34 research outputs found
MRI Sequence Influences Geometrical Information of Osseous Tissues
Although CT-scan data gives accurate geometrical information of bones, MRI data is commonly used instead due to its non-ionizing nature. The geometrical information has a number of applications, including image registration and computer simulations of the human joints, presurgical planning, prosthesis design, linking geometry with function and pain and kinematics. Hence, it is important to for the geometrical information extracted from the MRI data to be accurate. However, this information is influenced by the choice of the MRI sequence. Therefore, the aim of this study is to investigate the effect of different MRI sequences on the accuracy of geometrical information of bones
Structural Repertoire of HIV-1-Neutralizing Antibodies Targeting the CD4 Supersite in 14 Donors
The site on the HIV-1 gp120 glycoprotein that binds the CD4 receptor is recognized by broadly reactive antibodies, several of which neutralize over 90% of HIV-1 strains. To understand how antibodies achieve such neutralization, we isolated CD4-binding-site (CD4bs) antibodies and analyzed 16 co-crystal structures –8 determined here– of CD4bs antibodies from 14 donors. The 16 antibodies segregated by recognition mode and developmental ontogeny into two types: CDR H3-dominated and VH-gene-restricted. Both could achieve greater than 80% neutralization breadth, and both could develop in the same donor. Although paratope chemistries differed, all 16 gp120-CD4bs antibody complexes showed geometric similarity, with antibody-neutralization breadth correlating with antibody-angle of approach relative to the most effective antibody of each type. The repertoire for effective recognition of the CD4 supersite thus comprises antibodies with distinct paratopes arrayed about two optimal geometric orientations, one achieved by CDR H3 ontogenies and the other achieved by VH-gene-restricted ontogenies
Three-dimensional magnetic resonance imaging of physeal injury: reliability and clinical utility
BACKGROUND: Injuries to the physis are common in children with a subset resulting in an osseous bar and potential growth disturbance. Magnetic resonance imaging allows for detailed assessment of the physis with the ability to generate 3-dimensional physeal models from volumetric data. The purpose of this study was to assess the interrater reliability of physeal bar area measurements generated using a validated semiautomated segmentation technique and to highlight the clinical utility of quantitative 3-dimensional (3D) physeal mapping in pediatric orthopaedic practice. METHODS: The Radiology Information System/Picture Archiving Communication System (PACS) at our institution was searched to find consecutive patients who were imaged for the purpose of assessing a physeal bar or growth disturbance between December 2006 and October 2011. Physeal segmentation was retrospectively performed by 2 independent operators using semiautomated software to generate physeal maps and bar area measurements from 3-dimensional spoiled gradient recalled echo sequences. Inter-reliability was statistically analyzed. Subsequent surgical management for each patient was recorded from the patient notes and surgical records. RESULTS: We analyzed 24 patients (12M/12F) with a mean age of 11.4 years (range, 5-year to 15-year olds) and 25 physeal bars. Of the physeal bars: 9 (36%) were located in the distal tibia; 8 (32%) in the proximal tibia; 5 (20%) in the distal femur; 1 (4%) in the proximal femur; 1 (4%) in the proximal humerus; and 1 (4%) in the distal radius. The independent operator measurements of physeal bar area were highly correlated with a Pearson correlation coefficient (r) of 0.96 and an intraclass correlation coefficient for average measures of 0.99 (95% confidence interval, 0.97-0.99). Four patients underwent resection of the identified physeal bars, 9 patients were treated with epiphysiodesis, and 1 patient underwent bilateral tibial osteotomies. CONCLUSIONS: Semiautomated segmentation of the physis is a reproducible technique for generating physeal maps and accurately measuring physeal bars, providing quantitative and anatomic information that may inform surgical management and prognosis in patients with physeal injury
Finite Element Modeling of Planus and Rectus Foot Types for the Study of First Metatarsophalangeal and First Metatarsocuneiform Joint Contact Mechanics
