871 research outputs found
Measuring Group Velocity in Seismic Noise Correlation Studies Based on Phase Coherence and Resampling Strategies
Seismic noise cross correlation studies are of increasing importance in the seismological research community due to the ubiquity of noise sources and advances on how to use the seismic noise wave field for structural imaging and monitoring purposes. Stacks of noise cross correlations are now routinely used to extract empirical Green's functions between station pairs. In regional and global scale studies, mostly surface waves are extracted due to their dominance in seismic noise wave fields. Group arrival times measured from the time-frequency representation of frequency dispersive surface waves are further used in tomographic inversions to image seismic structure. Often, the group arrivals are not clearly identified or ambiguous depending on the signal and noise characteristics. Here, we present a procedure to robustly measure group velocities using the time-frequency domain phase-weighted stack (PWS) combined with data resampling and decision strategies. The time-frequency PWS improves signal extraction through incoherent signal attenuation during the stack of the noise cross correlations. Resampling strategies help to identify signals robust against data variations and to assess their errors. We have gathered these ingredients in an algorithm where the decision strategies and tuning parameters are reduced for semiautomated processing schemes. Our numerical and field data examples show a robust assignment of surface-wave group arrivals. The method is computational efficient thanks to an implementation based on pseudoanalytic frames of wavelets and enables processing large amounts of data.This work was supported in part by the Project MISTERIOS under Grant CGL2013-48601-C2-1-R, in part by the MIMOSA under Grant ANR-14-CE01-0012, in part by the COST Action ES1401 TIDES, in part by AGAUR, and in part by the FP7 Marie Curie Project through SV's Beatriu de Pinos Fellowship under Contract 600385. This is IPGP contribution 3814.Peer reviewe
New generation CAD-CAM materials for implant-supported definitive frameworks fabricated by using subtractive technologies
Innovations in digital manufacturing enabled the fabrication of implant-supported fixed dental prostheses (ISFDPs) in a wide variety of recently introduced materials. Computer-aided design and computer-aided manufacturing (CAD-CAM) milling allows the fabrication of ISFDPs with high accuracy by reducing the fabrication steps of large-span frameworks. The longevity of ISFDPs depends on the overall mechanical properties of the framework material including its fit, and the physical properties of the veneering material and its bond with the framework. This comprehensive review summarizes the recent information on millable CAD-CAM framework materials such as pre-sintered soft alloys, fiber-reinforced composite resins, PEEK, and PEKK in high-performance polymer family, and 4Y-TZP. Even though promising results have been obtained with the use of new generation millable CAD-CAM materials for ISFDPs, clinical studies are lacking and future research should focus on the overall performance of these millable materials in both static and dynamic conditions
Depolarization nearfield scanning optical microscopy: influence of wavelength and tip-shape on the lateral resolution
Detection of microseismic compressional (P) body waves aided by numerical modeling of oceanic noise sources
Among the different types of waves embedded in seismic noise, body waves present appealing properties but are still challenging to extract. Here we first validate recent improvements in numerical modeling of microseismic compressional (P) body waves and then show how this tool allows fast detection and location of their sources. We compute sources at ~0.2 Hz within typical P teleseismic distances (30-90°) from the Southern California Seismic Network and analyze the most significant discrete sources. The locations and relative strengths of the computed sources are validated by the good agreement with beam-forming analysis. These 54 noise sources exhibit a highly heterogeneous distribution, and cluster along the usual storm tracks in the Pacific and Atlantic oceans. They are mostly induced in the open ocean, at or near water depths of 2800 and 5600 km, most likely within storms or where ocean waves propagating as swell meet another swell or wind sea. We then emphasize two particularly strong storms to describe how they generate noise sources in their wake. We also use these two specific noise bursts to illustrate the differences between microseismic body and surface waves in terms of source distribution and resulting recordable ground motion. The different patterns between body and surface waves result from distinctive amplification of ocean wave-induced pressure perturbation and different seismic attenuation. Our study demonstrates the potential of numerical modeling to provide fast and accurate constraints on where and when to expect microseismic body waves, with implications for seismic imaging and climate studies. © 2013. American Geophysical Union. All Rights Reserved.This work was supported by the European Research Council (IOWAGA project), the Program >Investment for the future” Labex Mer (grant ANR-10-LABX-19-01), and the Consolider-Ingeno (Topo-Iberia). M.O. performed the data analysis while visiting the Domaines Océanique laboratorPeer Reviewe
How much averaging is necessary to cancel out cross-terms in noise correlation studies?
