A laboratory facility to study gas-aerosol-cloud interactions in a turbulent environment: The Π Chamber

A detailed understanding of interactions of aerosols, cloud droplets/ice crystals, and trace gases within the atmosphere is of prime importance for an accurate understanding of Earth’s weather and climate. One aspect that remains especially vexing is that clouds are ubiquitously turbulent, and therefore thermodynamic and compositional variables, such as water vapor supersaturation, fluctuate in space and time. With these problems in mind, a multiphase, turbulent reaction chamber—called the Π chamber because of the internal volume of 3.14 m3 with the cylindrical insert installed—has been developed. It is capable of pressures ranging from 1,000 to –60 hPa and can sustain temperatures of –55° to 55°C, thereby spanning much of the range of tropospheric clouds. To control the relative humidity in the chamber, it can be operated with a stable, unstable, or neutral temperature difference between the top and bottom surfaces, with or without expansion. A negative temperature difference induces turbulent Rayleigh–Bénard convection and associated supersaturation generation through isobaric mixing. Supporting instrumentation includes a suite of aerosol generation and characterization techniques; temperature, pressure, and humidity sensors; and a phase Doppler interferometer. Initial characterization experiments demonstrate the ability to sustain steady-state turbulent cloud conditions for times greater than 1 day, with droplet diameters typically in the range of 5–40 µm. Typical turbulence has root-mean-square velocity fluctuations on the order of 10 cm s–1 and kinetic energy dissipation rates of 1 × 10–3 W kg–1

Ice cloud formation potential by free tropospheric particles from long-range transport over the Northern Atlantic Ocean

Long-range transported free tropospheric particles can play a significant role on heterogeneous ice nucleation. Using optical and electron microscopy we examine the physicochemical characteristics of ice nucleating particles (INPs). Particles were collected on substrates from the free troposphere at the remote Pico Mountain Observatory in the Azores Islands, after long-range transport and aging over the Atlantic Ocean. We investigate four specific events to study the ice formation potential by the collected particles with different ages and transport patterns. We use single-particle analysis, as well as bulk analysis to characterize particle populations. Both analyses show substantial differences in particle composition between samples from the four events; in addition, single-particle microscopy analysis indicates that most particles are coated by organic material. The identified INPs contained mixtures of dust, aged sea salt and soot, and organic material acquired either at the source or during transport. The temperature and relative humidity (RH) at which ice formed, varied only by 5% between samples, despite differences in particle composition, sources, and transport patterns. We hypothesize that this small variation in the onset RH may be due to the coating material on the particles. This study underscores and motivates the need to further investigate how long-range transported and atmospherically aged free tropospheric particles impact ice cloud formatio

The Digital Image Correlation technique applied to the deformation behavior of welded sheet joints

The existence of a welded zone generally influences the local strain and stress distribution especially in case of welding defects. A method able to measure the local deformability can hence give many important information about the real stress and strain fields useful to improve the welded structure design. In this experimental work, some new generation automotive steels have been considered, because of the well known welding problems due to their unstable microstructural condition. Such materials, known as Q&P steels and available only as thin sheets, require a suitable quenching process able to give high mechanical resistance and satisfying deformability. Some sheet samples were welded by electron beam technique, because it is able to reduce the width of the heat affected zone where the main microstructural changes are concentrated. From such samples, tensile specimens were machined. During the tensile tests, the deformations were measured both by a traditional extensometer and by a 3D Digital Image Correlation (3D DIC) technique. A preliminary investigation of the melted and the heat affected zones resulted in small dimensions (about 10 mm) and hence the measuring setup has been optimized in order maximize the achievable measuring resolution minimizing the resulting uncertainty. This result can be achieved by a pattern generated by a suitable software and by an accurate preparation of the surface where the pattern will be deposited on

Former Foodstuff Products (FFPs) as Circular Feed: Types of Packaging Remnants and Methods for Their Detection

