Characterization of membrane adsorbers for contaminant removal

[no abstract

A mini-module with built-in spacers for high-throughput ultrafiltration

Ultrafiltration membrane modules suffer from a permeate flow decrease arising during filtration and caused by concentration polarization and fouling in, e.g., fermentation broth purification. Such performance losses are frequently mitigated by manipulating the hydrodynamic conditions at the membrane-fluid interface using, e.g., mesh spacers acting as static mixers. This additional element increases manufacturing complexity while improving mass transport in general, yet accepting their known disadvantages such as less transport in dead zones. However, the shape of such spacers is limited to the design of commercially available spacer geometries. Here, we present a methodology to design an industrially relevant mini-module with an optimized built-in 3D spacer structure in a flat-sheet ultrafiltration membrane module to eliminate the spacer as a separate part. Therefore, the built-in structures have been conceptually implemented through an in-silico design in compliance with the specifications for an injection molding process. Ten built-in structures were investigated in a digital twin of the mini-module by 3D-CFD simulations to select two options, which were then compared to the empty feed channel regarding mass transfer. Subsequently, the simulated flux increase was experimentally verified during bovine serum albumin (BSA) filtration. The new built-in sinusoidal corrugation outperforms conventional mesh spacer inlays by up to 30% higher permeation rates. The origin of these improvements is correlated to the flow characteristics inside the mini-module as visualized online and in-situ by low-field and high-field magnetic resonance imaging velocimetry (flow-MRI) during pure water permeation

Membrane chromatography cassettes for bind and elute applications of viruses and large proteins

For flow-through polishing applications, membrane adsorbers have become a well-established technology. However, there is an increasing demand for bind and elute purifications for larger targets as adeno- and lentiviruses, virus like particles (VLP) and influenza. The reason is the higher binding capacity of macroporous membranes compared to conventional resins having much smaller pores and excluding them by size. But capture applications with such devices suffered from the current size limitation of 5 liters. Here we describe a modular cassette system which has been tested for scale-up and flow performance in comparison with void volume optimized capsules. The goals were to create a system up to 20 L membrane volume which can be optionally expanded to ~100 liter and, be able adapt exactly to the size needed (modular), using the same 4 and 8 mm bed height as the capsules and membranes for single- or intra batch re-use

Membrane Based Measurement Technology for in situ Monitoring of Gases in Soil

The representative measurement of gas concentration and fluxes in heterogeneous soils is one of the current challenges when analyzing the interactions of biogeochemical processes in soils and global change. Furthermore, recent research projects on CO2-sequestration have an urgent need of CO2-monitoring networks. Therefore, a measurement method based on selective permeation of gases through tubular membranes has been developed. Combining the specific permeation rates of gas components for a membrane and Dalton's principle, the gas concentration (or partial pressure) can be determined by the measurement of physical quantities (pressure or volume) only. Due to the comparatively small permeation constants of membranes, the influence of the sensor on its surrounding area can be neglected. The design of the sensor membranes can be adapted to the spatial scale from the bench scale to the field scale. The sensitive area for the measurement can be optimized to obtain representative results. Furthermore, a continuous time-averaged measurement is possible where the time for averaging is simply controlled by the wall-thickness of the membrane used. The measuring method is demonstrated for continuous monitoring of O2 and CO2 inside of a sand filled Lysimeter. Using three sensor planes inside the sand pack, which were installed normal to the gas flow direction and a reference measurement system, we demonstrate the accuracy of the gas-detection for different flux-based boundary conditions

Results from Canton Grisons of Switzerland suggest repetitive testing reduces SARS-CoV-2 incidence (February-March 2021).

In February 2021, in response to emergence of more transmissible SARS-CoV-2 virus variants, the Canton Grisons launched a unique RNA mass testing program targeting the labour force in local businesses. Employees were offered weekly tests free of charge and on a voluntary basis. If tested positive, they were required to self-isolate for ten days and their contacts were subjected to daily testing at work. Thereby, the quarantine of contact persons could be waved.Here, we evaluate the effects of the testing program on the tested cohorts. We examined 121,364 test results from 27,514 participants during February-March 2021. By distinguishing different cohorts of employees, we observe a noticeable decrease in the test positivity rate and a statistically significant reduction in the associated incidence rate over the considered period. The reduction in the latter ranges between 18 and 50%. The variability is partly explained by different exposures to exogenous infection sources (e.g., contacts with visiting tourists or cross-border commuters). Our analysis provides the first empirical evidence that applying repetitive mass testing to a real population over an extended period of time can prevent spread of COVID-19 pandemic. However, to overcome logistic, uptake, and adherence challenges it is important that the program is carefully designed and that disease incursion from the population outside of the program is considered and controlled

Plasmonic communications : light on a wire

The emerging field of plasmonics promises the generation, processing, transmission, sensing and detection of signals at optical frequencies along metallic surfaces much smaller than the wavelengths they carry. Plasmonic technology has applications in a wide range of fields, including biophotonics, sensing, chemistry and medicine. But perhaps the area where it will have the most profound impact is in optical communications, since plasmonic waves oscillate at optical frequencies and thus can carry information at optical bandwidths

The diet of a small group of extralimital giraffe

Giraffe are extralimital in the Eastern Cape Province, South Africa where recent local introductions have persisted despite limited research into their impact on the indigenous flora. The diet of 15 giraffe at the Shamwari Game Reserve was recorded by direct observation during summer (March/April) and winter (July/August) 2001, quantifying diet by frequency of occurrence (individual records scored and expressed as a percentage of the total). Preference indices were also calculated. Habitat use was measured by the number of hours giraffe fed in different habitats. The diet comprised of 14 plant species, the most important species being Rhus longispina (47.9%), Acacia karroo (25.7%) and Euclea undulata (17.6%). Importance of R. longispina, A. karroo and Tarchonanthus camphoratus fluctuated seasonally. Rhus longispina was more important in winter with a corresponding decrease in feeding on A. karroo. Tarchonanthus camphoratus was only consumed during summer. Acacia karroo thickets (previously disturbed areas) were utilized most (summer 12 h; winter 9 h), with alternative habitats utilized more often in winter than in summer. We suggest that the seasonal fluctuation in the importance of R. longispina & A. karroo reflects the deciduous nature of A. karroo