A new dawn? The Roman Catholic Church and environmental issues

This is a PDF version of an article published in New Blackfriars© 1997. The definitive version is available at www.blackwell-synergy.com.This article discusses the stance of the Roman Catholic Church on environmental issues and argues that the Church tends to stay on the fringe rather than get involved. Some of the ways in which Roman Catholic theologians have incorporated environmental issues into theological reflection is discussed, as are environmental challenges facing the Church in Britain (conservation, resources, biodiversity, animal welfare, biotechnology, cooperate/individual ethics, environmental justice, economics/policy development, and global issues)

Is Infrainguinal Bypass Grafting Successful Following Failed Angioplasty?

ObjectivesAngioplasty is often used in the management of lower limb ischaemia and can reduce the need for infrainguinal bypass in some patients. There is an associated failure rate with this technique and bypass surgery is often used in this situation as a secondary limb salvage procedure. We aimed to evaluate the outcome of infrainguinal bypass grafting following failed attempt at angioplasty.MethodsAll cases of infrainguinal bypass at a single centre over a seven year period were identified and notes reviewed. Cases were divided into four groups according to their indication for surgery; acute ischaemia, chronic critical ischaemia, failed angioplasty and an ‘other’ group including aneurysmal disease and claudicants. The failed angioplasty group was compared with the other three groups. Survival analysis was performed using Kaplan Meier curves and groups compared in terms of long term patency and survival.ResultsPrimary patency was 61.2% in the failed angioplasty group at 12 months compared with 60.6% in the other groups (P=1.11). There was also no significant difference in primary patency at 60 months (50% vs 40.6%, P=0.26). Survival at 12 months was also comparable between the groups (failed angioplasty group 74.2% compared with 77.3% in the other groups, P=0.662) as was 60 months survival (33.3% and 35.4% respectively, P=0.166).DiscussionIn this study, outcome of infrainguinal bypass following failed angioplasty was comparable to outcome of surgery performed for another indication. This paper supports the use of distal bypass surgery for limb salvage in cases where minimal access techniques have failed

Re-assessing the importance of linear type traits in predicting genetic merit for survival in an aging Holstein-Friesian dairy cow population

peer-reviewedThe cumulative improvement achieved in the genetic merit for reproductive performance in dairy populations will likely improve dairy cow longevity; therefore, it is time to reassess whether linear type traits are still suitable predictors of survival in an aging dairy cow population. The objective of the present study was therefore to estimate the genetic correlations between linear type traits and survival from one parity to the next and, in doing so, evaluate if those genetic correlations change with advancing parity. After edits, 152,894 lactation survival records (first to ninth parity) were available from 52,447 Holstein-Friesian cows, along with linear type trait records from 52,121 Holstein-Friesian cows. A series of bivariate random regression models were used to estimate the genetic covariances between survival in different parities and each linear type trait. Heritability estimates for survival per parity ranged from 0.02 (SE = 0.004; first parity) to 0.05 (SE = 0.01; ninth parity). Pairwise genetic correlations between survival among different parities varied from 0.42 (first and ninth parity) to 1.00 (eighth to ninth parity), with the strength of these genetic correlations being inversely related to the interval between the compared parities. The genetic correlations between survival and the individual linear type traits varied across parities for 9 of the 20 linear type traits examined, but the correlations with only 3 of these linear type traits strengthened as the cows aged; these 3 traits were rear udder height, teat length, and udder depth. Given that linear type traits are frequently scored in first parity and are genetically correlated with survival in older parities, they may be suitable early predictors of survival, especially for later parity cows. Additionally, the direction of the genetic correlations between survival and rear udder height, teat length, and udder depth did not change between parities; hence, selection for survival in older parities using these linear type traits should not hinder genetic improvement for survival in younger parities

Exploiting genetic variability in the trajectory of lactation yield and somatic cell score with each progressing parity

