by active faults. By evaluating these new constraints within the context of geodetic models of global plate motions, we determine a robust angular velocity for the Arabian plate relative to the Indian plate that predicts 2-4mmyrâ1 dextral motion along the Owen fracture zone. This transformfault was probably initiated around 8 million years ago in response to a regional reorganization of plate velocities and directions8-11, which induced a change in configuration of the triple junction. Infrequent earthquakes of magnitude 7 and greater may occur along the Arabia-India plate boundary, unless deformation is in the formof aseismic creep
Extension and stress during continental breakup: seismic anisotropy of the crust in Northern Afar
Studies that attempt to simulate continental rifting and subsequent breakup require detailed knowledge of crustal stresses, however observational constraints from continental rifts are lacking. In addition, a knowledge of the stress field around active volcanoes can be used to detect sub-surface changes to the volcanic system. Here we use shear wave splitting to measure the seismic anisotropy of the crust in Northern Afar, a region of active, magma-rich continental breakup. We combine shear wave splitting tomography with modelling of gravitational and magmatic induced stresses to propose a model for crustal stress and strain across the rift. Results show that at the Ethiopian Plateau, seismic anisotropy is consistently oriented NâS. Seismic anisotropy within the rift is generally oriented NNWâSSE, with the exception of regions north and south of the Danakil Depression where seismic anisotropy is rift-perpendicular. These results suggest that the crust at the rift axis is characterized by rift-aligned structures and melt inclusions, consistent with a focusing of tectonic extension at the rift axis. In contrast, we show that at regions within the rift where extension rate is minimal the seismic anisotropy is best explained by the gravitationally induced stress field originating from variations in crustal thickness. Seismic anisotropy away from the rift is controlled by a combination of inherited crustal structures and gravitationally induced extension whereas at the Dabbahu region we show that the stress field changes orientation in response to magmatic intrusions. Our proposed model provides a benchmark of crustal stress in Northern Afar which will aid the monitoring of volcanic hazard. In addition we show that gravitational forces play a key role in measurements of seismic anisotropy, and must be considered in future studies. We demonstrate that during the final stages of continental rifting the stress field at the rift axis is primarily controlled by tectonic extension, but that gravitational forces and magmatic intrusions can play a key role in the orientation of the stress field
Determination of the 30-year creep trend on the IsmetpaĆa segment of the North Anatolian Fault using an old geodetic network
Seismic site characterization of the Kastelli (Kissamos) Basin in northwest Crete (Greece): Assessments using ambient noise recordings
Crete is actively seismic and site response studies are needed for estimating local site conditions subjected to seismic activity. In order to collect basic data, we performed ambient noise recordings to estimate the site response of the surface and near subsurface structure of the small-scale Kastelli Basin in northwest Crete. The spatial horizontal to vertical spectral ratios (HVSR) resonance pattern of the investigated sites in the centre of the Basin consists of either one or two peaks divided into low to high frequency range in different sites as follows: (a) in some sites only one amplified peak at low frequencies (0.6â1.2 Hz), (b) in other sites only one amplified peak at medium frequencies (2.9â8.5 Hz) and (c) in yet other sites two amplified peaks in the low to high frequency range (0.6â15.5 Hz). The investigated sites are amplified in the frequency range 0.6â15.5 Hz, while the amplitude reaches to a factor of 4 in the spectral ratios. The one HVSR amplified peak at low frequencies is related to locally soft or thick Quaternary deposits. Microtremors were measured in the coastal northwest part of the Basin in a wellâlithified Cretaceous limestone site characterized by fractures and faults striking predominantly in a sector NNE to NNW. Sites of one amplified peak at medium frequencies are extended from coastal northwest to southwest delineating a structure striking to NNW. The two amplified peaks are attributed to shallow subsurface heterogeneities/irregularities, locally induced by fault zones and to the overlying Quaternary deposits. Spatial HVSR variations in the frequency and HVSR shape delineate four structures striking NNE, NNW and in a sector NW to WNW, crosscutting the dense populated Basin suggesting that microtremors could be a valuable tool for providing a first approximation of fault zone delineation at least for the Kastelli-Kissamos Basin. The Basin is classified into the X soil category of the Greek Seismic Code 2000.This work was implemented through the project entitled âInterdisciplinary Multi-Scale
Research of Earth-quake Physics and Seismotectonics at the Front of the Hellenic Arc (IMPACT-ARC)â in
the framework of action âARCHIMEDES IIIâSupport of Research Teams at TEI of Creteâ (MIS380353)
of the Operational Program âEducation and Lifelong Learningâ and is co-financed by the European Union
(European Social Fund) and Greek national fund
- âŠ