25,926 research outputs found
Accuracy of estimating the masses of Phobos and Deimos from multiple Viking orbiter encounters
The problem was investigated of estimating the masses of Phobos and Deimos from Doppler and onboard optical measurements during the Viking extended mission. A Kalman filter was used to analyze the effects of gravitational uncertainties and nongravitational accelerations. These accelerations destroy the dynamical integrity of the orbit, and multibatch or limited memory filtering is preferred to single batch processing. Optical tracking is essential to improve the relative orbit geometry. The masses can be determined to about 10% and 25% respectively for Phobos and Deimos, assuming satellite densities of about 3 gr/cu cm
NASTRAN cyclic symmetry capability
A development for NASTRAN which facilitates the analysis of structures made up of identical segments symmetrically arranged with respect to an axis is described. The key operation in the method is the transformation of the degrees of freedom for the structure into uncoupled symmetrical components, thereby greatly reducing the number of equations which are solved simultaneously. A further reduction occurs if each segment has a plane of reflective symmetry. The only required assumption is that the problem be linear. The capability, as developed, will be available in level 16 of NASTRAN for static stress analysis, steady state heat transfer analysis, and vibration analysis. The paper includes a discussion of the theory, a brief description of the data supplied by the user, and the results obtained for two example problems. The first problem concerns the acoustic modes of a long prismatic cavity imbedded in the propellant grain of a solid rocket motor. The second problem involves the deformations of a large space antenna. The latter example is the first application of the NASTRAN Cyclic Symmetry capability to a really large problem
Body and canard effects on an attached-flow maneuver wing at Mach 1.62
A wing-body-canard configuration was tested at a Mach number of 1.62 by using both a cambered and an uncambered wing. The cambered wing was designed to produce efficient high lift by using attached supercritical crossflow and was originally tested as an isolated wing. The uncambered wing has the same planform and essentially the same thickness distribution as the cambered wing. The experiment determined the effects of a body and canards on both wings. The experimental data showed that both the body and the canards influenced the wing pressure levels, but that the attached supercritical crossflow, which was achieved in the isolated cambered-wing test, was maintained in the presence of a body and canards. Tables of experimental pressure, force, and moment data are included, as well as photographs of oil flow patterns on the upper surface
Recommended from our members
The information-related behaviour of emerging artists and designers Inspiration and guidance for new practitioners
Purpose – This paper aims to report an empirical study of the information-related behaviour of emerging artists and designers. It also aims to add to understanding of the information behaviour of the group both as practising artists (a little understood category of information users), and also as “new practitioners”.
Design/methodology/approach – A literature analysis is used to guide creation of an online questionnaire, eliciting both qualitative and quantitative data. A total of 78 practising artists participated, all having graduated in the seven years prior to the survey.
Findings – The group have generally the same information practices as more established artists. They place reliance on internet and social networks, while also using traditional printed tools and libraries. Browsing is important, but not a predominant means of accessing information. Inspiration is found from a very diverse and idiosyncratic set of sources, often by serendipitous means. Their status as emergent practitioners means that their information behaviour is governed by cost factors, and by needs for career advice and interaction with peers.
Research limitations/implications – The study group are a convenience sample, all having access to the internet. No observation or interviews were carried out.
Practical implications – The results will provide guidance to academic and public librarians serving artist users, and to those providing career advice to them. It will also be valuable to those providing services to “new practitioners” in any field.
Originality/value – This is one of a very few papers reporting empirical studies of the information behaviour of artists, and has the largest sample size of any such study. It is one of a very few papers considering the information needs and behaviour of new practitioners
Supersonic, nonlinear, attached-flow wing design for high lift with experimental validation
Results of the experimental validation are presented for the three dimensional cambered wing which was designed to achieve attached supercritical cross flow for lifting conditions typical of supersonic maneuver. The design point was a lift coefficient of 0.4 at Mach 1.62 and 12 deg angle of attack. Results from the nonlinear full potential method are presented to show the validity of the design process along with results from linear theory codes. Longitudinal force and moment data and static pressure data were obtained in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.58, 1.62, 1.66, 1.70, and 2.00 over an angle of attack range of 0 to 14 deg at a Reynolds number of 2.0 x 10 to the 6th power per foot. Oil flow photographs of the upper surface were obtained at M = 1.62 for alpha approx. = 8, 10, 12, and 14 deg
Measurement of Newtonian fluid slip using a torsional ultrasonic oscillator
The composite torsional ultrasonic oscillator, a versatile experimental
system, can be used to investigate slip of Newtonian fluid at a smooth surface.
A rigorous analysis of slip-dependent damping for the oscillator is presented.
Initially, the phenomenon of finite surface slip and the slip length are
considered for a half-space of Newtonian fluid in contact with a smooth,
oscillating solid surface. Definitions are revisited and clarified in light of
inconsistencies in the literature. We point out that, in general oscillating
flows, Navier's slip length b is a complex number. An intuitive velocity
discontinuity parameter of unrestricted phase is used to describe the effect of
slip on measurement of viscous shear damping. The analysis is applied to the
composite oscillator and preliminary experimental work for a 40 kHz oscillator
is presented. The Non-Slip Boundary Condition (NSBC) has been verified for a
hydrophobic surface in water to within ~60 nm of |b|=0 nm. Experiments were
carried out at shear rate amplitudes between 230 and 6800 /s, corresponding to
linear displacement amplitudes between 3.2 and 96 nm.Comment: Revised with minor edits for revie
Transition region features observed with Hinode/EIS
Two types of active region feature prominent at transition region
temperatures are identified in Hinode/EIS data of AR 10938 taken on 2007
January 20. The footpoints of 1 MK TRACE loops are shown to emit strongly in
emission lines formed at log T=5.4-5.8, allowing the temperature increase along
the footpoints to be clearly seen. A density diagnostic of Mg VII yields the
density in the footpoints, with one loop showing a decrease from 3x10^9 cm^-3
at the base to 1.5x10^9 cm^-3 at a projected height of 20 Mm. The second
feature is a compact active region transition region brightening which is
particularly intense in O V emission (log T=5.4) but also has a signature at
temperatures up to log T=6.3. The Mg VII diagnostic gives a density of 4x10^10
cm^-3, and emission lines of Mg VI and Mg VII show line profiles broadened by
50 km/s and wings extending beyond 200 km/s. Continuum emission in the short
wavelength band is also found to be enhanced, and is suggested to be free-bound
emission from recombination onto He^+.Comment: 11 pages, 9 figures, submitted to PASJ Hinode first results issu
Cooperating Agents for 3D Scientific Data Interpretation
Many organizations collect vast quantities of three-dimensional (3-D) scientific data in volumetric form for a range of purposes, including resource exploration, market forecasting, and process modelling. Traditionally, these data have been interpreted by human experts with only minimal software assistance. However, such manual interpretation is a painstakingly slow and tedious process. Moreover, since interpretation involves subjective judgements and each interpreter has different scientific knowledge and experience, formulation of an effective interpretation often requires the cooperation of numerous such experts. Hence, there is a pressing need for a software system in which individual interpretations can be generated automatically and then refined through the use of cooperative reasoning and information sharing. To this end, a prototype system, SurfaceMapper, has been developed in which a community of cooperating software agents automatically locate and display interpretations in a volume of 3-D scientific data. The challenges and experiences in designing and building such a system are discussed. Particular emphasis is given to the agents' interactions and an empirical evaluation of the effectiveness of different cooperation strategies is presented
- …