A Comparison of Coolant Options for Brayton Power Conversion Heat Rejection Systems

This paper describes potential heat rejection design concepts for Brayton power conversion systems. Brayton conversion systems are currently under study by NASA for Nuclear Electric Propulsion (NEP) and surface power applications. The Brayton Heat Rejection Subsystem (HRS) must dissipate waste heat generated by the power conversion system due to inefficiencies in the thermal-to-electric conversion process. Sodium potassium (NaK) and H2O are two coolant working fluids that have been investigated in the design of a pumped loop and heat pipe space HRS. In general NaK systems are high temperature (300 to 1000 K) low pressure systems, and H2O systems are low temperature (300 to 600 K) high pressure systems. NaK is an alkali metal with health and safety hazards that require special handling procedures. On the other hand, H2O is a common fluid, with no health hazards and no special handling procedures. This paper compares NaK and H20 for the HRS pumped loop coolant working fluid. A detailed Microsoft Excel (Microsoft Corporation, Redmond, WA) analytical model, HRS_Opt, was developed to evaluate the various HRS design parameters. It is capable of analyzing NaK or H2O coolant, parallel or series flow configurations, and numerous combinations of other key parameters (heat pipe spacing, diameter and radial flux, radiator facesheet thickness, fluid duct system pressure drop, system rejected power, etc.) of the HRS. This paper compares NaK against water for the HRS coolant working fluid with respect to the relative mass, performance, design and implementation issues between the two fluids

Estimating the Value of Medal Success at the 2010 Winter Olympic Games

We estimate Canadians’ willingness to pay (WTP) for success by Team Canada in the 2010 Winter Olympics. The Canadian government subsidized elite athletes in the run up to the 2010 Games through the Own the Podium program, which was designed to increase Canada’s medal count. WTP estimates from a contingent valuation method (CVM) study using data from nationally representative surveys before and after the Games suggest that Own the Podium generated intangible benefits of between 3 and 5 times its cost. The aggregate value of the intangible benefits generated by the program was between $719 million and$3.4 billion. Key Words: Olympic Games, contingent valuation method, willingness to pay

Vitamin D in Australia : issues and recommendations

BACKGROUND A significant number of Australians and people from specific groups within the community are suffering from vitamin D deficiency. It is no longer acceptable to assume that all people in Australia receive adequate vitamin D from casual exposure to sunlight.OBJECTIVE This article provides information on causes, consequences, treatment and prevention of vitamin D deficiency in Australia. DISCUSSION People at high risk of vitamin D deficiency include the elderly, those with skin conditions where avoidance of sunlight is required, dark skinned people (particularly women during pregnancy or if veiled) and patients with malabsorption, eg. coeliac disease. For most people, deficiency can be prevented by 5&ndash;15 minutes exposure of face and upper limbs to sunlight 4&ndash;6 times per week. If this is not possible then a vitamin D supplement of at least 400 IU* per day is recommended. In cases of established vitamin D deficiency, supplementation with 3000-5000 IU per day for at least 1 month is required to replete body stores. Increased availability of larger dose preparations of cholecalciferol would be a useful therapy in the case of severe deficiencies. * 40 IU (international units) = 1 &micro;g<br /

3D-XY critical fluctuations of the thermal expansivity in detwinned YBa2Cu3O7-d single crystals near optimal doping

The strong coupling of superconductivity to the orthorhombic distortion in YBa2Cu3O7-d makes possible an analysis of the superconducting fluctuations without the necessity of subtracting any background. The present high-resolution capacitance dilatometry data unambiguously demonstrate the existence of critical, instead of Gaussian, fluctuations over a wide temperature region (+/- 10 K) around Tc. The values of the amplitude ratio A+/A-=0.9-1.1 and the leading scaling exponent |alpha|<0.018, determined via a least-squares fit of the data, are consistent with the 3D-XY universality class. Small deviations from pure 3D-XY behavior are discussed.Comment: 11 pages including three figure

An assessment of chemical contaminants in the marine sediments of southwest Puerto Rico

This report summarizes the results of a characterization of chemical contaminants in the sediments in southwest Puerto Rico. The report is part of a project to integrate various analytical specialties to assess linkages between chemical contaminants and the condition of coral reefs. In this phase of the project, over 120 chemical contaminants were analyzed in sediments collected, including a number of organic (e.g., hydrocarbons), inorganic (e.g., metals), and biological (bacterial) compounds/analytes. The report also provides a preliminary analysis of the association between sediment contaminants and coral species richness. Overall, the levels of chemical contaminants in the study area between Guanica Bay and the town of La Parguera were fairly low. At most of the sites sampled, particularly adjacent to the town of La Parguera, concentrations of organic and inorganic contaminants were below the median values from NOAA’s National Status and Trends Program, which monitors the Nation’s coastal and estuarine waters for chemical contaminants. Elevated levels of a number of contaminant classes were seen at the two sites sampled within Guanica Bay. An initial analysis of modeled PAH (hydrocarbon) data and coral species richness (reef building species) indicated a strong negative correlation between the presence of PAHs in the sediments and coral species richness. Additional work is needed to assess possible reasons for this observed pattern. (PDF contains 126 pages)

AN ANALYSIS OF SAFETY CULTURE & SAFETY TRAINING: COMPARING THE IMPACT OF UNION, NON-UNION, AND RIGHT TO WORK CONSTRUCTION VENUES

The construction industry is one of the most dangerous sectors of the US economy. As such, the safety attitudes and climate within small (residential) contracting firms may play a role in providing a safe culture and working environment. The intent of this practitioner-based research study is to compare and determine if there is a difference in safety practices—based on documented field inspections and their related original number of violations observed by OSHA—between union residential carpentry contractors in the St. Louis area and: 1) non-union residential carpentry contractors in the St. Louis area; 2) non-union residential carpentry contractors across Missouri; and 3) non-union carpentry contractors in the four contiguous Right to Work (Nebraska, Kansas, Oklahoma, and Arkansas) states to Missouri, solely under federal OSHA compliance. Three separate T-tests (for independent samples) were utilized to measure the outcomes of the various groups observe