peer-reviewedThe inclusion of reproductive performance in dairy cow breeding schemes has resulted in a cumulative improvement in genetic merit for reproductive performance; this improvement should manifest in longer productive lives through a reduced requirement for involuntary culling. Nonetheless, the average length of dairy cow productive life has not changed in most populations, suggesting that risk factors for culling, especially in older cows, are possibly more associated with lower yield or high somatic cell score (SCS) than compromised reproductive performance. The objective of the present study was to understand the dynamics of lactation yields and SCS in dairy cows across parities and, in doing so, quantify the potential to alter this trajectory through breeding. After edits, 3,470,520 305-d milk, fat, and protein yields, as well as milk fat and protein percentage and somatic cell count records from 1,162,473 dairy cows were available for analysis. Random regression animal models were used to identify the parity in which individual cows reached their maximum lactation yields, and highest average milk composition and SCS; also estimated from these models were the (co)variance components for yield, composition, and SCS per parity across parities. Estimated breeding values for all traits per parity were calculated for cows reaching ≥fifth parity. Of the cows included in the analyses, 91.0%, 92.2%, and 83.4% reached maximum milk, fat, and protein yield in fifth parity, respectively. Conversely, 95.9% of cows reached their highest average fat percentage in first parity and 62.9% of cows reached their highest average protein percentage in third parity. In contrast to both milk yield and composition traits, 98.4% of cows reached their highest average SCS in eighth parity. Individual parity estimates of heritability for milk yield traits, milk composition, and SCS ranged from 0.28 to 0.44, 0.47 to 0.69, and 0.13 to 0.23, respectively. The strength of the genetic correlations per trait among parities was inversely related to the interval between the parities compared; the weakest genetic correlation was 0.67 (standard error = 0.02) between milk yield in parities 1 and 8. Eigenvalues and eigenfunctions of the additive genetic covariance matrices for all investigated traits revealed potential to alter the trajectory of parity profiles for milk yield, milk composition, and SCS. This was further demonstrated when evaluating the trajectories of animal estimated breeding values per parity

Structural and dielectric properties of Sr2_{2}TiO4_{4} from first principles

We have investigated the structural and dielectric properties of Sr$_{2}$TiO$_{4}$,the first member of the Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ Ruddlesden-Popper series, within density functional theory. Motivated by recent work in which thin films of Sr$_{2}$TiO$_{4}$ were grown by molecular beam epitaxy (MBE) on SrTiO$_{3}$ substrates, the in-plane lattice parameter was fixed to the theoretically optimized lattice constant of cubic SrTiO$_{3}$ (n=$\infty$), while the out-of-plane lattice parameter and the internal structural parameters were relaxed. The fully relaxed structure was also investigated. Density functional perturbation theory was used to calculate the zone-center phonon frequencies, Born effective charges, and the electronic dielectric permittivity tensor. A detailed study of the contribution of individual infrared-active modes to the static dielectric permittivity tensor was performed. The calculated Raman and infrared phonon frequencies were found to be in agreement with experiment where available. Comparisons of the calculated static dielectric permittivity with experiments on both ceramic powders and epitaxial thin films are discussed.Comment: 11 pages, 1 figure, 8 tables, submitted to Phys. Rev.

The Layer 0 Inner Silicon Detector of the D0 Experiment

This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respectively from the beam axis. The sensors and readout electronics are mounted on a specially designed and fabricated carbon fiber structure that includes cooling for sensor and readout electronics. The structure has a thin polyimide circuit bonded to it so that the circuit couples electrically to the carbon fiber allowing the support structure to be used both for detector grounding and a low impedance connection between the remotely mounted hybrids and the sensors.Comment: 28 pages, 9 figure

A VALUE PLATFORM ANALYSIS PERSPECTIVE ON CUSTOMER ACCESS INFORMATION TECHNOLOGY

Customer access information technologies (CAITs) provide a link between a firm and its customers. Firms invest in CAITs to reduce costs, increase revenues and market share, lock in existing customers and capture new ones. These benefits, however, are notoriously difficult to measure. This paper proposes an evaluative method for CAlT deployment called value platform analysis, that is based on a conceptual model drawn from the theory of retail outlet deployment in marketing science. The model focuses on the impact of CAIT features and environmental features on transactions generated by the CAIT. Specific econometric models are developed for deployment. Hypotheses regarding the likely impact of automated teller machine (ATM) location design choices and environmental features on ATM transactions are evaluated. The results indicate that there are a number of key features influencing ATM performance. Two distinct ATM deployment scenarios emerge: one for servicing a bank's own customers, and another for providing transaction services for customers for a fee.Information Systems Working Papers Serie

Control de cambios / Rastrea los cambios / El camino cambia: Reflexiones sobre un mundo en transformación

“Track changes: Reflecting on a transforming world” was the theme chosen to invite panels, papers, posters and alternative presentations to be part of the 2019 international congress of SIEF that was held in Santiago de Compostela, Galicia (Spain). This introduction includes a description of the content of the congress, the rationale of the choice of plenaries and some reflections about the outcomes of the congress.El lema elegido para presentar paneles, ponencias, posters y presentaciones en formatos alternativos para el congreso internacional 2019 de SIEF -que tuvo lugar en Santiago de Compostela, Galicia (España)- fue “Track changes: Reflecting on a transforming world”. Esta introducción incluye una descripción del contenido del congreso, la idea para la elección de las plenarias y algunas reflexiones sobre los resultados del congreso. &nbsp