Variational approximations to homoclinic snaking

We investigate the snaking of localised patterns, seen in numerous physical applications, using a variational approximation. This method naturally introduces the exponentially small terms responsible for the snaking structure, that are not accessible via standard multiple-scales asymptotic techniques. We obtain the symmetric snaking solutions and the asymmetric 'ladder' states, and also predict the stability of the localised states. The resulting approximate formulas for the width of the snaking region show good agreement with numerical results.Comment: 4 pages, 3 figures, submitte

Experimental verification of reciprocity relations in quantum thermoelectric transport

Symmetry relations are manifestations of fundamental principles and constitute cornerstones of modern physics. An example are the Onsager relations between coefficients connecting thermodynamic fluxes and forces, central to transport theory and experiments. Initially formulated for classical systems, these reciprocity relations are also fulfilled in quantum conductors. Surprisingly, novel relations have been predicted specifically for thermoelectric transport. However, whereas these thermoelectric reciprocity relations have to date not been verified, they have been predicted to be sensitive to inelastic scattering, always present at finite temperature. The question whether the relations exist in practice is important for thermoelectricity: whereas their existence may simplify the theory of complex thermoelectric materials, their absence has been shown to enable, in principle, higher thermoelectric energy conversion efficiency for a given material quality. Here we experimentally verify the thermoelectric reciprocity relations in a four-terminal mesoscopic device where each terminal can be electrically and thermally biased, individually. The linear response thermoelectric coefficients are found to be symmetric under simultaneous reversal of magnetic field and exchange of injection and emission contacts. Intriguingly, we also observe the breakdown of the reciprocity relations as a function of increasing thermal bias. Our measurements thus clearly establish the existence of the thermoelectric reciprocity relations, as well as the possibility to control their breakdown with the potential to enhance thermoelectric performanceComment: 7 pages, 5 figure

Fluxon analogues and dark solitons in linearly coupled Bose-Einstein condensates

Two effectively one-dimensional parallel coupled Bose-Einstein condensates in the presence of external potentials are studied. The system is modelled by linearly coupled Gross-Pitaevskii equations. In particular, grey-soliton-like solutions representing analogues of superconducting Josephson fluxons as well as coupled dark solitons are discussed. Theoretical approximations based on variational formulations are derived. It is found that the presence of a magnetic trap can destabilize the fluxon analogues. However, stabilization is possible by controlling the effective linear coupling between the condensates.Comment: 14 pages, 7 figures, The paper is to appear in Journal of Physics

The structure of an LIM-only protein 4 (LMO4) and deformed epidermal autoregulatory factor-1 (DEAF1) complex reveals a common mode of binding to LMO4

LIM-domain only protein 4 (LMO4) is a widely expressed protein with important roles in embryonic development and breast cancer. It has been reported to bind many partners, including the transcription factor Deformed epidermal autoregulatory factor-1 (DEAF1), with which LMO4 shares many biological parallels. We used yeast two-hybrid assays to show that DEAF1 binds both LIM domains of LMO4 and that DEAF1 binds the same face on LMO4 as two other LMO4-binding partners, namely LIM domain binding protein 1 (LDB1) and C-terminal binding protein interacting protein (CtIP/RBBP8). Mutagenic screening analysed by the same method, indicates that the key residues in the interaction lie in LMO4LIM2 and the N-terminal half of the LMO4-binding domain in DEAF1. We generated a stable LMO4LIM2-DEAF1 complex and determined the solution structure of that complex. Although the LMO4-binding domain from DEAF1 is intrinsically disordered, it becomes structured on binding. The structure confirms that LDB1, CtIP and DEAF1 all bind to the same face on LMO4. LMO4 appears to form a hub in protein-protein interaction networks, linking numerous pathways within cells. Competitive binding for LMO4 therefore most likely provides a level of regulation between those different pathways.SJ was funded by an Australian Postgraduate Award (education.gov.au/australian-postgraduate-awards). JPM and JMM were awarded Senior Research Fellowships from the Australian National and Medical Research Council (www.nhmrc.gov.au). This project was funded by an Australian Research Council (www. arc.gov.au) Discovery Project Grant (DP110104332) to JMM and LC

Magnetic Field Structure around Low-Mass Class 0 Protostars: B335, L1527 and IC348-SMM2

