Optimization of thermoplastic blend matrix HDPE/PLA with different types and levels of coupling agents

High-density polyethylene (HDPE) and poly(lactic) acid (PLA) blends with different ratios of both polymers, namely, 30:70, 50:50, and 70:30, were produced. Polyethylene-grafted maleic anhydride and a random copolymer of ethylene and glycidyl methacrylate were also considered as compatibilizers to modify HDPE/PLA optimal blends and were added in the amounts of 1, 3, and 5 wt.%. Different properties of the blends were evaluated by performing tensile tests and scanning electron microscopy to analyze blend and interfaces morphology. Moreover, thermomechanical analysis through differential scanning calorimetry, thermo-gravimetric analysis, and infrared spectroscopy were also performed. The blend containing equal amounts of HDPE and PLA seemed to present a good balance between amount of bio-derived charge and acceptable mechanical properties. This suggests that these blends have a good potential for the production of composites with lingo-cellulosic fillers

Addition of X-ray fluorescent tracers into polymers, new technology for automatic sorting of plastics : proposal for selecting some relevant tracers

A description of a new technology for automatic sorting of plastics, based on X-ray fluorescence detection of tracers, added in such materials is presented. This study describes the criteria for the selection of tracers, and concluded that the most adapted for XRF are some rare earth oxides. The plastics chosen for tracing and identification are the ones contained in ELV and WEEE from which discrimination is difficult for the existing sorting techniques due to their black colour.A description of a new technology for automatic sorting of plastics, based on X-ray fluorescence detection of tracers, added in such materials is presented. This study describes the criteria for the selection of tracers, and concluded that the most adapted for XRF are some rare earth oxides. The plastics chosen for tracing and identification are the ones contained in ELV and WEEE from which discrimination is difficult for the existing sorting techniques due to their black colour

A study on the dispersion, preparation, characterization and photo-degradation of polypropylene traced with rare earth oxides

This research work deals with the effect of rare earth oxides on the PP matrix with respect to the thermal and mechanical properties and to the photo-degradation under UV irradiation exposure. The rare earth oxides are used as tracers for the identification of polymer materials, in order to have an economically efficient recycling and high speed automatic sorting of plastic wastes. The addition of 0.1 wt% of such particles of a micrometric size has a minor effect on the mechanical and thermal properties of the traced materials, as well as on the photo-degradation of the polymer after UV irradiation exposure. For 1 wt% tracer content, before UV irradiation treatment, the melting and crystallization temperatures as well as the thermal stability of the PP matrix are slightly increased, whereas the elongation at break decreases from 10 to 50% for a cross-head speed of 250 mm/min. However, the addition of 1 wt% of CeO2 improves the photo-degradation resistance of the PP matrix to UV exposure due to the UV light screening effects offered by these particles. The SEM images together with the results obtained from image processing show a homogenous dispersion of tracers in the PP matrix.This research work deals with the effect of rare earth oxides on the PP matrix with respect to the thermal and mechanical properties and to the photo-degradation under UV irradiation exposure. The rare earth oxides are used as tracers for the identification of polymer materials, in order to have an economically efficient recycling and high speed automatic sorting of plastic wastes. The addition of 0.1 wt% of such particles of a micrometric size has a minor effect on the mechanical and thermal properties of the traced materials, as well as on the photo-degradation of the polymer after UV irradiation exposure. For 1 wt% tracer content, before UV irradiation treatment, the melting and crystallization temperatures as well as the thermal stability of the PP matrix are slightly increased, whereas the elongation at break decreases from 10 to 50% for a cross-head speed of 250 mm/min. However, the addition of 1 wt% of CeO2 improves the photo-degradation resistance of the PP matrix to UV exposure due to the UV light screening effects offered by these particles. The SEM images together with the results obtained from image processing show a homogenous dispersion of tracers in the PP matrix

A study on the dispersion, preparation, characterization and photo-degradation of polypropylene traced with rare earth oxides

This research work deals with the effect of rare earth oxides on the PP matrix with respect to the thermal and mechanical properties and to the photo-degradation under UV irradiation exposure. The rare earth oxides are used as tracers for the identification of polymer materials, in order to have an economically efficient recycling and high speed automatic sorting of plastic wastes. The addition of 0.1 wt% of such particles of a micrometric size has a minor effect on the mechanical and thermal properties of the traced materials, as well as on the photo-degradation of the polymer after UV irradiation exposure. For 1 wt% tracer content, before UV irradiation treatment, the melting and crystallization temperatures as well as the thermal stability of the PP matrix are slightly increased, whereas the elongation at break decreases from 10 to 50% for a cross-head speed of 250 mm/min. However, the addition of 1 wt% of CeO2 improves the photo-degradation resistance of the PP matrix to UV exposure due to the UV light screening effects offered by these particles. The SEM images together with the results obtained from image processing show a homogenous dispersion of tracers in the PP matrix.ANR TRIPTI