Alternative feed ingredients in farm animal diets are a sustainable option from several perspectives. Former food products (FFPs) provide an interesting case study, as they represent a way of converting food industry losses into ingredients for the feed industry. A key concern regarding FFPs is the possible packaging residues that can become part of the product, leading to potential contamination of the feed. Although the level of contamination has been reported as negligible, to ensure a good risk evaluation and assessment of the presence of packaging remnants in FFPs, several techniques have been proposed or are currently being studied, of which the main ones are summarized in this review. Accordingly visual inspections, computer vision (CV), multivariate image analysis (MIA), and electric nose (e-nose) are discussed. All the proposed methods work mainly by providing qualitative results, while further research is needed to quantify FFP-derived packaging remnants in feed and to evaluate feed safety as required by the food industries

Modelling the hygroscopic growth factors of aerosol material containing a large water-soluble organic fraction, collected at the Storm Peak Laboratory

The compositions of six aggregated aerosol samples from the Storm Peak site have been comprehensively analysed (Hallar et al., 2013), focusing particularly on the large water-extractable organic fraction which consists of both high molecular weight organic compounds and a range of acids and sugar-alcohols. The contribution of the soluble organic fraction of atmospheric aerosols to their hygroscopicity is hard to quantify, largely because of the lack of a detailed knowledge of both composition and the thermodynamic properties of the functionally complex compounds and structures the fraction contains. In this work we: (i) develop a means of predicting the relative solubility of the compounds in the water-extractable organic material from the Storm Peak site, based upon what is known about their chemical composition; (ii) derive the probable soluble organic fraction from comparisons of model predictions with the measured hygroscopicity; (iii) test a model of the water uptake of the total aerosol (inorganic plus total water-extractable organic compounds). Using a novel UNIFAC-based method, different assignments of functional groups to the high molecular weight water soluble organic compounds (WSOC) were explored, together with their effects on calculated hygroscopic growth factors, constrained by the known molecular formulae and the double bond equivalents associated with each molecule. The possible group compositions were compared with the results of ultrahigh resolution mass spectrometry measurements of the organic material, which suggest large numbers of alcohol (–OH) and acid (–COOH) groups. A hygroscopicity index (HI) was developed. The measured hygroscopic growth is found to be consistent with a dissolution of the WSOC material that varies approximately linearly with RH, such that the dissolved fraction is about 0.45–0.85 at 90% relative humidity when ordering by HI, depending on the assumptions made. This relationship, if it also applies to other types of organic aerosol material, provides a simple approach to calculating both water uptake and CCN activity (and the κ parameter for hygroscopic growth). The hygroscopicity of the total aerosol was modelled using a modified Zdanovskii-Stokes-Robinson approach as the sum of that of the three analysed fractions: inorganic ions (predicted), individual organic acids and “sugar alcohols” (predicted), and the high molecular weight WSOC fraction (measured). The calculated growth factors broadly agree with the measurements, and validate the approach taken. The insights into the dissolution of the organic material seem likely to apply to other largely biogenic aerosols from similar remote locations

Anti-oxidant potential and gap junction-mediated intercellular communication as early biological markers of mercuric chloride toxicity in MDCK cell line.

In this study, the early nephrotoxic potential of mercuric chloride (HgCl(2)) has been evaluated in vitro, by exposing a renal-derived cell system, the tubular epithelial Madin-Darby canine kidney (MDCK) cell line, to the presence of increasing HgCl(2) concentrations (0.1-100 microM) for different periods of time (from 4 to 72 h). As possible biological markers of the tubular-specific toxicity of HgCl(2) in exposed-MDCK cultures we analysed: (i) critical biochemical parameters related to oxidative stress conditions and (ii) gap-junctional function (GJIC). HgCl(2) cytotoxicity was evaluated by cell-density assay. The biochemical analysis of the pro-oxidant properties of the mercuric ion (Hg(2+)) was performed by evaluating the effect of the metal salt on the antioxidant status of the MDCK cells. The cell glutathione (GSH) content and the activity of glutathione peroxidase (Gpx) and catalase (Cat), two enzymes engaged in the H(2)O(2) degradation, were quantified. HgCl(2) influence on MDCK GJIC was analysed by the microinjection/dye-transfer assay. HgCl(2)-induced morphological changes in MDCK cells were also taken into account. Our results, proving that subcytotoxic (0.1-10 microM) HgCl(2) concentrations affect either the antioxidant defences of MDCK cells or their GJIC, indicate these critical functions as suitable biological targets of early mercury-induced tubular cell injury