We report new 350 micron polarization observations of the thermal dust emission from the cores surrounding the low-mass, Class 0 YSOs L1527, IC348-SMM2 and B335. We have inferred magnetic field directions from these observations, and have used them together with results in the literature to determine whether magnetically regulated core-collapse and star-formation models are consistent with the observations. These models predict a pseudo-disk with its symmetry axis aligned with the core magnetic field. The models also predict a magnetic field pinch structure on a scale less than or comparable to the infall radii for these sources. In addition, if the core magnetic field aligns (or nearly aligns) the core rotation axis with the magnetic field before core collapse, then the models predict the alignment (or near alignment) of the overall pinch field structure with the bipolar outflows in these sources. We show that if one includes the distorting effects of bipolar outflows on magnetic fields, then in general the observational results for L1527 and IC348-SMM2 are consistent with these magnetically regulated models. We can say the same for B335 only if we assume the distorting effects of the bipolar outflow on the magnetic fields within the B335 core are much greater than for L1527 and IC348-SMM2. We show that the energy densities of the outflows in all three sources are large enough to distort the magnetic fields predicted by magnetically regulated models.Comment: Accepted for publication in The Astrophysical Journa

Supplmentary Feeding and Management Strategies to Overcome Drought Situations on Three High Producing New Zealand Seasonal Dairy Farms

This paper investigates the outcomes of the management strategies to overcome dry summer conditions on three New Zealand seasonal supply dairy farms where the summer management philosophy is towards production rather than survival aimed at giving the farmer control rather than accepting the unreliable production outcomes often achieved. Actual data collected from the case farms as part of a large on-farm monitoring programme was used to model the dry 1998/99 season. This was compared with simulated models for an average season to estimate milksolids responses (g milksolids (MS)/kg DM) and net returns (cents/kg DM) to the additional feeds used. In response to a 30% reduction in summer pasture growth, farmers fed more additional feeds (542 kg DM/ha) and achieved fewer lactation days/ha resulting a reduction of 12.5% in per cow and 19.8% in per hectare milksolids production. The average response achieved to the addition feed was 104g MS/kg DM at a net return of 20.6cents/kg DM fed above the cost of additional feed. It was concluded that the management strategies achieved the target of having cows in good condition and at a satisfactory level of production at the end of summer to enable autumn milk production to be captured and that farmers should look at further increasing the level of supplement fed in dry summer conditions

High power operation of an X-band gyrotwistron

We report the first experimental verification of a gyrotwistron amplifier. The device utilized a single 9.858 GHz, TE011 cavity, a heavily attenuated drift tube, and a long tapered output waveguide section. With a 440 kV, 200-245 A, 1 μs electron beam and a sharply tapered axial magnetic field, peak powers above 21 MW were achieved with a gain near 24 dB. Performance was limited by competition from a fundamental TE11 mode. A multimode code was developed to analyze this system, and simulations were in good agreement with the experiment

Computer generated animation and movie production at LARC: A case study

The process of producing computer generated 16mm movies using the MOVIE.BYU software package developed by Brigham Young University and the currently available hardware technology at the Langley Research Center is described. A general overview relates the procedures to a specific application. Details are provided which describe the data used, preparation of a storyboard, key frame generation, the actual animation, title generation, filming, and processing/developing the final product. Problems encountered in each of these areas are identified. Both hardware and software problems are discussed along with proposed solutions and recommendations

Kheti: mobile multimedia in an agricultural co-operative

Kheti is a mobile phone-based, multimedia communication system to support sharing of agricultural knowledge and advice within a producers' co-operative. The first version of this system was designed with, and was tested by, the Sironj Crop Producers Company Ltd, a co-operative of small farmers working in Madhya Pradesh, Central India. In this paper, we describe the Kheti system and examine how it addresses the problems of making agricultural knowledge available by recognizing that practical knowledge is always located within a complex network of social relations and practices. We also examine the results of field trials and some of the challenges in seeking to convert a successful technology into a sustainable development intervention. © 2010 Springer-Verla

SMP: A solid modeling program version 2.0

The Solid Modeling Program (SMP) provides the capability to model complex solid objects through the composition of primitive geometric entities. In addition to the construction of solid models, SMP has extensive facilities for model editing, display, and analysis. The geometric model produced by the software system can be output in a format compatible with existing analysis programs such as PATRAN-G. The present version of the SMP software supports six primitives: boxes, cones, spheres, paraboloids, tori, and trusses. The details for creating each of the major primitive types is presented. The analysis capabilities of SMP, including interfaces to existing analysis programs, are discussed