We present an analytical approach to jointly estimate the correlation window length and number of correlograms to stack in ambient noise correlation studies to statistically ensure that noise cross-terms cancel out to within a chosen threshold. These estimates provide the minimum amount of data necessary to extract coherent signals in ambient noise studies using noise sequences filtered in a given frequency bandwidth. The inputs for the estimation process are (1) the variance of the cross-correlation energy density calculated over an elementary time length equal to the largest period present in the filtered data and (2) the threshold below which the noise cross-terms will be in the final stacked correlograms. The presented theory explains how to adjust the required correlation window length and number of stacks when changing from one frequency bandwidth to another. In addition, this theory provides a simple way to monitor stationarity in the noise. The validity of the deduced expressions have been confirmed with numerical cross-correlation tests using both synthetic and field data.Peer Reviewe
Testing the applicability of ambient noise methods in zones with different degree of anthropogenic sources
EGU2020: Sharing Geoscience Online, 4-8 may 2020The general objectives of the ¿Seismic Ambient Noise Imaging and Monitoring of Shallow Structures¿ (SANIMS) project, funded by the Spanish Ministry of Science, Research and Innovation (Ref.: RTI2018-095594-B-I00), are focused into the application and development of methods based on ambient noise seismic data recorded by dense networks to image and monitor natural and human-altered environments. To achieve this objective, temporal seismic networks have been installed since late 2019 in two very different settings; the Cerdanya Basin, a sedimentary basin located in the eastern Pyrenees and the city of Barcelona.
Regarding the Cerdanya Basin, a relatively unaltered setting, a network of up to 25 broad-band stations has been installed for a period of one year. Additionally, a high resolution grid of seismic nodes will be deployed for 2 months in the central part of the basin, with interstation distances of 1.5 km. In order to constraint the uppermost crustal structure using ambient noise, vertical component recordings will be processed using the phase cross-correlation and time-frequency domain phase-weighted stacking to extract fundamental mode Rayleigh waves. The surface waves will then be used to measure inter-station group and phase velocity dispersion curves that will be inverted using the Fast Marching Surface Tomography method. Depending on data quality, we will also process the horizontal components to extract Love waves for joint inversions with Rayleigh waves to constrain radial anisotropy and/or the application of new strategies to perform attenuation tomography.
Regarding areas strongly altered by human activity, we have deployed a network of 15 short-period stations within the city of Barcelona, in most of the cases installed in the basement of secondary schools, for a duration of 9-12 months. The objective of this deployment is twofold; acquire new valuable scientific data and introduce the students in an Earth Science research project. Although the Barcelona area has been investigated using MHVSR methods by different authors, the new data acquired by the SANIMS project will expand the available data and will allow to analyze the time variability of the measurements. This new dataset will also be used to analyze the applicability of the methods based on Rayleigh wave ellipticity inversion of ambient noise and earthquake data to provide S-velocity depth profiles. Under the assumption of an isotropic horizontally layered medium, the ellipticity inversion is not affected by the directivity of the diffusive noise wave field and seems therefore to be a good option to determine local S-velocity depth profiles in areas with little lateral inhomogeneities and uneven distribution of noise sources.
We expect that the use of ambient noise methods will allow to map the basement and to obtain new higher resolution ambient noise tomographic images of the upper crust in the Cerdanya Basin and to better constrain the subsoil properties of Barcelona, hence improving the existing seismic hazard maps. Besides, comparing the results in both areas will allow to compare the performance of the different methods based on ambient noise in quiet and noisy areas
Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials.
STATEMENT OF PROBLEM
Which disinfection protocol provides optimal water contact angle and microhardness for computer-aided design and computer-aided manufacturing (CAD-CAM) polymethyl methacrylate (PMMA) materials is unclear.
PURPOSE
The purpose of this in vitro study was to evaluate the effect of different disinfection protocols (1% sodium hypochlorite, denture cleanser gel, and effervescent tablet) on the water contact angle and microhardness of different CAD-CAM PMMA denture base materials by comparing them with a heat-polymerized PMMA.
MATERIAL AND METHODS
Disk-shaped specimens (Ø10×2 mm) were fabricated from 3 different CAD-CAM PMMAs-AvaDent (AV), Merz M-PM (M-PM), and Polident (Poli)-and a heat-polymerized PMMA (Vynacron) (CV) (n=21). Three disinfection protocols (1% sodium hypochlorite [HC], denture cleanser gel [GEL], an effervescent tablet [TAB]) were applied to simulate 180 days of cleansing. The water contact angle and microhardness of specimens were measured before and after disinfection and compared by using a 2-way ANOVA (α=.05).
RESULTS
For water contact angle, material (P=.010) and disinfection protocol (P=.002) had a significant effect. The material (P<.001), disinfection protocol (P=.001), and their interaction (P<.001) significantly affected the microhardness after disinfection. When the condition after disinfection was compared with that before disinfection, the water contact angle increased significantly in all material-disinfection protocol pairs (P≤.025), and microhardness increased significantly in all material-disinfection protocol pairs (P≤.040), except for GEL- (P=.689) or TAB-applied (P=.307) AV, HC-applied M-PM (P=.219), and TAB-applied Poli (P=.159).