Dynamics of an Inelastic Gravitational Billiard with Rotation

The seminal physical model for investigating formulations of nonlinear dynamics is the billiard. Gravitational billiards provide an experimentally accessible arena for their investigation. We present a mathematical model that captures the essential dynamics required for describing the motion of a realistic billiard for arbitrary boundaries, where we include rotational effects and additional forms of energy dissipation. Simulations of the model are applied to parabolic, wedge and hyperbolic billiards that are driven sinusoidally. The simulations demonstrate that the parabola has stable, periodic motion, while the wedge and hyperbola (at high driving frequencies) appear chaotic. The hyperbola, at low driving frequencies, behaves similarly to the parabola; i.e., has regular motion. Direct comparisons are made between the model's predictions and previously published experimental data. The value of the coefficient of restitution employed in the model resulted in good agreement with the experimental data for all boundary shapes investigated. It is shown that the data can be successfully modeled with a simple set of parameters without an assumption of exotic energy dependence.Comment: 11 pages, 11 figures. arXiv admin note: substantial text overlap with arXiv:1103.443

Evaluation of organic markers for chemical mass balance source apportionment at the Fresno Supersite

International audienceSources of PM2.5 at the Fresno Supersite during high PM2.5 episodes occurring from 15 December 2000?3 February 2001 were estimated with the Chemical Mass Balance (CMB) receptor model. The ability of source profiles with organic markers to distinguish motor vehicle, residential wood combustion (RWC), and cooking emissions was evaluated with simulated data. Organics improved the distinction between gasoline and diesel vehicle emissions and allowed a more precise estimate of the cooking source contribution. Sensitivity tests using average ambient concentrations showed that the gasoline vehicle contribution was not resolved without organics. Organics were not required to estimate hardwood contributions. The most important RWC marker was the water-soluble potassium ion. The estimated cooking contribution did not depend on cholesterol because its concentrations were below the detection limit in most samples. Winter time source contributions were estimated by applying the CMB model to individual and average sample concentrations. RWC was the largest source, contributing 29?31% of measured PM2.5. Hardwood and softwood combustion accounted for 16?17% and 12?15%, respectively. Secondary ammonium nitrate and motor vehicle emissions accounted for 31?33% and 9?15%, respectively. The gasoline vehicle contribution (3?10%) was comparable to the diesel vehicle contribution (5?6%). The cooking contribution was 5?19% of PM2.5. Fresno source apportionment results were consistent with those estimated in previous studies

Human iPSC-Derived 3D Hepatic Organoids in a Miniaturized Dynamic Culture System

The process of identifying and approving a new drug is a time-consuming and expensive procedure. One of the biggest issues to overcome is the risk of hepatotoxicity, which is one of the main reasons for drug withdrawal from the market. While animal models are the gold standard in preclinical drug testing, the translation of results into therapeutic intervention is often ambiguous due to interspecies differences in hepatic metabolism. The discovery of human induced pluripotent stem cells (hiPSCs) and their derivatives has opened new possibilities for drug testing. We used mesenchymal stem cells and hepatocytes both derived from hiPSCs, together with endothelial cells, to miniaturize the process of generating hepatic organoids. These organoids were then cultivated in vitro using both static and dynamic cultures. Additionally, we tested spheroids solely composed by induced hepatocytes. By miniaturizing the system, we demonstrated the possibility of maintaining the organoids, but not the spheroids, in culture for up to 1 week. This timeframe may be sufficient to carry out a hypothetical pharmacological test or screening. In conclusion, we propose that the hiPSCderived liver organoid model could complement or, in the near future, replace the pharmacological and toxicological tests conducted on animals