The foot is a highly complex biomechanical system for which finite element (FE) modeling has been used to evaluate its loading environment. However, there is limited knowledge of first metatarsophalangeal (MTP) and first metatarsocuneiform (MTC) joint contact mechanics. Our goal was to develop a framework for FE modeling of the medial forefoot which could accurately predict experimental measurements of first MTP and first MTC joint loading. Simulations of planus and rectus foot types were conducted for midstance of gait. A custom-built force-controlled cadaveric test-rig was used to derive intracapsular pressure sensor measurements of contact pressure, force, and area during quasi-static loading. The FE model was driven under the same boundary and loading conditions as the cadaver. Mesh sensitivity analyses and best-fit calibrations of moduli for first MTP and first MTC joint cartilage were performed. Consistent with previous experimental research, a lower compressive modulus was best-fit to the first MTP compared to first MTC joint at 10 MPa and 20 MPa, respectively. Mean errors in contact pressures, forces, and areas were 24%, 4%, and 40% at the first MTP joint and 23%, 12%, and 19% at the first MTC joint, respectively. The present developmental framework may provide a basis for future modeling of first MTP and first MTC joint contact mechanics. This study acts as a precursor to validation of realistic physiological loading across gait to investigate joint loading, foot type biomechanics, and surgical interventions of the medial forefoot
Assessment of osteonecrosis in the presence of instrumentation for femoral neck fracture using contrast-enhanced mavric sequence
BACKGROUND Evaluating postoperative femoral neck facture (FNF) with metal fixation hardware is commonly performed using radiographs. MRI has greater sensitivity and specificity to evaluate osteonecrosis (ON) but is often challenging due to the image distortion caused by metallic hardware. QUESTIONS/PURPOSES The aim of this study is to compare fast spin-echo (FSE) and multi-acquisition variable-resonance image combination (MAVRIC) sequences in assessing ON following metallic fixation of FNF and determining feasibility of semi-quantitative perfusion using MAVRIC. METHODS Radiography and MRI were performed at 3 and 12 months postoperatively, using FSE and pre- and post-gadolinium contrast MAVRIC sequences in 21 FNF patients. The presence and volume of ON were recorded. Signal intensity (SI) enhancement was measured on the MAVRIC sequences within the center and rim of ON; with the ilium and femoral diaphysis as controls. The detection rate of ON between MAVRIC and FSE images was evaluated as the difference of percent enhancement across the defined regions of interest. RESULTS ON was detected in 0% of radiographs, in 67% of FSE, and in 76% of MAVRIC images at 3 months follow-up, with similar results at 12 months. MAVRIC images had larger ON volume than FSE images at both time points. A significant percentage SI enhancement was only detected in the ON rim. CONCLUSION Radiographs could not detect ON following metallic fixation of FNF. MAVRIC is more sensitive than FSE for determining the volume of ON. SI measurements using MAVRIC may provide an indirect assessment of perfusion
Recommended from our members
Multiparametric MRI characterization of knee articular cartilage and subchondral bone shape in collegiate basketball players.
Magnetic resonance imaging (MRI) is commonly used to evaluate the morphology of the knee in athletes with high-knee impact; however, complex repeated loading of the joint can lead to biochemical and structural degeneration that occurs before visible morphological changes. In this study, we utilized multiparametric quantitative MRI to compare morphology and composition of articular cartilage and subchondral bone shape between young athletes with high-knee impact (basketball players; n = 40) and non-knee impact (swimmers; n = 25). We implemented voxel-based relaxometry to register all cases to a single reference space and performed a localized compositional analysis of T 1ρ - and T 2 -relaxation times on a voxel-by-voxel basis. Additionally, statistical shape modeling was employed to extract differences in subchondral bone shape between the two groups. Evaluation of cartilage composition demonstrated a significant prolongation of relaxation times in the medial femoral and tibial compartments and in the posterolateral femur of basketball players in comparison to relaxation times in the same cartilage compartments of swimmers. The compositional analysis also showed depth-dependent differences with prolongation of the superficial layer in basketball players. For subchondral bone shape, three total modes were found to be significantly different between groups and related to the relative sizes of the tibial plateaus, intercondylar eminences, and the curvature and concavity of the patellar lateral facet. In summary, this study identified several characteristics associated with a high-knee impact which may expand our understanding of local degenerative patterns in this population