CONCLUSIONS
The material and disinfection protocol affected the water contact angle of all tested PMMAs after disinfection, resulting in more hydrophobic surfaces for heat-polymerized or CAD-CAM PMMAs. The microhardness of heat-polymerized PMMA was less than that of all CAD-CAM PMMAs after disinfection, regardless of the protocol
Effect of thermocycling on the surface properties of CAD-CAM denture base materials after different surface treatments
Purpose: To evaluate the effect of thermocycling on the water contact angle (WCA), surface roughness (SR), and microhardness (MH) of different CAD-CAM PMMA denture base materials after different surface treatments (conventional laboratory polishing, polishing kit, or surface sealant).
Materials and methods: Disk-shaped specimens (10 × 2 mm) of 3 different CAD-CAM PMMAs, AvaDent (AV); Merz M-PM (M-PM); Polident (Poli), and a conventional heat-polymerized PMMA (Vynacron) (CV) (n=21) were divided into 3 different surface treatment groups (n=7): conventional laboratory polishing (CLP), polishing with acrylic resin polisher kit (PK), and a surface sealant (Palaseal) (SSC). Stereomicroscopic images were taken both before and after thermocycling. WCA, SR, and MH of all specimens were measured before and after thermocycling and compared by using a 2-way ANOVA (α=0.05).
Results: After thermocycling, WCA significantly increased for CLP- or PK -applied (P<.001) specimens of all materials and SSC-applied M-PM (P=.002), SR significantly increased for CLP-applied M-PM (P=.027) and PK-applied Poli (P=.041), and MH significantly decreased for CLP- or PK-applied AV (P = .001, P < .001, respectively), CV (P=.033, P=.023, respectively), and M-PM (P=.003, P=.001, respectively), SSC-applied M-PM (P<.001), and CLP-applied Poli (P<.001). Stereomicroscopic images revealed rougher surfaces for PK-applied specimens.
Conclusions: After thermocycling, surface treatment had a significant effect on water contact angle and surface roughness. CLP or PK application resulted in hydrophobic surfaces compared with before thermocycling. CLP or SSC application on CAD-CAM PMMAs resulted in smoother surfaces. Thermocycling lowered the microhardness of all PMMAs, and the decrease was significant in CLP- or PK-applied PMMAs, except for PK-applied Poli
The S-Transform From a Wavelet Point of View
Abstract—The -transform is becoming popular for time-frequency
analysis and data-adaptive filtering thanks to its simplicity.
While this transform works well in the continuous domain, its discrete
version may fail to achieve accurate results. This paper compares
and contrasts this transform with the better known continuous
wavelet transform, and defines a relation between both. This
connection allows a better understanding of the -transform, and
makes it possible to employ the wavelet reconstruction formula as
a new inverse -transform and to propose several methods to solve
some of the main limitations of the discrete -transform, such as
its restriction to linear frequency sampling.This work was supported by the projects SigSensual
ref. CTM2004-04510-C03-02 and NEAREST CE-037110. The work of
M. Schimmel was supported through the Ramon y Cajal and the Consolider-Ingenio
2010 Nr. CSD2006-00041 program.Peer reviewe
Changes in oro-facial function and hand-grip strength during a 2-year observation period after stroke
Objectives: Recovery from stroke-related oro-facial impairment has rarely been investigated. In this longitudinal study chewing efficiency, maximum lip and bite force as well as masseter muscle thickness were evaluated and compared with hand-grip force. Materials and methods: Thirty-one hospitalized stroke patients and 24 controls were recruited for this cohort study with 2-year follow-up. Chewing efficiency was evaluated with a color mixing ability test, lip forces with a traction dynamometer, bite force with a digital gauge, masseter muscle thickness using ultrasound measurements and grip strength with a hand dynamometer. Results: During the 2-year observation period, patients were evaluated four times. A total of 21 patients dropped out of the study. Stroke patients showed significantly impaired chewing efficiency and lower lip forces than controls with no significant improvement over time. Bite forces were not different between ipsi- and contralesional sides, in contrast to contralesional hand-grip strength which was significantly impaired and did not improve during the observation period. On the first examination with a median of 40days after stroke, masseter thickness was reduced contralesional, but did not continue to show significant side-differences during follow-up. Conclusions: Stroke affects the upper limb and the masseter muscles differently on a functional and morphological level. Further research is needed to evaluate the predictive value of oro-facial parameters on functional outcome after stroke. Clinical relevance: Impaired chewing efficiency and reduced lip force are quantifiable symptoms in stroke patients which seem not to improve in absence of oro-facial rehabilitation procedure
- …