Development of a rhesus monkey lung geometry model and application to particle deposition in comparison to humans

The exposure-dose-response characterization of an inhalation hazard established in an animal species needs to be translated to an equivalent characterization in humans relative to comparable doses or exposure scenarios. Here, the first geometry model of the conducting airways for rhesus monkeys is developed based upon CT images of the conducting airways of a 6-month-old male, rhesus monkey. An algorithm was developed for adding the alveolar region airways using published rhesus morphometric data. The resultant lung geometry model can be used in mechanistic particle or gaseous dosimetry models. Such dosimetry models require estimates of the upper respiratory tract volume of the animal and the functional residual capacity, as well as of the tidal volume and breathing frequency of the animal. The relationship of these variables to rhesus monkeys of differing body weights was established by synthesizing and modeling published data as well as modeling pulmonary function measurements on 121 rhesus control animals. Deposition patterns of particles up to 10 μm in size were examined for endotracheal and and up to 5 μm for spontaneous breathing in infant and young adult monkeys and compared to those for humans. Deposition fraction of respirable size particles was found to be higher in the conducting airways of infant and young adult rhesus monkeys compared to humans. Due to the filtering effect of the conducting airways, pulmonary deposition in rhesus monkeys was lower than that in humans. Future research areas are identified that would either allow replacing assumptions or improving the newly developed lung model

Some recent efforts toward high density implosions

Some recent Livermore efforts towards achieving high-density implosions are presented. The implosion dynamics necessary to compress DT fuel to 10 to 100 times liquid density are discussed. Methods of diagnosing the maximum DT density for a specific design are presented along with results to date. The dynamics of the double-shelled target with an exploding outer shell are described, and some preliminary experimental results are presented

Development of a Hydroduct

This report presents the results of experiments on a device for producing thrust for underwater propulsion. The principle of the device is based on accelerating a large mass of water by expansion of a small mass of gas, the gas being injected continuously into the water. The investigation consisted of tests conducted on ducts of several different designs; varying the exit area of the duets, the water and gas flow, and the method of injecting and mixing the gas and water. Using hydrogen gas at a rate of 0.0165 lbs/sec at a water flow rate of 27.4 lbs/sec, a maximum gross thrust of 29.2 lbs was obtained. At this water flow rate the internal friction drag of the duct was 20.5 lbs, giving a net thrust of 8.7 lbs. The effective exhaust velocity for these flow rates was 56,900 ft/sec.. ThAt is equivalent to a specific impulse of 1,770 sec., whereas a good conventional rocket fuel would have a specific impulse of about 250 sec. At low gas flow rates an effective exhaust velocity of 296,000 ft/sec. was obtained. However, at this low gas rate the gross thrust was less than the internal friction drag of the duct. Effective exhaust velocity is defined as gross thrust divided by the mass flow rate of gas, and has the dimensions of velocity.</p

Development of a rhesus monkey lung geometry model and application to particle deposition in comparison to humans

The exposure-dose-response characterization of an inhalation hazard established in an animal species needs to be translated to an equivalent characterization in humans relative to comparable doses or exposure scenarios. Here, the first geometry model of the conducting airways for rhesus monkeys is developed based upon CT images of the conducting airways of a 6-month-old male, rhesus monkey. An algorithm was developed for adding the alveolar region airways using published rhesus morphometric data. The resultant lung geometry model can be used in mechanistic particle or gaseous dosimetry models. Such dosimetry models require estimates of the upper respiratory tract volume of the animal and the functional residual capacity, as well as of the tidal volume and breathing frequency of the animal. The relationship of these variables to rhesus monkeys of differing body weights was established by synthesizing and modeling published data as well as modeling pulmonary function measurements on 121 rhesus control animals. Deposition patterns of particles up to 10 μm in size were examined for endotracheal and and up to 5 μm for spontaneous breathing in infant and young adult monkeys and compared to those for humans. Deposition fraction of respirable size particles was found to be higher in the conducting airways of infant and young adult rhesus monkeys compared to humans. Due to the filtering effect of the conducting airways, pulmonary deposition in rhesus monkeys was lower than that in humans. Future research areas are identified that would either allow replacing assumptions or improving the newly developed lung model