Addition of tracers into the polypropylene in view of automatic sorting of plastic wastes using X-ray fluorescence spectrometry

This study focused on the detection of rare earth oxides, used as tracers for the identification of polymer materials, using XRF (X-ray fluorescence) spectrometry. The tests were carried out in a test system device which allows the collection of static measurements of the samples’ spectrum through the use of energy dispersive X-ray fluorescence technology. A sorting process based on tracers added into the polymer matrix is proposed in order to increase sorting selectivity of polypropylene during end-of-life recycling. Tracers consist of systems formed by one or by several substances dispersed into a material, to add a selective property to it, with the aim of improving the efficiency of sorting and high speed identification. Several samples containing rare earth oxides (Y2O3, CeO2, Nd2O3, Gd2O3, Dy2O3, Er2O3 and Yb2O3) in different concentrations were prepared in order to analyse some of the parameters which can influence the detection, such as the concentration of tracers, the acquisition time and the possible overlapping among the tracers. This work shows that by using the XRF test system device, it was possible to detect 5 of the 7 tracers tested for 1 min exposure time and at a concentration level of 1000 ppm. These two parameters will play an important role in the development of an industrial device, which indicates the necessity of further works that needs to be conducted in order to reduce them.RECORD, ADEM

Addition of X-ray fluorescent tracers into polymers, new technology for automatic sorting of plastics : proposal for selecting some relevant tracers

A description of a new technology for automatic sorting of plastics, based on X-ray fluorescence detection of tracers, added in such materials is presented. This study describes the criteria for the selection of tracers, and concluded that the most adapted for XRF are some rare earth oxides. The plastics chosen for tracing and identification are the ones contained in ELV and WEEE from which discrimination is difficult for the existing sorting techniques due to their black colour.ANR TRIPTIC RECOR

Elaboration and Characterization of Traced Polypropylene with Rare Earth Oxides for Automatic Identification and Sorting of End-of-Life Plastics

Abstract The rare earth oxides can be used as tracers for the identification of polymer materials. This study focused on the detection of these particles and their effects on the mechanical and thermal properties of polypropylene (PP). A new method was carried out to increase the sorting selectivity of PP during end of life recycling process and to improve the efficiency of sorting and its high speed identification. The tests were realized in a test system device which allows the collection of static measurements of the samples spectrum through the use of energy dispersive X-ray fluorescence technology. Five of the seven tracers tested are clearly visible and distinguishable from the background sample by their Ka1 energy line at concentration levels of 0.1 and 0.145 wt%. For the two remaining tracers, their Ka1 energy lines come out at the same domain of energy as the source. Dispersion of rare earth oxides at 0.1 and 1 wt% do not have a significant impact on the crystallization and melting temperature as well as on the temperature of maximum decomposition rate. The addition of 1 wt% of rare earth oxides leads to a slight increase of the flexural modulus, whereas the addition of 0.1 and 1 wt% causes a decrease of the elongation at break. SEM images show a homogenous dispersion of tracers in the PP matrix.ANR TRIPTIC RECORD ADEME RENAULT SITA VEOLIA ENVIRONNEMEN

The ANTENATAL multicentre study to predict postnatal renal outcome in fetuses with posterior urethral valves: objectives and design

Abstract Background Posterior urethral valves (PUV) account for 17% of paediatric end-stage renal disease. A major issue in the management of PUV is prenatal prediction of postnatal renal function. Fetal ultrasound and fetal urine biochemistry are currently employed for this prediction, but clearly lack precision. We previously developed a fetal urine peptide signature that predicted in utero with high precision postnatal renal function in fetuses with PUV. We describe here the objectives and design of the prospective international multicentre ANTENATAL (multicentre validation of a fetal urine peptidome-based classifier to predict postnatal renal function in posterior urethral valves) study, set up to validate this fetal urine peptide signature. Methods Participants will be PUV pregnancies enrolled from 2017 to 2021 and followed up until 2023 in >30 European centres endorsed and supported by European reference networks for rare urological disorders (ERN eUROGEN) and rare kidney diseases (ERN ERKNet). The endpoint will be renal/patient survival at 2 years postnatally. Assuming α = 0.05, 1–β = 0.8 and a mean prevalence of severe renal outcome in PUV individuals of 0.35, 400 patients need to be enrolled to validate the previously reported sensitivity and specificity of the peptide signature. Results In this largest multicentre study of antenatally detected PUV, we anticipate bringing a novel tool to the clinic. Based on urinary peptides and potentially amended in the future with additional omics traits, this tool will be able to precisely quantify postnatal renal survival in PUV pregnancies. The main limitation of the employed approach is the need for specialized equipment. Conclusions Accurate risk assessment in the prenatal period should strongly improve the management of fetuses with PUV